|  | /* | 
|  | * Copyright 2024 Google LLC | 
|  | * | 
|  | * Licensed under the Apache License, Version 2.0 (the "License"); | 
|  | * you may not use this file except in compliance with the License. | 
|  | * You may obtain a copy of the License at | 
|  | * | 
|  | *      http://www.apache.org/licenses/LICENSE-2.0 | 
|  | * | 
|  | * Unless required by applicable law or agreed to in writing, software | 
|  | * distributed under the License is distributed on an "AS IS" BASIS, | 
|  | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | 
|  | * See the License for the specific language governing permissions and | 
|  | * limitations under the License. | 
|  | */ | 
|  |  | 
|  | #include <inttypes.h> | 
|  | #include <limits.h> | 
|  |  | 
|  | #include "benchmarks/benchmark.h" | 
|  | #include "hw/top_matcha/sw/autogen/top_matcha.h" | 
|  | #include "sw/device/lib/base/math.h" | 
|  | #include "sw/device/lib/dif/dif_ml_top.h" | 
|  | #include "sw/device/lib/dif/dif_rv_plic.h" | 
|  | #include "sw/device/lib/dif/dif_rv_timer.h" | 
|  | #include "sw/device/lib/runtime/hart.h" | 
|  | #include "sw/device/lib/runtime/irq.h" | 
|  | #include "sw/device/lib/runtime/log.h" | 
|  | #include "sw/device/lib/runtime/print.h" | 
|  | #include "sw/device/lib/testing/test_framework/check.h" | 
|  | #include "sw/device/lib/testing/test_framework/ottf_test_config.h" | 
|  | #include "sw/device/lib/testing/test_framework/status.h" | 
|  | #include "sw/device/lib/testing/test_framework/test_util.h" | 
|  |  | 
|  | #define STRINGIZE(x) #x | 
|  | #define STR(x) STRINGIZE(x) | 
|  |  | 
|  | OTTF_DEFINE_TEST_CONFIG(); | 
|  |  | 
|  | static dif_rv_plic_t plic_smc; | 
|  | static dif_rv_timer_t rv_timer; | 
|  | static dif_uart_t smc_uart; | 
|  | static dif_ml_top_t ml_top; | 
|  |  | 
|  | volatile bool ml_top_finish_done = false; | 
|  |  | 
|  | void _print64(const char* header, uint64_t number) { | 
|  | uint32_t number_low = number & 0xFFFFFFFF; | 
|  | uint32_t number_hi = number >> 32; | 
|  | LOG_INFO("%s: 0x%08x%08x", header, number_hi, number_low); | 
|  | } | 
|  |  | 
|  | void ottf_external_isr(void) { | 
|  | dif_rv_plic_irq_id_t interrupt_id; | 
|  | CHECK_DIF_OK(dif_rv_plic_irq_claim(&plic_smc, kTopMatchaPlicTargetIbex0Smc, | 
|  | &interrupt_id)); | 
|  |  | 
|  | top_matcha_plic_peripheral_smc_t peripheral_id = | 
|  | top_matcha_plic_interrupt_for_peripheral_smc[interrupt_id]; | 
|  | switch (peripheral_id) { | 
|  | case kTopMatchaPlicPeripheralMlTop: { | 
|  | switch (interrupt_id) { | 
|  | case kTopMatchaPlicIrqIdMlTopFinish: | 
|  | ml_top_finish_done = true; | 
|  | break; | 
|  | default: | 
|  | CHECK(false, "Unhandled ML_TOP interrupt"); | 
|  | } | 
|  | CHECK_DIF_OK(dif_ml_top_reset_ctrl_en(&ml_top)); | 
|  | CHECK_DIF_OK(dif_ml_top_irq_acknowledge_all(&ml_top)); | 
|  | break; | 
|  | } | 
|  | default: | 
|  | CHECK(false, "Unhandled peripheral! %d", peripheral_id); | 
|  | } | 
|  |  | 
|  | CHECK_DIF_OK(dif_rv_plic_irq_complete(&plic_smc, kTopMatchaPlicTargetIbex0Smc, | 
|  | interrupt_id)); | 
|  | } | 
|  |  | 
|  |  | 
|  | void _ottf_main(void) { | 
|  | // Initialize the SMC UART to enable logging for non-DV simulation platforms. | 
|  | if (kDeviceType != kDeviceSimDV) { | 
|  | init_uart(TOP_MATCHA_SMC_UART_BASE_ADDR, &smc_uart); | 
|  | } | 
|  |  | 
|  | CHECK_DIF_OK(dif_rv_plic_init( | 
|  | mmio_region_from_addr(TOP_MATCHA_RV_PLIC_SMC_BASE_ADDR), &plic_smc)); | 
|  | CHECK_DIF_OK(dif_ml_top_init( | 
|  | mmio_region_from_addr(TOP_MATCHA_ML_TOP_CORE_BASE_ADDR), &ml_top)); | 
|  | CHECK_DIF_OK(dif_rv_timer_init( | 
|  | mmio_region_from_addr(TOP_MATCHA_RV_TIMER_SMC_BASE_ADDR), &rv_timer)); | 
|  |  | 
|  | CHECK_DIF_OK(dif_ml_top_irq_set_enabled(&ml_top, kDifMlTopIrqFinish, | 
|  | kDifToggleEnabled)); | 
|  | CHECK_DIF_OK(dif_rv_plic_irq_set_priority( | 
|  | &plic_smc, kTopMatchaPlicIrqIdMlTopFinish, kDifRvPlicMaxPriority)); | 
|  | CHECK_DIF_OK(dif_rv_plic_irq_set_enabled( | 
|  | &plic_smc, kTopMatchaPlicIrqIdMlTopFinish, kTopMatchaPlicTargetIbex0Smc, | 
|  | kDifToggleEnabled)); | 
|  |  | 
|  | dif_rv_timer_tick_params_t tick_params; | 
|  | CHECK_DIF_OK(dif_rv_timer_approximate_tick_params(kClockFreqPeripheralHz, | 
|  | 1000000, &tick_params)); | 
|  | CHECK_DIF_OK(dif_rv_timer_init( | 
|  | mmio_region_from_addr(TOP_MATCHA_RV_TIMER_SMC_BASE_ADDR), &rv_timer)); | 
|  | CHECK_DIF_OK(dif_rv_timer_set_tick_params(&rv_timer, 0, tick_params)); | 
|  | CHECK_DIF_OK( | 
|  | dif_rv_timer_counter_set_enabled(&rv_timer, 0, kDifToggleEnabled)); | 
|  |  | 
|  | irq_global_ctrl(true); | 
|  | irq_external_ctrl(true); | 
|  |  | 
|  | LOG_INFO("========== Begin Benchmark (%s) ==========", STR(BENCHMARK_NAME)); | 
|  |  | 
|  | // start kelvin | 
|  | ml_top_finish_done = false; | 
|  | uint64_t timer_start; | 
|  | CHECK_DIF_OK(dif_rv_timer_counter_read(&rv_timer, 0, &timer_start)); | 
|  | CHECK_DIF_OK(dif_ml_top_release_ctrl_en(&ml_top)); | 
|  |  | 
|  | // wfi | 
|  | while (!ml_top_finish_done) { | 
|  | wait_for_interrupt(); | 
|  | } | 
|  | uint64_t timer_finish; | 
|  | CHECK_DIF_OK(dif_rv_timer_counter_read(&rv_timer, 0, &timer_finish)); | 
|  |  | 
|  | BenchmarkOutputHeader* output_header_ptr = | 
|  | (BenchmarkOutputHeader*)((TOP_MATCHA_ML_TOP_DMEM_BASE_ADDR + | 
|  | TOP_MATCHA_RAM_ML_DMEM_SIZE_BYTES) - | 
|  | 0x40); | 
|  |  | 
|  | if (output_header_ptr->return_code) { | 
|  | LOG_FATAL("Kelvin returned an error: %d", output_header_ptr->return_code); | 
|  | } | 
|  | uint32_t iterations = output_header_ptr->iterations; | 
|  | uint64_t cycles = output_header_ptr->cycles; | 
|  | uint64_t average_cycles = udiv64_slow(cycles, iterations, NULL); | 
|  | uint64_t wall_time_us = timer_finish - timer_start; | 
|  | uint64_t average_wall_time_us = udiv64_slow(wall_time_us, iterations, NULL); | 
|  | uint32_t mismatch_count = output_header_ptr->mismatch_count; | 
|  | LOG_INFO("Iterations: %d", iterations); | 
|  | _print64("Total Cycles", cycles); | 
|  | _print64("Average Cycles per Iteration", average_cycles); | 
|  | _print64("Wall time (us)", wall_time_us); | 
|  | _print64("Wall time per Iteration (us)", average_wall_time_us); | 
|  | LOG_INFO("Mismatch count: %d", mismatch_count); | 
|  | LOG_INFO("========== End Benchmark =========="); | 
|  | while (true) { | 
|  | wait_for_interrupt(); | 
|  | }; | 
|  | } |