hw/ip/alert_handler/data/alert_handler_testplan.hjson

// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{
  name: "alert_handler"
  import_testplans: ["hw/dv/tools/dvsim/testplans/csr_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/intr_test_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/enable_reg_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/stress_all_with_reset_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/tl_device_access_types_testplan.hjson"]
  testpoints: [
    {
      name: smoke
      desc: '''
            - Alert_handler smoke test with one class configured that escalates through all
              phases after one alert has been triggered
            - Check interrupt pins, alert cause CSR values, escalation pings, and crashdump_o
              output values
            - Support both synchronous and asynchronous settings'''
      milestone: V1
      tests: ["alert_handler_smoke"]
    }
    {
      name: esc_accum
      desc: '''
            Based on the smoke test, this test will focus on testing the escalation accumulation
            feature. So all the escalations in the test will be triggered by alert accumulation.'''
      milestone: V2
      tests: ["alert_handler_esc_alert_accum"]
    }
    {
      name: esc_timeout
      desc: '''
           Based on the smoke test, this test will focus on testing the escalation timeout
           feature. So all the escalations in the test will be triggered by interrupt timeout.'''
      milestone: V2
      tests: ["alert_handler_esc_intr_timeout"]
    }
    {
      name: entropy
      desc: '''
            Based on the smoke test, this test enables ping testing, and check if the ping feature
            correctly pings all devices within certain period of time'''
      milestone: V2
      tests: ["alert_handler_entropy"]
    }
    {
      name: sig_int_fail
      desc: '''
            This test will randomly inject differential pair failures on alert tx/rx pairs and the
            escalator tx/rx pairs. Then check if integrity failure alert is triggered and escalated'''
      milestone: V2
      tests: ["alert_handler_sig_int_fail"]
    }
    {
      name: ping_corner_cases
      desc: '''
            Based on the entropy test, this test will randomly inject ping timeout errors and ping
            signal integrity errors on alert tx/rx or escalator tx/rx pairs.
            Once a ping request is detected, the sequence will randomly execute one of the three
            tasks:
            - Interrupt the ping by a reset
            - Inject alerts without any delay. This task attempts to hit the corner case where
              esc ping is interrupted by real esc signal
            - Let the ping response finish without any interruption. This taks attempts to hit the
              ping timeout and ping signal integrity fail corner case
            Then the sequence will read and check all the alert and esc status registers. Then
            clear the interrupts.
            Because alert_handler module's ping interval default value is relative long for
            simulation, this test shortens this interval in order to hit all the corner cases in
            a reasonable amount of run time. This test also disables ping related functional
            coverage to ensure the original LFSR design is able to reach all the alerts and
            escalators'''
      milestone: V2
      tests: ["alert_handler_ping_corner_cases"]
    }
    {
      name: clk_skew
      desc: '''
            This test will randomly inject clock skew within the differential pairs. Then check no
            alert is raised'''
      milestone: V2
      tests: ["alert_handler_smoke"]
    }
    {
      name: random_alerts
      desc: "Input random alerts and randomly write phase cycles"
      milestone: V2
      tests: ["alert_handler_random_alerts"]
    }
    {
      name: random_classes
      desc: "Based on random_alerts test, this test will also randomly enable interrupt classes"
      milestone: V2
      tests: ["alert_handler_random_classes"]
    }
    {
      name: stress_all
      desc: '''
            Combine above sequences in one test to run sequentially with the following exclusions:
            - CSR sequences: scoreboard disabled
            - Ping_corner_cases sequence: included reset in the sequence'''
      milestone: V2
      tests: ["alert_handler_stress_all"]
    }
  ]
}