chip/src/plic.rs

//! Platform Level Interrupt Control peripheral driver.

use kernel::common::registers::{register_bitfields, register_structs, ReadOnly, ReadWrite};
use kernel::common::StaticRef;
use crate::plic_constants::*;
//use kernel::debug;

register_structs! {
    pub PlicRegisters {
        /// Interrupt Pending Register
        (RV_PLIC_IP_0_REG_OFFSET => pending: [ReadOnly<u32>; RV_PLIC_IP_MULTIREG_COUNT as usize]),
        /// Interrupt Source Register
        (RV_PLIC_LE_0_REG_OFFSET => source: [ReadWrite<u32>; RV_PLIC_LE_MULTIREG_COUNT as usize]),
        /// Interrupt Priority Registers
        (RV_PLIC_PRIO0_REG_OFFSET => priority: [ReadWrite<u32, priority::Register>; RV_PLIC_PARAM_NUM_SRC as usize]),
        (0x30C => _reserved0: [ReadWrite<u32>; 61]),
        /// Interrupt Enable Register
        (RV_PLIC_IE0_0_REG_OFFSET => enable: [ReadWrite<u32>; RV_PLIC_IE0_MULTIREG_COUNT as usize]),
        /// Priority Threshold Register
        (RV_PLIC_THRESHOLD0_REG_OFFSET => threshold: ReadWrite<u32, priority::Register>),
        /// Claim/Complete Register
        (RV_PLIC_CC0_REG_OFFSET => claim: ReadWrite<u32>),
        /// MSIP Register
        (RV_PLIC_MSIP0_REG_OFFSET => msip: ReadWrite<u32>),
        (RV_PLIC_MSIP0_REG_OFFSET + 4 => @END),
    }
}

register_bitfields![u32,
    priority [
        Priority OFFSET(0) NUMBITS(3) []
    ]
];

const PLIC_BASE: StaticRef<PlicRegisters> =
    unsafe { StaticRef::new(0x4101_0000 as *const PlicRegisters) };

/// Clear all pending interrupts.
pub unsafe fn clear_all_pending() {
    let _plic: &PlicRegisters = &*PLIC_BASE;
}

/// Enable all interrupts.
pub unsafe fn enable_all() {
    let plic: &PlicRegisters = &*PLIC_BASE;

    // USB hardware on current OT master branch seems to have
    // interrupt bugs: running Alarms causes persistent USB
    // CONNECTED interrupts that can't be masked from USBDEV and
    // cause the system to hang. So enable all interrupts except
    // for the USB ones. Some open PRs on OT fix this, we'll re-enable
    // USB interrurupts.
    //
    // https://github.com/lowRISC/opentitan/issues/3388
    plic.enable[0].set(0xFFFF_FFFF);
    plic.enable[1].set(0xFFFF_FFFF);
    plic.enable[2].set(0xFFFF_0000); // USB are 64-79

    // Set the max priority for each interrupt. This is not really used
    // at this point.
    for priority in plic.priority.iter() {
        priority.write(priority::Priority.val(3));
    }

    // Accept all interrupts.
    plic.threshold.write(priority::Priority.val(1));
}

/// Disable all interrupts.
pub unsafe fn disable_all() {
    let plic: &PlicRegisters = &*PLIC_BASE;
    for enable in plic.enable.iter() {
        enable.set(0);
    }
}

/// Get the index (0-256) of the lowest number pending interrupt, or `None` if
/// none is pending. RISC-V PLIC has a "claim" register which makes it easy
/// to grab the highest priority pending interrupt.
pub unsafe fn next_pending() -> Option<u32> {
    let plic: &PlicRegisters = &*PLIC_BASE;

    let claim = plic.claim.get();
    if claim == 0 {
        None
    } else {
        Some(claim)
    }
}

/// Signal that an interrupt is finished being handled. In Tock, this should be
/// called from the normal main loop (not the interrupt handler).
pub unsafe fn complete(index: u32) {
    let plic: &PlicRegisters = &*PLIC_BASE;
    plic.claim.set(index);
}

/// Return `true` if there are any pending interrupts in the PLIC, `false`
/// otherwise.
pub unsafe fn has_pending() -> bool {
    let plic: &PlicRegisters = &*PLIC_BASE;

    plic.pending.iter().fold(0, |i, pending| pending.get() | i) != 0
}