hw/ip/rv_dm/lint/rv_dm.waiver - 3p/lowrisc/opentitan - Git at Google

 # Copyright lowRISC contributors.
 # Licensed under the Apache License, Version 2.0, see LICENSE for details.
 # SPDX-License-Identifier: Apache-2.0
 #
 # waiver file for rv_dm lint

 # rv_dm
 waive -rules HIER_NET_NOT_READ -location {rv_dm.sv} -regexp {Net 'hartsel\[19:1\]' in module 'rv_dm'} \
       -comment "These bits are not used since the system has only one hart."
 waive -rules IFDEF_CODE -location {rv_dm.sv} -regexp {DMIDirectTAP} \
       -comment "That's fine."
 waive -rules CLOCK_MUX  -location {rv_dm.sv} \
       -regexp {Clock 'tck_muxed' is driven by a multiplexer here, used as a clock} \
       -comment "The signal is coming out of a prim_clock_mux2 block."
 waive -rules CLOCK_USE -location {rv_dm.sv} \
       -msg {'clk_i' is connected to 'prim_clock_mux2' port 'clk1_i',} \
       -comment "This is needed such that the clock can be properly controlled during scanmode."
 waive -rules CLOCK_USE -location {rv_dm.sv} \
       -msg {'clk_i' is connected to 'prim_clock_mux2' port 'clk1_i',} \
       -comment "This clock usage is OK and is due to hand instantiated primitives on the clock line."

 # dmi_jtag_tap
 waive -rules CLOCK_MUX -location {dmi_jtag_tap.sv} -regexp {Clock 'tck_n' is driven by a multiplexer here, used as a clock at dmi_jtag_tap.sv} \
       -comment "This is permissible for now, but should be revised as soon as ASIC targets come into play."
 waive -rules INV_CLOCK -location {dmi_jtag_tap.sv} -regexp {'tck_i' is inverted, used as clock at dmi_jtag_tap.sv} \
       -comment "This is permissible for now, but should be revised as soon as ASIC targets come into play."
 waive -rules CLOCK_DRIVER -location {dmi_jtag_tap.sv} -msg {'tck_n' is driven by instance 'i_tck_inv' of module 'prim_clock_inv'} \
       -comment "This is due to clocking primitives on the clock line."
 waive -rules CLOCK_DRIVER -location {dmi_jtag_tap.sv} -msg {'clk_no' driven in module 'prim_clock_inv' by port 'gen_*.clk_no' at prim_clock_inv.} \
       -comment "This is due to clocking primitives on the clock line."
 waive -rules CLOCK_DRIVER -location {dmi_jtag_tap.sv} -regexp {'clk_no' driven in module .* by port 'gen_scan.u_size_only_mux2.X' at.*} \
       -comment "This is due to clocking primitives on the clock line."
 waive -rules CLOCK_DRIVER -location {dmi_jtag_tap.sv} -msg {'X' driven in module 'SEN_MUXI2_S_4' at} \
       -comment "This is permissible for now as it appears to be related to how lint translates the LIB - but it should be reviewed before tapeout."
 waive -rules CLOCK_USE -location {dmi_jtag_tap.sv} -msg {'tck_i' is connected to 'prim_clock_inv' port 'clk_i', and used as a clock at dmi_jtag_tap} \
       -comment "This is a clock inverter in the design."


 # dm_csrs
 waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'dmcontrol_q.*' is driven by constant zero} \
       -comment "Parts of this struct are constantly set to zero."
 waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'abstractauto_q.*' is driven by constant zero.} \
       -comment "Parts of this struct are constantly set to zero."
 waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'sbcs_q.sbaccess(8|16|64|128|\[17\]|\[19\])' is driven by constant zero} \
       -comment "Parts of this struct are constantly set to zero."
       waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'sbcs_q.sbasize\[(9:5|11)\]' is driven by constant zero} \
       -comment "Parts of this struct are constantly set to zero."
       waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'sbcs_q.sbversion\[31:30\]' is driven by constant zero.} \
       -comment "Parts of this struct are constantly set to zero."
 waive -rules CASE_SEL_EXPR -location {dm_csrs.sv} -regexp {Expression 'dm::dm_csr_e.*as case selector} \
       -comment "acceptable use"
 waive -rules NOT_READ -location {dm_csrs.sv} -regexp {Signal 'a_abstractcs.(busy|datacount|progbufsize|zero[0-3])' is not read from} \
       -comment "These signals are not needed by dm_csrs module"
 waive -rules ARITH_CONTEXT -location {dm_csrs.sv} \
       -regexp {Bitlength of arithmetic operation '{dm_csr_addr} - {dm::Data0}' is self-determined in this context} \
       -comment "Values from the same enum can safely be subtracted."


 # dm_mem
 waive -rules INPUT_NOT_READ -location {dm_mem.sv} -regexp {Input port 'hartsel_i\[19:1\]' is not read from.*} \
       -comment "These bits are not used since the system has only one hart."
 waive -rules ARITH_CONTEXT -location {dm_mem.sv} -regexp {Bitlength.*DbgAddressBits.*self-determined} \
       -comment "should be no concern about loss of bit accuracy"
 waive -rules ONE_BRANCH    -location {dm_mem.sv} -regexp {unique case statement has only one branch} \
       -comment "easier to write this way for extendability"
 waive -rules NOT_READ -location {dm_mem.sv} -regexp {Signal 'ac_ar.(regno.13.|zero1)' is not read from in module 'dm_mem'} \
       -comment "These bits and fields are not used, but all other bits and fields are used"

 # dm_sba
 waive -rules HIER_BRANCH_NOT_READ  -location {dm_sba.sv}            -regexp {Net 'dmactive_i' is not read from in module 'dm_sba'} \
       -comment "This signal is only used in an assertion"
 waive -rules INPUT_NOT_READ        -location {dm_sba.sv}            -regexp {Input port 'dmactive_i' is not read from in module 'dm_sba'} \
       -comment "This input is only used by an assertion"

 # dm_pkg
 waive -rules INPUT_NOT_READ -location {dm_pkg.sv} -regexp {Input port 'imm.0.' is not read from in function '(jal|auipc)'} \
       -comment "These functions use all bits of input imm, except for bit 0"

 # debug_rom and dm_mem
 waive -rules INPUT_NOT_READ -location {debug_rom.sv} -regexp {Input port 'addr_i.(2:0|63:8).' is not read from in module 'debug_rom'} \
       -comment "These bits are not used, but the remaining address bits are used"
 waive -rules HIER_NET_NOT_READ -location {dm_mem.sv} -regexp {Connected net 'addr_i.(2:0|31:8).' at debug_rom.sv} \
       -comment "These bits are not used, but the remaining address bits are used"

 # dmi_jtag
 waive -rules HIER_NET_NOT_READ -location {dmi_jtag.sv} -regexp {Net 'dmi_resp.resp' is not read from in module 'dmi_jtag'} \
       -comment "This part of the struct is not read from within this module."
 waive -rules NOT_READ -location {dmi_jtag.sv} -regexp {Signal 'dmi_resp.resp' is not read from in module 'dmi_jtag'} \
       -comment "This part of the struct is not read from within this module."
	# Copyright lowRISC contributors.
	# Licensed under the Apache License, Version 2.0, see LICENSE for details.
	# SPDX-License-Identifier: Apache-2.0
	#
	# waiver file for rv_dm lint

	# rv_dm
	waive -rules HIER_NET_NOT_READ -location {rv_dm.sv} -regexp {Net 'hartsel\[19:1\]' in module 'rv_dm'} \
	-comment "These bits are not used since the system has only one hart."
	waive -rules IFDEF_CODE -location {rv_dm.sv} -regexp {DMIDirectTAP} \
	-comment "That's fine."
	waive -rules CLOCK_MUX -location {rv_dm.sv} \
	-regexp {Clock 'tck_muxed' is driven by a multiplexer here, used as a clock} \
	-comment "The signal is coming out of a prim_clock_mux2 block."
	waive -rules CLOCK_USE -location {rv_dm.sv} \
	-msg {'clk_i' is connected to 'prim_clock_mux2' port 'clk1_i',} \
	-comment "This is needed such that the clock can be properly controlled during scanmode."
	waive -rules CLOCK_USE -location {rv_dm.sv} \
	-msg {'clk_i' is connected to 'prim_clock_mux2' port 'clk1_i',} \
	-comment "This clock usage is OK and is due to hand instantiated primitives on the clock line."

	# dmi_jtag_tap
	waive -rules CLOCK_MUX -location {dmi_jtag_tap.sv} -regexp {Clock 'tck_n' is driven by a multiplexer here, used as a clock at dmi_jtag_tap.sv} \
	-comment "This is permissible for now, but should be revised as soon as ASIC targets come into play."
	waive -rules INV_CLOCK -location {dmi_jtag_tap.sv} -regexp {'tck_i' is inverted, used as clock at dmi_jtag_tap.sv} \
	-comment "This is permissible for now, but should be revised as soon as ASIC targets come into play."
	waive -rules CLOCK_DRIVER -location {dmi_jtag_tap.sv} -msg {'tck_n' is driven by instance 'i_tck_inv' of module 'prim_clock_inv'} \
	-comment "This is due to clocking primitives on the clock line."
	waive -rules CLOCK_DRIVER -location {dmi_jtag_tap.sv} -msg {'clk_no' driven in module 'prim_clock_inv' by port 'gen_*.clk_no' at prim_clock_inv.} \
	-comment "This is due to clocking primitives on the clock line."
	waive -rules CLOCK_DRIVER -location {dmi_jtag_tap.sv} -regexp {'clk_no' driven in module .* by port 'gen_scan.u_size_only_mux2.X' at.*} \
	-comment "This is due to clocking primitives on the clock line."
	waive -rules CLOCK_DRIVER -location {dmi_jtag_tap.sv} -msg {'X' driven in module 'SEN_MUXI2_S_4' at} \
	-comment "This is permissible for now as it appears to be related to how lint translates the LIB - but it should be reviewed before tapeout."
	waive -rules CLOCK_USE -location {dmi_jtag_tap.sv} -msg {'tck_i' is connected to 'prim_clock_inv' port 'clk_i', and used as a clock at dmi_jtag_tap} \
	-comment "This is a clock inverter in the design."


	# dm_csrs
	waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'dmcontrol_q.*' is driven by constant zero} \
	-comment "Parts of this struct are constantly set to zero."
	waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'abstractauto_q.*' is driven by constant zero.} \
	-comment "Parts of this struct are constantly set to zero."
	waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'sbcs_q.sbaccess(8\|16\|64\|128\|\[17\]\|\[19\])' is driven by constant zero} \
	-comment "Parts of this struct are constantly set to zero."
	waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'sbcs_q.sbasize\[(9:5\|11)\]' is driven by constant zero} \
	-comment "Parts of this struct are constantly set to zero."
	waive -rules CONST_FF -location {dm_csrs.sv} -regexp {Flip-flop 'sbcs_q.sbversion\[31:30\]' is driven by constant zero.} \
	-comment "Parts of this struct are constantly set to zero."
	waive -rules CASE_SEL_EXPR -location {dm_csrs.sv} -regexp {Expression 'dm::dm_csr_e.*as case selector} \
	-comment "acceptable use"
	waive -rules NOT_READ -location {dm_csrs.sv} -regexp {Signal 'a_abstractcs.(busy\|datacount\|progbufsize\|zero[0-3])' is not read from} \
	-comment "These signals are not needed by dm_csrs module"
	waive -rules ARITH_CONTEXT -location {dm_csrs.sv} \
	-regexp {Bitlength of arithmetic operation '{dm_csr_addr} - {dm::Data0}' is self-determined in this context} \
	-comment "Values from the same enum can safely be subtracted."


	# dm_mem
	waive -rules INPUT_NOT_READ -location {dm_mem.sv} -regexp {Input port 'hartsel_i\[19:1\]' is not read from.*} \
	-comment "These bits are not used since the system has only one hart."
	waive -rules ARITH_CONTEXT -location {dm_mem.sv} -regexp {Bitlength.DbgAddressBits.self-determined} \
	-comment "should be no concern about loss of bit accuracy"
	waive -rules ONE_BRANCH -location {dm_mem.sv} -regexp {unique case statement has only one branch} \
	-comment "easier to write this way for extendability"
	waive -rules NOT_READ -location {dm_mem.sv} -regexp {Signal 'ac_ar.(regno.13.\|zero1)' is not read from in module 'dm_mem'} \
	-comment "These bits and fields are not used, but all other bits and fields are used"

	# dm_sba
	waive -rules HIER_BRANCH_NOT_READ -location {dm_sba.sv} -regexp {Net 'dmactive_i' is not read from in module 'dm_sba'} \
	-comment "This signal is only used in an assertion"
	waive -rules INPUT_NOT_READ -location {dm_sba.sv} -regexp {Input port 'dmactive_i' is not read from in module 'dm_sba'} \
	-comment "This input is only used by an assertion"

	# dm_pkg
	waive -rules INPUT_NOT_READ -location {dm_pkg.sv} -regexp {Input port 'imm.0.' is not read from in function '(jal\|auipc)'} \
	-comment "These functions use all bits of input imm, except for bit 0"

	# debug_rom and dm_mem
	waive -rules INPUT_NOT_READ -location {debug_rom.sv} -regexp {Input port 'addr_i.(2:0\|63:8).' is not read from in module 'debug_rom'} \
	-comment "These bits are not used, but the remaining address bits are used"
	waive -rules HIER_NET_NOT_READ -location {dm_mem.sv} -regexp {Connected net 'addr_i.(2:0\|31:8).' at debug_rom.sv} \
	-comment "These bits are not used, but the remaining address bits are used"

	# dmi_jtag
	waive -rules HIER_NET_NOT_READ -location {dmi_jtag.sv} -regexp {Net 'dmi_resp.resp' is not read from in module 'dmi_jtag'} \
	-comment "This part of the struct is not read from within this module."
	waive -rules NOT_READ -location {dmi_jtag.sv} -regexp {Signal 'dmi_resp.resp' is not read from in module 'dmi_jtag'} \
	-comment "This part of the struct is not read from within this module."