hw/ip/sram_ctrl/data/sram_ctrl.hjson

// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{ name: "sram_ctrl",
  clock_primary: "clk_i",
  other_clock_list: [
    "clk_otp_i", // OTP clock
  ],
  reset_primary: "rst_ni",
  other_reset_list: [
    "rst_otp_ni" // OTP reset
  ]

  bus_device: "tlul",
  bus_host: "none",

  ///////////////////////////
  // Interrupts and Alerts //
  ///////////////////////////

  alert_list: [
    { name: "fatal_parity_error",
      desc: "An uncorrectable parity error has occurred in the SRAM."
    }
  ],

  ////////////////
  // Parameters //
  ////////////////
  param_list: [
    { name:      "RndCnstSramKey",
      desc:      "Compile-time random reset value for SRAM scrambling key.",
      type:      "otp_ctrl_pkg::sram_key_t"
      randcount: "128",
      randtype:  "data", // randomize randcount databits
    }
    { name:      "RndCnstSramNonce",
      desc:      "Compile-time random reset value for SRAM scrambling nonce.",
      type:      "otp_ctrl_pkg::sram_nonce_t"
      randcount: "64",
      randtype:  "data", // randomize randcount databits
    }
  ]

  /////////////////////////////
  // Intermodule Connections //
  /////////////////////////////

  inter_signal_list: [
    // Key request to OTP
    { struct:  "sram_otp_key"
      type:    "req_rsp"
      name:    "sram_otp_key"
      act:     "req"
      default: "'0"
      package: "otp_ctrl_pkg"
    }
    // Interface with SRAM scrambling wrapper
    { struct:  "sram_scr"
      type:    "req_rsp"
      name:    "sram_scr"
      act:     "req"
      default: "'0"
      package: "sram_ctrl_pkg"
    }
    // Broadcast from LC
    { struct:  "lc_tx"
      type:    "uni"
      name:    "lc_escalate_en"
      act:     "rcv"
      default: "lc_ctrl_pkg::Off"
      package: "lc_ctrl_pkg"
    }
  ] // inter_signal_list

  regwidth: "32",
  registers: [

    ////////////////////////
    // Ctrl / Status CSRs //
    ////////////////////////

    { name: "STATUS",
      desc: "SRAM status register.",
      swaccess: "ro",
      hwaccess: "hwo",
      hwqe:     "false",
      hwext:    "true",
      fields: [
        { bits: "0"
          name: "ERROR"
          desc: '''
                Set to 1 if an uncorrectable parity error has occurred in the SRAM macro.
                The address of the faulty access is exposed in the !!ERROR_ADDRESS register
                for debugging purposes. This is an unrecoverable error condition and causes
                the SRAM controller to continuously send out fatal_parity_error alerts.
                The error bit is sticky and can only be cleared via a reset.
                '''
        }
        { bits: "1"
          name: "ESCALATED"
          desc: '''
                Set to 1 if the sram controller has received an escalate request.
                If this is set to 1, the scrambling keys have been reset to the default values
                and all subsequent memory requests will be blocked.
                This condition is terminal.
                '''
        }
        { bits: "2"
          name: "SCR_KEY_VALID"
          desc: '''
                Set to 1 if a new scrambling key has been successfully obtained from OTP.
                Note that if this is set to 0, the SRAM contents are still scrambled, but a
                default all-zero key and nonce are used to do so.
                '''
        }
        { bits: "3"
          name: "SCR_KEY_SEED_VALID"
          desc: '''
                Set to 1 if the scrambling key has been derived from a valid key seed in OTP.
                If !!STATUS.SCR_KEY_VALID is set to 1, !!STATUS.SCR_KEY_SEED_VALID should be 1
                except for cases where the scrambling key seeds have not yet been provisioned to
                OTP. In such a case, the scrambling key is still ephemeral (i.e., it is derived
                using entropy from CSRNG), but a default all-zero value is used as the key seed.
                '''
        }
      ]
    }
    { name: "CTRL_REGWEN",
      desc: "Lock register for control register.",
      swaccess: "rw1c",
      hwaccess: "none",
      fields: [
        { bits: "0"
          desc: '''
                When cleared to zero, !!CTRL can not be written anymore.
                ''',
          resval: 1
        }
      ]
    }
    { name: "CTRL",
      desc: "SRAM ctrl register.",
      swaccess: "wo",
      hwaccess: "hro",
      hwqe:     "true",
      hwext:    "true",
      regwen:   "CTRL_REGWEN"
      fields: [
        { bits: "0",
          name: "RENEW_SCR_KEY",
          desc: '''
                Write 1 to request a new scrambling key from OTP. After writing to this register, SRAM transactions will
                be blocked until !!STATUS.SCR_KEY_VALID has been set to 1. If !!STATUS.SCR_KEY_VALID was already 1
                before triggering a key renewal, hardware will automatically clear that status bit such that software
                can poll its status. Note that requesting a new scrambling key takes ~200 OTP cycles, which translates
                to ~800 CPU cycles (OTP runs at 24MHz, CPU runs at 100MHz). Note that writing 1 to this register while
                a key request is pending has no effect.
                '''
        }
      ]
    }

    { name: "ERROR_ADDRESS",
      desc: "Error address register.",
      swaccess: "ro",
      hwaccess: "hwo",
      hwqe:     "false",
      hwext:    "false",
      fields: [
        { bits: "31:0"
          name: "ADDRESS"
          desc: '''
                Contains the byte address of the last parity error.
                '''
        }
      ]
    }
  ],
}