| #!/usr/bin/env python3 |
| # Copyright lowRISC contributors. |
| # Licensed under the Apache License, Version 2.0, see LICENSE for details. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| import os |
| import random |
| import re |
| import subprocess |
| import sys |
| import tempfile |
| from typing import BinaryIO, IO, List, Optional, TextIO, Tuple |
| |
| from elftools.elf.elffile import ELFFile # type: ignore |
| |
| |
| _REPO_ROOT = os.path.join(os.path.dirname(__file__), '../../../..') |
| _UTIL_DESIGN = os.path.normpath(os.path.join(_REPO_ROOT, 'util/design')) |
| old_sys_path = sys.path |
| try: |
| sys.path = sys.path + [_UTIL_DESIGN] |
| import secded_gen # type: ignore |
| finally: |
| sys.path = old_sys_path |
| |
| |
| def red_xor32(word: int) -> int: |
| '''Reduction XOR for a uint32''' |
| word = (word & 0xffff) ^ (word >> 16) |
| word = (word & 0xff) ^ (word >> 8) |
| word = (word & 0xf) ^ (word >> 4) |
| word = (word & 0x3) ^ (word >> 2) |
| return (word & 0x1) ^ (word >> 1) |
| |
| |
| def add_ecc32(word: int, bitmasks: List[int]) -> int: |
| '''Add Hsiao (39,32) ECC bits to a 32-bit unsigned word''' |
| assert 0 <= word < (1 << 32) |
| assert len(bitmasks) == 7 |
| ret = word |
| for idx, bitmask in enumerate(bitmasks): |
| ret |= red_xor32(word ^ bitmask) << (32 + idx) |
| return ret |
| |
| |
| class MemChunk: |
| def __init__(self, base_addr: int, words: List[int]): |
| '''A contiguous list of words starting at base_addr''' |
| self.base_addr = base_addr |
| self.words = words |
| |
| def __str__(self) -> str: |
| return ('MemChunk(@{:#x}, words_len={})' |
| .format(self.base_addr, len(self.words))) |
| |
| def next_addr(self) -> int: |
| '''Get the address directly above the chunk''' |
| return self.base_addr + len(self.words) |
| |
| def write_vmem(self, width: int, outfile: TextIO) -> None: |
| '''Write this chunk as one or more lines to outfile |
| |
| width is the maximum width of a word in bits. |
| |
| ''' |
| addr_chars = max(8, (self.next_addr().bit_length() + 3) // 4) |
| word_chars = (width + 3) // 4 |
| |
| # Try to wrap at 79 characters. To do this, pick a number of words so |
| # that addr_chars + num_words * (word_chars + 1) fits (note that we |
| # gain a character by adding a @ on the front of the address, but lose |
| # it again by omitting the trailing space after the last word). |
| nwords_on_line = max(1, (79 - addr_chars) // (1 + word_chars)) |
| for start_idx in range(0, len(self.words), nwords_on_line): |
| line_addr = self.base_addr + start_idx |
| toks = [f'@{line_addr:0{addr_chars}X}'] |
| for word in self.words[start_idx:start_idx + nwords_on_line]: |
| toks.append(f'{word:0{word_chars}X}') |
| outfile.write(' '.join(toks) + '\n') |
| |
| def add_ecc32(self) -> None: |
| '''Add ECC32 integrity bits |
| |
| This extends the input words (which are assumed to be 32-bit) by 7 |
| bits, to make 39-bit words. |
| |
| ''' |
| codes = secded_gen.gen_code('hsiao', 32, 7) |
| bitmasks = secded_gen.calc_bitmasks(32, 7, codes, False) |
| self.words = [add_ecc32(w, bitmasks) for w in self.words] |
| |
| |
| class MemFile: |
| def __init__(self, width: int, chunks: List[MemChunk]): |
| self.width = width |
| self.chunks = chunks |
| |
| def __str__(self) -> str: |
| return ('MemFile(width={}, chunks_len={})' |
| .format(self.width, len(self.chunks))) |
| |
| @staticmethod |
| def _parse_line(width: int, line: str) -> Tuple[int, List[int]]: |
| '''Parse a line from a preprocessed vmem file |
| |
| Returns a pair (addr, words) where addr is the address at the start of |
| the line and words is a list of the words that have been found, parsed |
| to unsigned numbers. Assumes that line has at least one non-whitespace |
| character. Each word is checked to make sure that it fits in width |
| bits. |
| |
| ''' |
| tokens = line.split() |
| assert tokens |
| |
| addr_match = re.match(r'@([0-9a-fA-F]+)$', tokens[0]) |
| if addr_match is None: |
| raise ValueError('Bad line format: first token is {!r}, ' |
| 'which is not in the right format for an address.' |
| .format(tokens[0])) |
| addr = int(addr_match.group(1), 16) |
| |
| words = [] |
| for idx, word_tok in enumerate(tokens[1:]): |
| try: |
| word = int(word_tok, 16) |
| except ValueError: |
| raise ValueError('Word {} of the line is invalid: ' |
| '{!r} is not a hex number.' |
| .format(idx + 1, word_tok)) from None |
| |
| if word < 0 or word >> width: |
| raise ValueError('Word {} of the line is {!r}, which ' |
| 'does not fit in an unsigned {}-bit number.' |
| .format(idx + 1, word_tok, width)) |
| words.append(word) |
| |
| return (addr, words) |
| |
| @staticmethod |
| def _load_preproc(width: int, infile: IO[str]) -> 'MemFile': |
| '''Load a pre-processed file''' |
| chunks = [] |
| next_chunk = None # type: Optional[MemChunk] |
| for line in infile: |
| # If the line is empty or whitespace, skip it. |
| if not line or line.isspace(): |
| continue |
| |
| line_addr, line_words = MemFile._parse_line(width, line) |
| |
| # If there aren't actually any words on the line, skip it. |
| if not line_words: |
| continue |
| |
| if next_chunk is None: |
| next_chunk = MemChunk(line_addr, line_words) |
| continue |
| |
| # Glue the line onto the current chunk if there's no gap |
| chunk_end = next_chunk.next_addr() |
| if line_addr < chunk_end: |
| raise ValueError("Cannot read data starting at {:#x}: " |
| "we're already at {:#x}, so this would " |
| "go backwards." |
| .format(line_addr, chunk_end)) |
| if line_addr == chunk_end: |
| next_chunk.words += line_words |
| continue |
| |
| # If we're here, there's a gap between the current chunk and |
| # line_addr. |
| chunks.append(next_chunk) |
| next_chunk = MemChunk(line_addr, line_words) |
| |
| if next_chunk is not None: |
| chunks.append(next_chunk) |
| |
| return MemFile(width, chunks) |
| |
| @staticmethod |
| def load_vmem(width: int, infile: TextIO) -> 'MemFile': |
| '''Read a VMEM file |
| |
| This assumes that all words fit in the given width. |
| |
| ''' |
| with tempfile.TemporaryFile('w+') as tmp: |
| # First, run cpp as a subprocess to strip out any comments. These |
| # are allowed by the vmem format as described in srec_vmem(5) and |
| # tokenising them is hard: get the C preprocessor to do the work |
| # for us! The -P argument tells cpp not to generate linemarkers |
| subprocess.run(['cpp', '-P'], stdin=infile, stdout=tmp, check=True) |
| tmp.seek(0) |
| return MemFile._load_preproc(width, tmp) |
| |
| @staticmethod |
| def load_elf32(infile: BinaryIO, base_addr: int) -> 'MemFile': |
| '''Read a little-endian 32-bit ELF file''' |
| elf_file = ELFFile(infile) |
| segments = [] # type: List[Tuple[int, int, bytes]] |
| for segment in elf_file.iter_segments(): |
| seg_type = segment['p_type'] |
| |
| # We're only interested in nonempty PT_LOAD segments |
| if seg_type != 'PT_LOAD' or segment['p_memsz'] == 0: |
| continue |
| |
| # seg_lma is the (relative) address of the first byte to be loaded. |
| # seg_top is the address of the last byte to be loaded. A one-byte |
| # segment will have seg_lma == seg_top. |
| seg_lma = segment['p_paddr'] - base_addr |
| seg_top = seg_lma + segment['p_memsz'] - 1 |
| |
| assert seg_lma <= seg_top |
| |
| # We re-map the addresses relative to base_addr: check that no |
| # segment starts before it. |
| if seg_lma < 0: |
| raise ValueError('ELF file contains a segment starting at ' |
| '{:#x}, so cannot be loaded relative to base ' |
| 'address {:#x}.' |
| .format(base_addr + seg_lma, base_addr)) |
| |
| segments.append((seg_lma, seg_top, segment.data())) |
| |
| # Sort the segments by base address |
| segments.sort(key=lambda t: t[0]) |
| |
| # Make sure that they don't overlap |
| prev_lma = 0 |
| next_addr = 0 |
| for lma, top, data in segments: |
| if lma < next_addr: |
| raise ValueError('ELF file contains overlapping segments with ' |
| 'address ranges {:#x}..{:#x} and ' |
| '{:#x}..{:#x}.' |
| .format(base_addr + prev_lma, |
| base_addr + next_addr - 1, |
| base_addr + lma, |
| base_addr + top)) |
| prev_lma = lma |
| next_addr = top + 1 |
| |
| # Merge any adjacent segments, bridging any sub-word gaps. This doesn't |
| # do any other right padding: we'll do that on the final pass that |
| # converts to 32-bit words. |
| merged_segments = [] # type: List[Tuple[int, int, bytes]] |
| next_word = 0 |
| for lma, top, data in segments: |
| # Round the LMA down to the previous word boundary. The non-overlap |
| # check above should ensure that this is never actually less than |
| # next_word. |
| lma_word = lma // 4 |
| assert next_word <= lma_word |
| |
| # If there isn't an aligned whole word between the two segments, |
| # bridge the gap |
| if merged_segments and next_word == lma_word: |
| last_lma_word, last_top, last_data = merged_segments[-1] |
| if last_top < lma: |
| # The largest gap possible here happens with addresses like |
| # last_top = 0x100; lma = 0x107, which just bridges two |
| # 4-byte words (0x100..0x103 and 0x104..0x107) with one |
| # byte used from each, leaving 6 bytes to fill. |
| assert lma - (last_top + 1) <= 6 |
| last_data += bytes(lma - (last_top + 1)) |
| merged_segments[-1] = (last_lma_word, top, last_data + data) |
| else: |
| # Pad on the left if necessary to ensure that lma is 32-bit |
| # aligned. |
| if lma % 4: |
| merged_segments.append((lma_word, top, bytes(lma % 4) + data)) |
| else: |
| merged_segments.append((lma_word, top, data)) |
| |
| # The index of the first word that starts strictly above top. |
| next_word = 1 + (top // 4) |
| |
| # Assemble the bytes in each segment into little-endian 32-bit words. |
| # Zero-extend any partial word at the end of a segment. Because of the |
| # merging in the previous pass, we know this won't cause any overlaps. |
| chunks = [] # type: List[MemChunk] |
| for lma_word, _, data in merged_segments: |
| words = [] |
| word = 0 |
| for idx, byte in enumerate(data): |
| shift = 8 * (idx % 4) |
| word |= byte << shift |
| if idx % 4 == 3: |
| words.append(word) |
| word = 0 |
| # idx here will be the index of the last byte. If data ended with a |
| # partial word, idx will be something other than 3 mod 4. |
| if idx % 4 != 3: |
| words.append(word) |
| |
| chunks.append(MemChunk(lma_word, words)) |
| |
| return MemFile(32, chunks) |
| |
| def next_addr(self) -> int: |
| '''Get the address directly above the top of the MemFile''' |
| return 0 if not self.chunks else self.chunks[-1].next_addr() |
| |
| def write_vmem(self, outfile: TextIO) -> None: |
| '''Write data to a VMEM file''' |
| for chunk in self.chunks: |
| chunk.write_vmem(self.width, outfile) |
| |
| def flatten(self, size: int, rnd_seed: int) -> 'MemFile': |
| '''Flatten into a single chunk, padding with pseudo-random data |
| |
| As well as padding between the chunks, this expands the result up to |
| size words by adding padding after the last chunk if necessary. |
| |
| ''' |
| assert self.next_addr() <= size |
| |
| old_rnd_state = random.getstate() |
| random.seed(rnd_seed) |
| |
| try: |
| acc = MemChunk(0, []) |
| # Add each chunk |
| for chunk in self.chunks: |
| acc_end = acc.next_addr() |
| assert acc_end <= chunk.base_addr |
| |
| # If there's a gap before the chunk, insert some random bits |
| padding_len = chunk.base_addr - acc_end |
| if padding_len: |
| acc.words += [random.getrandbits(32) |
| for _ in range(padding_len)] |
| |
| assert acc.next_addr() == chunk.base_addr |
| acc.words += chunk.words |
| |
| acc_end = acc.next_addr() |
| assert acc_end == self.next_addr() |
| |
| # If there's a gap after the last chunk, insert some more random |
| # bits |
| padding_len = size - acc_end |
| if padding_len: |
| acc.words += [random.getrandbits(32) |
| for _ in range(padding_len)] |
| |
| assert acc.next_addr() == size |
| |
| return MemFile(self.width, [acc]) |
| finally: |
| random.setstate(old_rnd_state) |
| |
| def add_ecc32(self) -> None: |
| '''Add ECC32 integrity bits |
| |
| This extends the input words (which are assumed to be 32-bit) by 7 |
| bits, to make 39-bit words. |
| |
| ''' |
| assert self.width <= 32 |
| for chunk in self.chunks: |
| chunk.add_ecc32() |
| self.width = 39 |
