| // Copyright lowRISC contributors. |
| // Licensed under the Apache License, Version 2.0, see LICENSE for details. |
| // SPDX-License-Identifier: Apache-2.0 |
| |
| #ifndef OPENTITAN_SW_DEVICE_LIB_DIF_DIF_LC_CTRL_H_ |
| #define OPENTITAN_SW_DEVICE_LIB_DIF_DIF_LC_CTRL_H_ |
| |
| /** |
| * @file |
| * @brief <a href="/hw/ip/lc_ctrl/doc/">Lifecycle Controller</a> Device |
| * Interface Functions |
| */ |
| |
| #include <stdbool.h> |
| #include <stdint.h> |
| |
| #include "sw/device/lib/base/macros.h" |
| #include "sw/device/lib/base/mmio.h" |
| #include "sw/device/lib/dif/dif_base.h" |
| |
| #include "sw/device/lib/dif/autogen/dif_lc_ctrl_autogen.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif // __cplusplus |
| |
| /** |
| * A lifecycle controller status code. |
| * |
| * See `dif_lc_ctrl_get_status()`. |
| */ |
| typedef enum dif_lc_ctrl_status_code { |
| /** |
| * Indicates that the controller has been successfully initialized. |
| */ |
| kDifLcCtrlStatusCodeInitialized, |
| /** |
| * Indicates that the controller has been successfully initialized |
| * and is ready to accept a life cycle transition command. |
| */ |
| kDifLcCtrlStatusCodeReady, |
| /** |
| * Indicates that the last lifecycle transition succeeded. |
| */ |
| kDifLcCtrlStatusCodeSuccess, |
| /** |
| * Indicates that too many hardware transitions have occurred, and the |
| * hardware will not transition the lifecycle any further. |
| */ |
| kDifLcCtrlStatusCodeTooManyTransitions, |
| /** |
| * Indicates that an invalid lifecycle transition was attempted. |
| */ |
| kDifLcCtrlStatusCodeInvalidTransition, |
| /** |
| * Indicates that a bad token was supplied for conditional transition. |
| */ |
| kDifLcCtrlStatusCodeBadToken, |
| /** |
| * Indicates a flash RMA request error. |
| */ |
| kDifLcCtrlStatusCodeFlashRmaError, |
| /** |
| * Indicates an error during an OTP operation. |
| * |
| * This error will raise an alert. |
| */ |
| kDifLcCtrlStatusCodeOtpError, |
| /** |
| * Indicates an error in the controller's internal state. |
| * |
| * This error will raise an alert. |
| */ |
| kDifLcCtrlStatusCodeCorrupt, |
| /** |
| * Indicates a bus integrity error. |
| * |
| * This error will raise an alert. |
| */ |
| kDifLcCtrlStatusCodeBusIntegError, |
| /** |
| * Indicates an ECC error in the lifecycle OTP partition. |
| */ |
| kDifLcCtrlStatusCodeOtpPartError, |
| } dif_lc_ctrl_status_code_t; |
| |
| /** |
| * A bit-vector of `dif_lc_ctrl_status_code_t`s. |
| * |
| * Whether a particular status is contained in this vector can be discovered by |
| * using it as a bit index: `bitfield_bit32_read(status, status_code);`. |
| */ |
| typedef uint32_t dif_lc_ctrl_status_t; |
| |
| /** |
| * A lifecycle state. |
| * |
| * This enum represents all states that the lifecycle state register can be in; |
| * some of these do not correspond to "real" lifecycle states, and cannot be |
| * transitioned to. |
| */ |
| typedef enum dif_lc_ctrl_state { |
| /** |
| * The initial post-manufacture state. |
| * |
| * All functions are disabled. |
| */ |
| kDifLcCtrlStateRaw, |
| /** |
| * The zeroth test state. |
| * |
| * Debug functions are enabled. |
| */ |
| kDifLcCtrlStateTestUnlocked0, |
| /** |
| * The zeroth locked test state. |
| * |
| * All functions are disabled. |
| */ |
| kDifLcCtrlStateTestLocked0, |
| /** |
| * The first test state. |
| * |
| * Debug functions are enabled. |
| */ |
| kDifLcCtrlStateTestUnlocked1, |
| /** |
| * The first locked test state. |
| * |
| * All functions are disabled. |
| */ |
| kDifLcCtrlStateTestLocked1, |
| /** |
| * The second test state. |
| * |
| * Debug functions are enabled. |
| */ |
| kDifLcCtrlStateTestUnlocked2, |
| /** |
| * The second locked test state. |
| * |
| * All functions are disabled. |
| */ |
| kDifLcCtrlStateTestLocked2, |
| /** |
| * The third test state. |
| * |
| * Debug functions are enabled. |
| */ |
| kDifLcCtrlStateTestUnlocked3, |
| /** |
| * The third locked test state. |
| * |
| * All functions are disabled. |
| */ |
| kDifLcCtrlStateTestLocked3, |
| /** |
| * The fourth test state. |
| * |
| * Debug functions are enabled. |
| */ |
| kDifLcCtrlStateTestUnlocked4, |
| /** |
| * The fourth locked test state. |
| * |
| * All functions are disabled. |
| */ |
| kDifLcCtrlStateTestLocked4, |
| /** |
| * The fifth test state. |
| * |
| * Debug functions are enabled. |
| */ |
| kDifLcCtrlStateTestUnlocked5, |
| /** |
| * The fifth locked test state. |
| * |
| * All functions are disabled. |
| */ |
| kDifLcCtrlStateTestLocked5, |
| /** |
| * The sixth test state. |
| * |
| * Debug functions are enabled. |
| */ |
| kDifLcCtrlStateTestUnlocked6, |
| /** |
| * The sixth locked test state. |
| * |
| * All functions are disabled. |
| */ |
| kDifLcCtrlStateTestLocked6, |
| /** |
| * The seventh test state. |
| * |
| * Debug functions are enabled. |
| */ |
| kDifLcCtrlStateTestUnlocked7, |
| /** |
| * The development state. |
| * |
| * Some debug functions are enabled. |
| */ |
| kDifLcCtrlStateDev, |
| /** |
| * The main production state. |
| * |
| * No debug functions are enabled. |
| */ |
| kDifLcCtrlStateProd, |
| /** |
| * The EOL production state. |
| * |
| * Same as Prod, except Rma cannot be transitioned to. |
| */ |
| kDifLcCtrlStateProdEnd, |
| /** |
| * RMA manufacturer analysis state. |
| */ |
| kDifLcCtrlStateRma, |
| /** |
| * The scrap EOL state. |
| * |
| * Cannot be transitioned from; all functions are disabled. |
| */ |
| kDifLcCtrlStateScrap, |
| |
| /** |
| * State entered immediately after a transition occurs. |
| * |
| * Not a real state. |
| */ |
| kDifLcCtrlStatePostTransition, |
| /** |
| * State entered immediately after an alert is raised. |
| * |
| * Not a real state. |
| */ |
| kDifLcCtrlStateEscalate, |
| /** |
| * Indicates that the encoded lifecycle is invalid. |
| * |
| * Not a real state. |
| */ |
| kDifLcCtrlStateInvalid, |
| } dif_lc_ctrl_state_t; |
| |
| /** |
| * A personalization state, indicating whether the device has been successfully |
| * personalized. |
| */ |
| typedef enum dif_lc_ctrl_id_state { |
| /** |
| * Indicates that the device has not yet been personalized. |
| */ |
| kDifLcCtrlIdStateBlank, |
| /** |
| * Indicates that the device has been personalized. |
| */ |
| kDifLcCtrlIdStatePersonalized, |
| /** |
| * Indicates that the personalization state is corrupt. |
| */ |
| kDifLcCtrlIdStateInvalid, |
| } dif_lc_ctrl_id_state_t; |
| |
| /** |
| * A 128-bit unlock token used for certain kinds of lifecycle transitions. |
| */ |
| typedef struct dif_lc_ctrl_token { |
| uint8_t data[128 / 8]; |
| } dif_lc_ctrl_token_t; |
| |
| /** |
| * A 32-bit hardware revision number. |
| */ |
| typedef struct { |
| uint16_t chip_gen; |
| uint16_t chip_rev; |
| } dif_lc_ctrl_hw_rev_t; |
| |
| /** |
| * A 256-bit device id stored in OTP's hw_cfg partition. |
| */ |
| typedef struct dif_lc_ctrl_device_id { |
| uint32_t data[256 / 32]; |
| } dif_lc_ctrl_device_id_t; |
| |
| /** |
| * Returns the current state of the lifecycle controller. |
| * |
| * @param lc A lifecycle handle. |
| * @param[out] state Out-param for the controller's state. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_get_state(const dif_lc_ctrl_t *lc, |
| dif_lc_ctrl_state_t *state); |
| |
| /** |
| * Returns the number of lifecycle transitions that this device has attempted, |
| * up to 16. |
| * |
| * @param lc A lifecycle handle. |
| * @param[out] count Out-param for the number of attempts. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_get_attempts(const dif_lc_ctrl_t *lc, uint8_t *count); |
| |
| /** |
| * Returns the current status of the lifecycle controller. |
| * |
| * @param lc A lifecycle handle. |
| * @param[out] status Out-param for the controller's status. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_get_status(const dif_lc_ctrl_t *lc, |
| dif_lc_ctrl_status_t *status); |
| |
| /** |
| * Returns the current personalization state of the lifecycle controller. |
| * |
| * @param lc A lifecycle handle. |
| * @param[out] state Out-param for the controller's personalization state. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_get_id_state(const dif_lc_ctrl_t *lc, |
| dif_lc_ctrl_id_state_t *state); |
| |
| /** |
| * Returns the hardware revision number reading from lifecycle controller's |
| * hardware revision register. |
| * |
| * @param lc A lifecycle handle. |
| * @param[out] hw_rev Out-param for the hardware revision. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_get_hw_rev(const dif_lc_ctrl_t *lc, |
| dif_lc_ctrl_hw_rev_t *hw_rev); |
| |
| /** |
| * Returns the current device id reading from lifecycle controller's device id |
| * registers. |
| * |
| * @param lc A lifecycle handle. |
| * @param[out] device_id Out-param for the device id. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_get_device_id(const dif_lc_ctrl_t *lc, |
| dif_lc_ctrl_device_id_t *device_id); |
| |
| /** |
| * Attempts to acquire the lifecycle controller's HW mutex. |
| * |
| * Returns `kDifLcCtrlMutexHeld` if acquisition fails. It is recommended to |
| * call this function in a busy loop to acquire the mutex. |
| * |
| * @param lc A lifecycle handle. |
| * @return The result of the operation. |
| */ |
| // Open Q: do we want to be checking REGWEN for all operations dependent on the |
| // mutex? |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_mutex_try_acquire(const dif_lc_ctrl_t *lc); |
| |
| /** |
| * Releases the lifecycle controller's HW mutex. |
| * |
| * Calls to this function must be sequenced with successful calls to |
| * `dif_lc_ctrl_mutex_try_acquire()`. |
| * |
| * @param lc A lifecycle handle. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_mutex_release(const dif_lc_ctrl_t *lc); |
| |
| /** |
| * Configures the lifecycle controller to perform a transition. |
| * |
| * Note that not all transitions require an unlock token; in that case, NULL |
| * should be passed as the token. |
| * |
| * @param lc A lifecycle handle. |
| * @param state The state to transition to. |
| * @param use_ext_clock Whether to use the external clock for the transition. |
| * @param token A token for unlocking the transition; may be null. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_configure(const dif_lc_ctrl_t *lc, |
| dif_lc_ctrl_state_t target_state, |
| bool use_ext_clock, |
| const dif_lc_ctrl_token_t *token); |
| |
| /** |
| * Performs a lifecycle transition. |
| * |
| * @param lc A lifecycle handle. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_transition(const dif_lc_ctrl_t *lc); |
| |
| /** |
| * Writes settings to the vendor-specific OTP test control register. |
| * |
| * This returns `kDifUnavailable` if the mutex has not been acquired. |
| * |
| * @param lc A lifecycle handle. |
| * @param settings The settings to write to the register. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_set_otp_vendor_test_reg(const dif_lc_ctrl_t *lc, |
| uint32_t settings); |
| |
| /** |
| * Reads settings from the vendor-specific OTP test control register. |
| * |
| * This returns `kDifUnavailable` if the mutex has not been acquired. |
| * |
| * @param lc A lifecycle handle. |
| * @param settings Output parameter for the settings. |
| * @return The result of the operation. |
| */ |
| OT_WARN_UNUSED_RESULT |
| dif_result_t dif_lc_ctrl_get_otp_vendor_test_reg(const dif_lc_ctrl_t *lc, |
| uint32_t *settings); |
| |
| #ifdef __cplusplus |
| } // extern "C" |
| #endif // __cplusplus |
| |
| #endif // OPENTITAN_SW_DEVICE_LIB_DIF_DIF_LC_CTRL_H_ |