hw/ip/adc_ctrl/data/adc_ctrl_testplan.hjson

// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{
  name: "adc_ctrl"
  // TODO: remove the common testplans if not applicable
  import_testplans: ["hw/dv/tools/dvsim/testplans/csr_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/alert_test_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/intr_test_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/tl_device_access_types_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/stress_all_with_reset_testplan.hjson"]
  testpoints: [
    {
      name: smoke
      desc: '''
            Verify datapath between AST ADC interface and ADC sample registers.

            **Stimulus**:

            For a number of iterations:
            - Configure DUT no filters or events.
            - Generate ADC data.
            - Sample into capture registers using oneshot mode.

            **Checks:**

            - From monitored ADC data predict the value of the ADC sample register
            - Compare sample registers against expected.
            - Check oneshot bit of interrupt status register works as expected.
            '''
      milestone: V1
      tests: ["adc_ctrl_smoke"]
    }
    {
      name: filters_polled
      desc: '''
          Verify filter functionality by polling filter status register.

          **Stimulus**:

          For a number of iterations:
          - Configure DUT with randomized filter parameters, filters enabled
          but no interrupts or wake events.
          - Generate ADC data stream.

          **Checks**:

          - From monitored ADC data predict when filters should be triggered.
          - Confirm this by reading the filter status register.
          - Ensure that only one ADC channel is selected at a time.
          '''
      milestone: V2
      tests: []
    }
    {
      name: filters_polled_fixed
      desc: '''
          As filters_polled but with filter parameters fixed during the test.
          '''
      milestone: V2
      tests: []
    }
    {
      name: filters_interrupt
      desc: '''
          Verify filter interrupt functionality.

          **Stimulus**:

          For a number of iterations:
          - Configure DUT with randomized filter parameters, filters and interrupts enabled.
          - Generate ADC data stream.


          **Checks**:

          - From monitored ADC data predict when filters should be triggered.
          - Confirm this by reading the filter status register and interrupt status register.
          - Confirm correct interrupt sample value has been captured in ADC sample registers(s)
          - Check interrupt signal operates as expected.
          '''
      milestone: V2
      tests: []
    }
    {
      name: filters_interrupt_fixed
      desc: '''
          As filters_interrupt but with filter parameters fixed during the test.
          '''
      milestone: V2
      tests: []
    }
    {
      name: filters_wakeup
      desc: '''
          Verify filter wakeup functionality

          **Stimulus**:
          For a number of iterations:
          - Configure DUT with randomized filter parameters,
          filters and wakeup enabled, low power sampling mode.
          - Generate ADC data stream.

          **Checks**:

          - From monitored ADC data predict when filters should be triggered.
          - Confirm this by reading the filter status register.
          - Check wakeup signal operates as expected.
          '''
      milestone: V2
      tests: []
    }
    {
      name: filters_wakeup_fixed
      desc: '''
          As filters_wakeup but with filter parameters fixed during the test.
          '''
      milestone: V2
      tests: []
    }
    {
      name: clock_gating
      desc: '''
          Verify filter wakeup and interrupts function correctly when fast clock is
          turned off as would occur in the system.

          **Stimulus**:

          For a number of iterations:
          - Configure DUT with randomized filter parameters, filters,
          interrupt and wakeup enabled, low power sampling mode.
          - Turn off fast clock.
          - Generate ADC data stream.
          - When wakeup occurs after a further random period turn fast clock back on.

          **Checks**:

          - From monitored ADC data predict when filters should be triggered.
          - Confirm this by reading the filter status register and interrupt status register.
          - Check wakeup signal operates as expected.
          - Check interrupt signal operates as expected.
          '''
      milestone: V2
      tests: []
    }
    {
      name: poweron_counter
      desc: '''
          Verify ADC power on counter

          **Stimulus**:

          For a number of iterations:
          - Configure DUT with a random ADC power on count.
          - Enable ADC.
          - Generate ADC data stream.

          **Checks**:

          - Confirm timing of power down and channel select signals to ADC.
          '''
      milestone: V2
      tests: []
    }
    {
      name: lowpower_counter
      desc: '''
          Verify ADC low power counter

          **Stimulus**:

          For a number of iterations:
          - Configure DUT with a random low power sample count.
          - Enable ADC in low power mode.
          - Generate ADC data stream.

          **Checks**:

          - Confirm return to fast sampling happens as expected.
        '''
      milestone: V2
      tests: []
    }
    {
      name: fsm_reset
      desc: '''
          Verify ADC controller FSM software reset

          **Stimulus**:

          For a number of iterations:
          - Configure DUT with a random low power sample count.
          - Enable ADC randomly in low or high power mode.
          - Generate ADC data stream.
          - Trigger a software reset by writing to adc_fsm_rst register.

          **Checks**:

          - Ensure ADC controller FSM and counters are reset.
        '''
      milestone: V2
      tests: []
    }

    {
      name: stress_all
      desc: '''
            Combine above sequences in one test then randomly select for running

            Stimulus:
              - Start sequences and randomly add reset between each sequence

            Checking:
              - All sequences should be finished and checked by the scoreboard
      '''
      milestone: V2
      tests: ["adc_ctrl_stress_all"]
    }

  ]

  covergroups: [
    {
      name: adc_ctrl_power_mode_cg
      desc: '''
        Cover power mode configuration
      '''
    }
    {
      name: adc_ctrl_filter_cg
      desc: '''
        Cover filter configuration (one instance per filter)
      '''
    }
    {
      name: adc_ctrl_fsm_reset_cg
      desc: '''
        Cover FSM state and counter values when fsm_reset is triggered
      '''
    }
    {
      name: adc_ctrl_hw_reset_cg
      desc: '''
        Cover FSM state and counter values when hardware reset is asserted
      '''
    }
  ]
}