hw/top_earlgrey/ip/padctrl/data/autogen/padctrl.hjson

// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
//
// ------------------- W A R N I N G: A U T O - G E N E R A T E D   C O D E !! -------------------//
// PLEASE DO NOT HAND-EDIT THIS FILE. IT HAS BEEN AUTO-GENERATED WITH THE FOLLOWING COMMAND:
// util/topgen.py -t hw/top_earlgrey/data/top_earlgrey.hjson -o hw/top_earlgrey/

// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
//
# PADCTRL register template
#
# Parameter (given by Python tool)
#  - n_dio_pads:      Number of dedicated IO pads
#  - n_mio_pads:      Number of muxed IO pads
#  - attr_dw:         Attribute datawidth
{
  name: "PADCTRL",
  clock_primary: "clk_i",
  bus_device: "tlul",
  regwidth: "32",
  param_list: [
    { name: "NDioPads",
      desc: "Number of dedicated IO pads",
      type: "int",
      default: "15",
      local: "true"
    },
    { name: "NMioPads",
      desc: "Number of muxed IO pads",
      type: "int",
      default: "32",
      local: "true"
    },
    { name: "AttrDw",
      desc: "Pad attribute data width",
      type: "int",
      default: "10",
      local: "true"
    },
  ],
  registers: [
    { name: "REGEN",
      desc: '''
            Register write enable for all control registers.
            ''',
      swaccess: "rw0c",
      hwaccess: "none",
      fields: [
        {
            bits:   "0",
            name: "wen",
            desc: ''' When true, all configuration registers can be modified.
            When false, they become read-only. Defaults true, write zero to clear.
            '''
            resval: 1,
        },
      ]
    },
# dedicated pads
    { multireg: { name:     "DIO_PADS",
                  desc:     '''Dedicated pad attributes.
                  This register has WARL behavior as some attributes may not be implemented.
                  ''',
                  count:    "NDioPads",
                  swaccess: "rw",
                  hwaccess: "hrw",
                  hwext:    "true",
                  hwqe:     "true",
                  regwen:   "REGEN",
                  cname:    "ATTR",
                  fields: [
                    { bits: "9:0",
                      name: "ATTR",
                      desc: '''Bit   0: input/output inversion,
                               Bit   1: Virtual open drain enable.
                               Bit   2: Pull enable.
                               Bit   3: Pull select (0: pull down, 1: pull up).
                               Bit   4: Keeper enable.
                               Bit   5: Schmitt trigger enable.
                               Bit   6: Slew rate (0: slow, 1: fast).
                               Bit 7/8: Drive strength (00: weakest, 11: strongest).
                               Bit   9: Reserved.
                      '''
                      resval: 0
                    }
                  ],
                  // these CSRs have WARL behavior and may not
                  // read back the same value that was written to them.
                  // further, they have hardware side effects since they drive the
                  // pad attributes, and hence no random data should be written to them.
                  tags: ["excl:CsrAllTests:CsrExclWrite"]
                }
    },
# muxed pads
    { multireg: { name:     "MIO_PADS",
                  desc:     '''Muxed pad attributes.
                  This register has WARL behavior as some attributes may not be implemented.
                  ''',
                  count:    "NMioPads",
                  swaccess: "rw",
                  hwaccess: "hrw",
                  hwext:    "true",
                  hwqe:     "true",
                  regwen:   "REGEN",
                  cname:    "ATTR",
                  fields: [
                    { bits: "9:0",
                      name: "ATTR",
                      desc: '''Bit   0: input/output inversion,
                               Bit   1: Virtual open drain enable.
                               Bit   2: Pull enable.
                               Bit   3: Pull select (0: pull down, 1: pull up).
                               Bit   4: Keeper enable.
                               Bit   5: Schmitt trigger enable.
                               Bit   6: Slew rate (0: slow, 1: fast).
                               Bit 7/8: Drive strength (00: weakest, 11: strongest).
                               Bit   9: Reserved.
                      '''
                      resval: 0
                    }
                  ],
                  // these CSRs have WARL behavior and may not
                  // read back the same value that was written to them.
                  // further, they have hardware side effects since they drive the
                  // pad attributes, and hence no random data should be written to them.
                  tags: ["excl:CsrAllTests:CsrExclWrite"]
                }
    },
  ],
}