hw/ip/pinmux/data/pinmux_fpv_testplan.hjson

// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{
  name: "pinmux"
  import_testplans: ["hw/dv/tools/dvsim/testplans/fpv_csr_testplan.hjson"]
  testpoints: [
    // `mio_to_periph_o` tests.
    // Symbolic variable `periph_sel_i` is used to select a specific `mio_to_periph_o` pin.
    {
      name: InSel0_A
      desc: '''When register `periph_insel` is set to 0, which means the selected input is constant
             zero, the corresponding `mio_to_periph_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: InSel1_A
      desc: '''When register `periph_insel` is set to 1, which means the selected input is constant
            one, the corresponding `mio_to_periph_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: InSelN_A
      desc: '''When register `periph_insel` is set to any value between 2 and
            (2 + number of MioPads) and the select index is not jtag, the corresponding
            `mio_to_periph_o` must be equal to the related `mio_in_i` value.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: InSelOOB_A
      desc: '''When register `periph_insel` is set to any value larger than
            (2 + number of MioPads), the corresponding `mio_to_periph_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `mio_to_periph_o` backward tests
    // Symbolic variable `periph_sel_i` is used to select a specific `mio_to_periph_o` pin.
    {
      name: MioToPeriph0Backward_A
      desc: '''`mio_to_periph_o` should output 0 only if one of the following conditions meets:
            - Register `periph_insel` is set to 0.
            - The corresponding `mio_in_i` is 0.
            - Jtag is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: MioToPeriph1Backward_A
      desc: '''`mio_to_periph_o` should output 1 only if one of the following conditions meets:
            - Register `periph_insel` is set to 1.
            - The corresponding `mio_in_i` is 1.
            - Jtag is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `dio_to_periph_o` tests
    // Symbolic variable `dio_sel_i` is used to select a specific `dio_to_periph_o` pin.
    {
      name: DioInSelN_A
      desc: "This assertion checks that `dio_to_periph_o` is directly connected to `dio_in_i`."
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `mio_out_o` not in sleep_mode tests
    // Symbolic variable `mio_sel_i` is used to select a specific `mio_out_o` pin.
    {
      name: OutSel0_A
      desc: '''When register `mio_outsel` is set to 0 and is not in sleep mode or jtag, which means
            the selected output is constant zero, the corresponding `mio_out_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: OutSel1_A
      desc: '''When register `mio_outsel` is set to 1 and is not in sleep mode or jtag, which means
            the selected output is constant one, the corresponding `mio_out_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: OutSel2_A
      desc: '''When register `mio_outsel` is set to 2 and is not in sleep mode or jtag, which means
            the selected output is driving high-Z, the corresponding `mio_out_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: OutSelN_A
      desc: '''When register `mio_outsel` is set to any value between 3 and
            (3 + Number of periph out) and is not in sleep mode or jtag, the corresponding
            `mio_out_o` must be equal to the related `periph_to_mio_i` value.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: OutSelOOB_A
      desc: '''When register `mio_outsel` is set to any value larger than
            (3 + Number of periph out) and is not in sleep mode, the corresponding `mio_out_o` must
            be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `mio_out_o` backward tests
    // Symbolic variable `mio_sel_i` is used to select a specific `mio_out_o` pin.
    {
      name: MioOut0Backward_A
      desc: '''`mio_out_o` should output 0 only if one of the following conditions meets:
            - Register `mio_insel` is set to 0 or 2.
            - The corresponding `periph_to_mio_i` is 0.
            - Sleep mode is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: MioOut1Backward_A
      desc: '''`mio_out_o` should output 1 only if one of the following conditions meets:
            - Register `mio_insel` is set to 1.
            - The corresponding `periph_to_mio_i` is 1.
            - Sleep mode is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `mio_oe_o` not in sleep_mode tests
    // Symbolic variable `mio_sel_i` is used to select a specific `mio_out_o` pin.
    {
      name: OutSelOe0_A
      desc: '''When register `mio_outsel` is set to 0 and is not in sleep mode or jtag, the
            corresponding `mio_oe_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: OutSelOe1_A
      desc: '''When register `mio_outsel` is set to 1 and is not in sleep mode or jtag, the
            corresponding `mio_oe_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: OutSelOe2_A
      desc: '''When register `mio_outsel` is set to 2 and is not in sleep mode or jtag, which
            indicates driving high-Z to the selected output, the corresponding `mio_oe_o` must
            be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: OutSelOeN_A
      desc: '''When register `mio_outsel` is set to any value between 3 and
            (3 + Number of periph out) and is not in sleep mode or jtag, the corresponding
            `mio_oe_o` must be equal to the related `periph_to_mio_oe_i` value.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: OutSelOeOOB_A
      desc: '''When register `mio_outsel` is set to any value larger than
            (3 + Number of periph out) and is not in sleep mode, the corresponding `mio_oe_o` must
            be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `mio_oe_o` backward tests
    // Symbolic variable `mio_sel_i` is used to select a specific `mio_oe_o` pin.
    {
      name: MioOe0Backward_A
      desc: '''`mio_oe_o` should output 0 only if one of the following conditions meets:
            - Register `mio_insel` is set to 2.
            - The corresponding `periph_to_mio_oe_i` is 0.
            - Sleep mode is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: MioOe1Backward_A
      desc: '''`mio_oe_o` should output 1 only if one of the following conditions meets:
            - Register `mio_insel` is set to 0 or 1.
            - The corresponding `periph_to_mio_oe_i` is 1.
            - Sleep mode is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `mio_out_o` in sleep mode tests
    // Symbolic variable `mio_sel_i` is used to select a specific `mio_out_o` pin.
    {
      name: MioSleepMode0_A
      desc: '''At posedge of `sleep_en_i`, if register `mio_pad_sleep_en` is 1 and
            `mio_pad_sleep_mode` is 0, which means the pad is driven zero in deep sleep mode.
            If, in the meantime, register `mio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `mio_out_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioSleepMode1_A
      desc: '''At posedge of `sleep_en_i`, if register `mio_pad_sleep_en` is 1 and
            `mio_pad_sleep_mode` is 1, which means the pad is driven one in deep sleep mode.
            In the meantime, if register `mio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `mio_out_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioSleepMode2_A
      desc: '''At posedge of `sleep_en_i`, if register `mio_pad_sleep_en` is 1 and
            `mio_pad_sleep_mode` is 2, which means the pad is driven high-Z in deep sleep mode.
            In the meantime, if register `mio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `mio_out_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioSleepMode3_A
      desc: '''At posedge of `sleep_en_i`, if register `mio_pad_sleep_en` is 1 and
            `mio_pad_sleep_mode` is 3, which means the pad keeps last driven value in deep sleep
            mode.
            In the meantime, if register `mio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `mio_out_o` should be stable.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioSleepStable_A
      desc: '''If not at posedge of `sleep_en_i`, and in the meantime register
            `mio_pad_sleep_status` is not written via TLUL interface to clear the sleep status, the
            corresponding `mio_out_o` should be stable.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `mio_oe_o` in sleep mode tests
    // Symbolic variable `mio_sel_i` is used to select a specific `mio_oe_o` pin.
    {
      name: MioOeSleepMode0_A
      desc: '''At posedge of `sleep_en_i`, if register `mio_pad_sleep_en` is 1 and
            `mio_pad_sleep_mode` is 0, which means the pad is driven zero in deep sleep mode.
            In the meantime, if register `mio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `mio_oe_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioOeSleepMode1_A
      desc: '''At posedge of `sleep_en_i`, if register `mio_pad_sleep_en` is 1 and
            `mio_pad_sleep_mode` is 1, which means the pad is driven one in deep sleep mode.
            In the meantime, if register `mio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `mio_oe_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioOeSleepMode2_A
      desc: '''At posedge of `sleep_en_i`, if register `mio_pad_sleep_en` is 1 and
            `mio_pad_sleep_mode` is 2, which means the pad is driven high-Z in deep sleep mode.
            In the meantime, if register `mio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `mio_oe_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioOeSleepMode3_A
      desc: '''At posedge of `sleep_en_i`, if register `mio_pad_sleep_en` is 1 and
            `mio_pad_sleep_mode` is 3, which means the pad keeps last driven value in deep sleep
            mode.
            In the meantime, if register `mio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `mio_oe_o` should be stable.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioOeSleepStable_A
      desc: '''If not at posedge of `sleep_en_i`, and in the meantime, if register
            `mio_pad_sleep_status` is not written via TLUL interface to clear the sleep status, the
            corresponding `mio_oe_o` should be stable.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `mio_out_o` sleep mode related backward tests
    // Symbolic variable `mio_sel_i` is used to select a specific `mio_out_o` pin.
    {
      name: MioSleep0Backward_A
      desc: '''`mio_out_o` should output 0 only if one of the following conditions meets:
            - In sleep mode, register `mio_pad_sleep_mode` is set to 0 or 2.
            - In sleep mode, previous `mio_out_o` is 0 and `mio_pad_sleep_mode` is set to 3.
            - In sleep mode, previous `mio_out_o` is 0 and input `sleep_en_i` is not at posedge.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: MioSleep1Backward_A
      desc: '''`mio_out_o` should output 1 only if one of the following conditions meets:
            - In sleep mode, register `mio_pad_sleep_mode` is set to 1.
            - In sleep mode, previous `mio_out_o` is 1 and `mio_pad_sleep_mode` is set to 3.
            - In sleep mode, previous `mio_out_o` is 1 and input `sleep_en_i` is not at posedge.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `mio_oe_o` sleep mode related backward tests
    // Symbolic variable `mio_sel_i` is used to select a specific `mio_oe_o` pin.
    {
      name: MioOeSleep0Backward_A
      desc: '''`mio_oe_o` should output 0 only if one of the following conditions meets:
            - In sleep mode, register `mio_pad_sleep_mode` is set to 2.
            - In sleep mode, previous `mio_oe_o` is 0 and `mio_pad_sleep_mode` is set to 3.
            - In sleep mode, previous `mio_oe_o` is 0 and input `sleep_en_i` is not at posedge.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: MioOeSleep1Backward_A
      desc: '''`mio_oe_o` should output 1 only if one of the following conditions meets:
            - In sleep mode, register `mio_pad_sleep_mode` is set to 0 or 1.
            - In sleep mode, previous `mio_oe_o` is 1 and `mio_pad_sleep_mode` is set to 3.
            - In sleep mode, previous `mio_oe_o` is 1 and input `sleep_en_i` is not at posedge.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `dio_out_o` not in sleep mode tests
    // Symbolic variable `dio_sel_i` is used to select a specific `dio_out_o` pin.
    {
      name: DOutSelN_A
      desc: "`dio_out_o` is connected to `periph_to_dio_i` if not in sleep mode."
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `dio_oe_o` not in sleep mode tests
    // Symbolic variable `dio_sel_i` is used to select a specific `dio_oe_o` pin.
    {
      name: DOutSelOeN_A
      desc: "`dio_oe_o` is connected to `periph_to_dio_oe_i` if not in sleep mode."
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `dio_out_o` in sleep mode tests
    // Symbolic variable `dio_sel_i` is used to select a specific `dio_out_o` pin.
    {
      name: DioSleepMode0_A
      desc: '''At posedge of `sleep_en_i`, if register `dio_pad_sleep_en` is 1 and
            `dio_pad_sleep_mode` is 0, which means the pad is driven zero in deep sleep mode.
            In the meantime, if register `dio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `dio_out_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DioSleepMode1_A
      desc: '''At posedge of `sleep_en_i`, if register `dio_pad_sleep_en` is 1 and
            `dio_pad_sleep_mode` is 1, which means the pad is driven one in deep sleep mode.
            In the meantime, if register `dmio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `dio_out_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DioSleepMode2_A
      desc: '''At posedge of `sleep_en_i`, if register `dio_pad_sleep_en` is 1 and
            `dio_pad_sleep_mode` is 2, which means the pad is driven high-Z in deep sleep mode.
            In the meantime, if register `dio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `dio_out_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DioSleepMode3_A
      desc: '''At posedge of `sleep_en_i`, if register `dio_pad_sleep_en` is 1 and
            `dio_pad_sleep_mode` is 3, which means the pad keeps last driven value in deep sleep
            mode.
            In the meantime, if register `dio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `dio_out_o` should be stable.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DioSleepStable_A
      desc: '''If not at posedge of `sleep_en_i`, and in the meantime, if register
            `dio_pad_sleep_status` is not written via TLUL interface to clear the sleep status, the
            corresponding `dio_out_o` should be stable.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `dio_oe_o` in sleep mode tests
    // Symbolic variable `dio_sel_i` is used to select a specific `dio_oe_o` pin.
    {
      name: DioOeSleepMode0_A
      desc: '''At posedge of `sleep_en_i`, if register `dio_pad_sleep_en` is 1 and
            `dio_pad_sleep_mode` is 0, which means the pad is driven zero in deep sleep mode.
            In the meantime, if register `dio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `dio_oe_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DioOeSleepMode1_A
      desc: '''At posedge of `sleep_en_i`, if register `dio_pad_sleep_en` is 1 and
            `dio_pad_sleep_mode` is 1, which means the pad is driven one in deep sleep mode.
            In the meantime, if register `dio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `dio_oe_o` must be 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DioOeSleepMode2_A
      desc: '''At posedge of `sleep_en_i`, if register `dio_pad_sleep_en` is 1 and
            `dio_pad_sleep_mode` is 2, which means the pad is driven high-Z in deep sleep mode.
            In the meantime, if register `dio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `dio_oe_o` must be 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DioOeSleepMode3_A
      desc: '''At posedge of `sleep_en_i`, if register `dio_pad_sleep_en` is 1 and
            `dio_pad_sleep_mode` is 3, which means the pad keeps last driven value in deep sleep
            mode.
            In the meantime, if register `dio_pad_sleep_status` is not written via TLUL interface
            to clear the sleep status, the corresponding `dio_oe_o` should be stable.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DioOeSleepStable_A
      desc: '''If not at posedge of `sleep_en_i`, and in the meantime, if register
            `dio_pad_sleep_status` is not written via TLUL interface to clear the sleep status, the
            corresponding `dio_oe_o` should be stable.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `dio_out_o` backward tests
    // Symbolic variable `dio_sel_i` is used to select a specific `dio_out_o` pin.
    {
      name: Dio0Backward_A
      desc: '''`dio_out_o` should output 0 only if one of the following conditions meets:
            - The corresponding `periph_to_dio_i` is 0.
            - In sleep mode, register `dio_pad_sleep_mode` is set to 0 or 2.
            - In sleep mode, previous `dio_out_o` is 0 and `dio_pad_sleep_mode` is set to 3.
            - In sleep mode, previous `dio_out_o` is 0 and input `sleep_en_i` is not at posedge.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: Dio1Backward_A
      desc: '''`dio_out_o` should output 1 only if one of the following conditions meets:
            - The corresponding `periph_to_dio_i` is 1.
            - In sleep mode, register `dio_pad_sleep_mode` is set to 1.
            - In sleep mode, previous `dio_out_o` is 1 and `dio_pad_sleep_mode` is set to 3.
            - In sleep mode, previous `dio_out_o` is 1 and input `sleep_en_i` is not at posedge.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `dio_oe_o` backward tests
    // Symbolic variable `dio_sel_i` is used to select a specific `dio_oe_o` pin.
    {
      name: DioOe0Backward_A
      desc: '''`dio_oe_o` should output 0 only if one of the following conditions meets:
            - The corresponding `periph_to_dio_i` is 0.
            - In sleep mode, register `dio_pad_sleep_mode` is set to 2.
            - In sleep mode, previous `dio_oe_o` is 0 and `dio_pad_sleep_mode` is set to 3.
            - In sleep mode, previous `dio_oe_o` is 0 and input `sleep_en_i` is not at posedge.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: DioOe1Backward_A
      desc: '''`dio_oe_o` should output 1 only if one of the following conditions meets:
            - The corresponding `periph_to_dio_i` is 1.
            - In sleep mode, register `dio_pad_sleep_mode` is set to 0 or 1.
            - In sleep mode, previous `dio_oe_o` is 1 and `dio_pad_sleep_mode` is set to 3.
            - In sleep mode, previous `dio_oe_o` is 1 and input `sleep_en_i` is not at posedge.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `mio_pad_attr_o` tests
    {
      name: MioAttrO_A
      desc: '''`mio_attr_o` should be equal to corresponding `mio_pad_attr` register value and
            TargetCfg's mio_pad_type configuration.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: MioJtagAttrO_A
      desc: "If jtag is enabled, the jtag `mio_attr_o` index should be equal to 0."
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `dio_pad_attr_o` tests
    {
      name: DioAttrO_A
      desc: '''`dio_attr_o` should be equal to corresponding `dio_pad_attr` register value and
            TargetCfg's dio_pad_type configuration.'''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `pin_wkup_req_o` tests
    // Symbolic variable `wkup_sel_i` is used to select a specific wkup_cause.
    // Variable `final_pin_val` is created to capture selected wakeup pins based on register
    // `wkup_detector_padsel` and `wkup_detector.filter`.
    {
      name: WkupPosedge_A
      desc: '''When register `wkup_detector_en` is set to 1 and `wkup_detector.mode` is set to 0,
            which means rising edge is used to detect wakeup. If variable `final_pin_val` is at
            posedge then `wkup_cause` register's `de` attribute should be set to 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: WkupNegedge_A
      desc: '''When register `wkup_detector_en` is set to 1 and `wkup_detector.mode` is set to 1,
            which means falling edge is used to detect wakeup. If variable `final_pin_val` is at
            negedge, then `wkup_cause` register's `de` attribute should be set to 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: WkupEdge_A
      desc: '''When register `wkup_detector_en` is set to 1 and `wkup_detector.mode` is set to 2,
            which means either rising or falling edge is used to detect wakeup. If variable
            `final_pin_val` is at posedge or negedge, then `wkup_cause` register's `de` attribute
            should be set to 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: WkupTimedHigh_A
      desc: '''When register `wkup_detector_en` is set to 1 and `wkup_detector.mode` is set to 3,
            which means postive pulse cycles are used to detect wakeup. If variable `final_pin_val`
            stays high longer than the threshold, then `wkup_cause` register's `de` attribute
            should be set to 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: WkupTimedLow_A
      desc: '''When register `wkup_detector_en` is set to 1 and `wkup_detector.mode` is set to 4,
            which means negative pulse cycles are used to detect wakeup. If variable `final_pin_val`
            stays low longer than the threshold, then `wkup_cause` register's `de` attribute should
            be set to 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: WkupCauseQ_A
      desc: '''When `wkup_cause` register's `de` attribute is set to 1 and user is not writing to
            `wkup_cause` at the same cycle, then `wkup_cause.q` should be set to 1.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: AonWkupO_A
      desc: '''When register `wkup_cause` is 1, `pin_wkup_req_o` should also be 1.
            `pin_wkup_req_o` is 0 only when all `wkup_cause` registers are 0.'''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // `pin_wkup_req_o` backward tests
    {
      name: WkupCause0_A
      desc: "Register `wkup_cause` is 0 only when none of the above wakeup conditions is met."
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: WkupCause1_A
      desc: "Register `wkup_cause` is 1 when at least one of the above wakeup conditions is met."
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `lc_jtag_o` tests
    {
      name: LcJtagWoScanmode_A
      desc: '''Not in scanmode, when tap_strap select LC_tap, `lc_jtag_o` must be equal to the
            corresponding `mio_in_i` pins based on the `TargetCfg` configuration.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: LcJtagWScanmode_A
      desc: '''In scanmode, when tap_strap select LC_tap, `lc_jtag_o` must be equal to the
            corresponding `mio_in_i` pins based on the `TargetCfg` configuration except the
            `jtag_trst` pin, which must be equal to `rst_ni`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: LcJtagODefault_A
      desc: "`lc_jtag_o` should stay 0 if tap_strap did not select LC_tap."
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: LcJtagOBackward_A
      desc: '''`lc_jtag_o` pins are equal to the corresponding `mio_in_i` inputs if one of the
            following conditions are met:
            - Lc Jtag is disabled and the corresponding pins are 0.
            - Lc Jtag is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `rv_jtag_o` tests
    {
      name: RvJtagWoScanmode_A
      desc: '''Not in scanmode, when tap_strap select RV_tap and `lc_hw_debug_en_i` input is On for
            the past two clock cycles due to the synchronizer, then `rv_jtag_o` must be equal to
            the corresponding `mio_in_i` pins based on the `TargetCfg` configuration.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: RvJtagWScanmode_A
      desc: '''In scanmode, When tap_strap select RV_tap and `lc_hw_debug_en_i` is On for the past
            two clock cycles due to the synchronizer, then `rv_jtag_o` must be equal to the
            corresponding `mio_in_i` pins based on the `TargetCfg` configuration except the
            `jtag_trst` pin, which must be equal to `rst_ni`.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: RvJtagODefault_A
      desc: '''`rv_jtag_o` should stay 0 if tap_strap did not select RV_tap or `lc_hw_debug_en_i`
            input is Off for the past two clock cycles due to the synchronizer.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: RvJtagOBackward_A
      desc: '''`rv_jtag_o` pins are equal to the corresponding `mio_in_i` inputs if one of the
            following conditions are met:
            - Rv Jtag is disabled and the corresponding pins are 0.
            - Rv Jtag is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    // `dft_jtag_o` tests
    {
      name: DftJtagWoScanmode_A
      desc: '''Not in scanmode, when tap_strap select DFT_tap and `lc_dft_en_i` is On for the past
            two clock cycles due to the synchronizer, `lc_jtag_o` must be equal to the
            corresponding `mio_in_i` pins based on the `TargetCfg` configuration.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DftJtagWScanmode_A
      desc: '''In scanmode, when tap_strap select DFT_tap and `lc_dft_en_i` is On for the past
            two clock cycles due to the synchronizer, `lc_jtag_o` must be equal to the
            corresponding `mio_in_i` pins based on the `TargetCfg` configuration except the
            `jtag_trst` pin, which must be equal to `rst_ni`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DftJtagODefault_A
      desc: '''`dft_jtag_o` should stay 0 if tap_strap did not select DFT_tap or the `lc_dft_en_i`
            input is Off for the past two clock cycles due to the synchronizer.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DftJtagOBackward_A
      desc: '''`dft_jtag_o` pins are equal to the corresponding `mio_in_i` inputs if one of the
            following conditions are met:
            - Dft Jtag is disabled and the corresponding pins are 0.
            - Dft Jtag is enabled.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }
    {
      name: DftJtagO1Backward_A
      desc: '''`dft_jtag_o` pins are ones if one of the following conditions are met:
            - Dft Jtag is enabled and the corresponding pins are 1.
            '''
      stage: V2
      tests: ["pinmux_assert"]
    }

    {
      name: TapStrap_A
      desc: '''If `dft_hold_tap_sel_i` is 0 and `lc_dft_en_i` is On for the past two clock cycles
            due to the synchronizer, or `strap_en_i` is 1.
            And in the meantime, if `lc_hw_debug_en_i` is On for the past two clock cycles due to
            the synchronizer, then tap_strap must be equal to the past value of corresponding
            `mio_in_i`.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: TapStrap0_A
      desc: '''If `dft_hold_tap_sel_i` is 0 and `lc_dft_en_i` is On for the past two clock cycles
            due to the synchronizer, or `strap_en_i` is 1.
            Then tap_strap[0] must be equal to the past value of corresponding `mio_in_i`.
            '''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // Jtag pinmux output tests
    {
      name: LcJtagI_A
      desc: '''When Lc tap is selected, the corresponding `mio_out_o` and `mio_out_oe` should be
            equal to `lc_jtag_i`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: RvJtagI_A
      desc: '''When Rv tap is selected and `lc_hw_debug_en_i` is On for the past two clock cycles
            due to the synchronizer, the corresponding `mio_out_o` and `mio_out_oe` should be equal
            to `rv_jtag_i`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DftJtagI_A
      desc: '''When Dft tap is selected and `lc_dft_en_i` is On for the past two clock cycles
            due to the synchronizer, the corresponding `mio_out_o` and `mio_out_oe` should be equal
            to `dft_jtag_i`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }

    // Dft `strap_test_o` tests
    {
      name: DftStrapTestO_A
      desc: '''When `lc_dft_en_i` is On for the past two clock cycles due to the synchronizer,
            `dft_strap_test_o.valid` must be 1, and `dft_strap_test_o.straps` should be equal to
            the corresponding `mio_in_i` index.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DftStrapTestOValidStable_A
      desc: "`dft_strap_test_o.valid` once set to 1 will stay high until reset."
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: DftStrapTestOStrapStable_A
      desc: "`dft_strap_test_o.valid` once set, `dft_strap_test_o.straps` should stay stable."
      stage: V1
      tests: ["pinmux_assert"]
    }

    // USB related IOs.
    // Current plan is to only check connectivity via assertions because usbdev design is fully
    // verified separately in a DV testbench.
    {
      name: UsbSleepEnI_A
      desc: "`sleep_en_i` should be connected directly to usbdev's `low_power_alw_i`."
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbDppullupEnUpwrI_A
      desc: '''`usb_dppullup_en_upwr_i` should be connected directly to usbdev's
            `usb_dppullup_en_upwr_i`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbDnpullupEnUpwrI_A
      desc: '''`usb_dnpullup_en_upwr_i` should be connected directly to usbdev's
            `usb_dnpullup_en_upwr_i`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbDppullupEnO_A
      desc: '''`usb_dppullup_en_o` should be connected directly to usbdev's
            `usb_dppullup_en_o`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbDnpullupEnO_A
      desc: '''`usb_dnpullup_en_o` should be connected directly to usbdev's
            `usb_dnpullup_en_o`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbOutOfRstI_A
      desc: "`usb_out_of_rst_i` should be connected directly to usbdev's `usb_out_of_rst_upwr_i`."
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbAonWakeEnUpwrI_A
      desc: '''`usb_aon_wake_en_i` should be connected directly to usbdev's
            `usb_aon_wake_en_upwr_i`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbAonWakeAckUpwrI_A
      desc: '''`usb_aon_wake_ack_i` should be connected directly to usbdev's
            `usb_aon_woken_upwr_i`.'''
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbSuspendI_A
      desc: "`usb_suspend_i` should be connected directly to usbdev's `usb_suspended_upwr_i`."
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbWkupReqO_A
      desc: "`usb_wkup_req_o` should be connected directly to usbdev's `wake_rep_alw_o`."
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbBusResetO_A
      desc: "`usb_bus_reset_o` should be connected directly to usbdev's `bus_reset_alw_o`."
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbSenseLostO_A
      desc: "`usb_sense_lost_o` should be connected directly to usbdev's `bus_lost_alw_o`."
      stage: V1
      tests: ["pinmux_assert"]
    }
    {
      name: UsbStateDebugO_A
      desc: "`usb_state_debug_o` should be connected directly to usbdev's `bus_debug_o`."
      stage: V1
      tests: ["pinmux_assert"]
    }
 ]
}