sw/device/examples/hello_world/hello_world.c

// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0

#include "sw/device/examples/demos.h"
#include "sw/device/lib/arch/device.h"
#include "sw/device/lib/dif/dif_gpio.h"
#include "sw/device/lib/dif/dif_pinmux.h"
#include "sw/device/lib/dif/dif_spi_device.h"
#include "sw/device/lib/dif/dif_uart.h"
#include "sw/device/lib/runtime/hart.h"
#include "sw/device/lib/runtime/log.h"
#include "sw/device/lib/runtime/print.h"
#include "sw/device/lib/testing/pinmux_testutils.h"
#include "sw/device/lib/testing/test_framework/check.h"
#include "sw/device/lib/testing/test_framework/ottf_test_config.h"

#include "hw/top_matcha/sw/autogen/top_matcha.h"

OTTF_DEFINE_TEST_CONFIG();

static dif_gpio_t gpio;
static dif_pinmux_t pinmux;
static dif_spi_device_handle_t spi;
static dif_uart_t uart;

void _ottf_main(void) {
  CHECK_DIF_OK(dif_pinmux_init(
      mmio_region_from_addr(TOP_MATCHA_PINMUX_AON_BASE_ADDR), &pinmux));
  CHECK_DIF_OK(dif_uart_init(
      mmio_region_from_addr(TOP_MATCHA_UART0_BASE_ADDR), &uart));
  CHECK_DIF_OK(
      dif_uart_configure(&uart, (dif_uart_config_t){
                                    .baudrate = kUartBaudrate,
                                    .clk_freq_hz = kClockFreqPeripheralHz,
                                    .parity_enable = kDifToggleDisabled,
                                    .parity = kDifUartParityEven,
                                }));
  base_uart_stdout(&uart);

  pinmux_testutils_init(&pinmux);

  CHECK_DIF_OK(dif_spi_device_init_handle(
      mmio_region_from_addr(TOP_MATCHA_SPI_DEVICE_BASE_ADDR), &spi));
  dif_spi_device_config_t spi_config = {
      .clock_polarity = kDifSpiDeviceEdgePositive,
      .data_phase = kDifSpiDeviceEdgeNegative,
      .tx_order = kDifSpiDeviceBitOrderMsbToLsb,
      .rx_order = kDifSpiDeviceBitOrderMsbToLsb,
      .device_mode = kDifSpiDeviceModeGeneric,
      .mode_cfg =
          {
              .generic =
                  {
                      .rx_fifo_commit_wait = 63,
                      .rx_fifo_len = kDifSpiDeviceBufferLen / 2,
                      .tx_fifo_len = kDifSpiDeviceBufferLen / 2,
                  },
          },
  };
  CHECK_DIF_OK(dif_spi_device_configure(&spi, spi_config));

  CHECK_DIF_OK(
      dif_gpio_init(mmio_region_from_addr(TOP_MATCHA_GPIO_BASE_ADDR), &gpio));
  // Enable GPIO: 0-7 is output; 8-11 is input.
  // TODO(ykwang): Apply AntMicro's LED fix for now. Need to revert this and
  // apply the upstream change in the next codebase upleveling.
  CHECK_DIF_OK(dif_gpio_output_set_enabled_all(&gpio, 0x0FF00));

  // Add DATE and TIME because I keep fooling myself with old versions
  LOG_INFO("Hello World!");
  LOG_INFO("Built at: " __DATE__ ", " __TIME__);

  demo_gpio_startup(&gpio);

  // Now have UART <-> Buttons/LEDs demo
  // all LEDs off
  CHECK_DIF_OK(dif_gpio_write_all(&gpio, 0x0000));
  LOG_INFO("Try out the switches on the board");
  LOG_INFO("or type anything into the console window.");
  LOG_INFO("The LEDs show the ASCII code of the last character.");

  CHECK_DIF_OK(dif_spi_device_send(&spi, "SPI!", 4,
                                   /*bytes_sent=*/NULL));

  uint32_t gpio_state = 0;
  while (true) {
    busy_spin_micros(10 * 1000);  // 10 ms
    gpio_state = demo_gpio_to_log_echo(&gpio, gpio_state);
    demo_spi_to_log_echo(&spi);
    demo_uart_to_uart_and_gpio_echo(&uart, &gpio);
  }
}