|  | // Copyright lowRISC contributors. | 
|  | // Licensed under the Apache License, Version 2.0, see LICENSE for details. | 
|  | // SPDX-License-Identifier: Apache-2.0 | 
|  |  | 
|  | #include <stddef.h> | 
|  |  | 
|  | #include "sw/device/lib/arch/device.h" | 
|  | #include "sw/device/lib/dif/dif_uart.h" | 
|  | #include "sw/device/lib/runtime/print.h" | 
|  | #include "sw/device/lib/testing/check.h" | 
|  | #include "sw/device/lib/testing/test_framework/test_status.h" | 
|  |  | 
|  | #include "hw/top_earlgrey/sw/autogen/top_earlgrey.h" | 
|  |  | 
|  | // These symbopls are provided by the riscv-compliance libraries. | 
|  | extern void run_rvc_test(void); | 
|  | extern volatile uint32_t begin_signature[]; | 
|  | extern volatile uint32_t end_signature[]; | 
|  |  | 
|  | static dif_uart_t uart0; | 
|  |  | 
|  | int opentitan_compliance_main(int argc, char **argv) { | 
|  | CHECK_DIF_OK(dif_uart_init( | 
|  | mmio_region_from_addr(TOP_EARLGREY_UART0_BASE_ADDR), &uart0)); | 
|  | CHECK_DIF_OK( | 
|  | dif_uart_configure(&uart0, (dif_uart_config_t){ | 
|  | .baudrate = kUartBaudrate, | 
|  | .clk_freq_hz = kClockFreqPeripheralHz, | 
|  | .parity_enable = kDifToggleDisabled, | 
|  | .parity = kDifUartParityEven, | 
|  | })); | 
|  | base_uart_stdout(&uart0); | 
|  |  | 
|  | run_rvc_test(); | 
|  |  | 
|  | ptrdiff_t size = end_signature - begin_signature; | 
|  | for (int i = 0; i < size; ++i) { | 
|  | base_printf("SIG: %08x\r\n", begin_signature[i]); | 
|  | } | 
|  |  | 
|  | // Above values are checked for correctness externally post-simulation. | 
|  | test_status_set(kTestStatusPassed); | 
|  |  | 
|  | // Unreachable code. | 
|  | return 0; | 
|  | } |