hw/top_earlgrey/lint/top_earlgrey.waiver

# Copyright lowRISC contributors.
# Licensed under the Apache License, Version 2.0, see LICENSE for details.
# SPDX-License-Identifier: Apache-2.0
#
# waiver file for top_earlgrey

# dedicated reset drivers / muxes
set_reset_drivers prim_clock_mux2 prim_flop_2sync prim_flop
set_clock_drivers prim_clock_buf prim_clock_mux2

# All leaf resets have a reset multiplex
waive -rules RESET_MUX -location {top_earlgrey.sv} -regexp {Asynchronous reset .*rstmgr_aon_resets\.rst.* is driven by a multiplexer} \
      -comment "This is dedicated reset infrastructure, and hence permissible"

waive -rules RESET_MUX -location {rstmgr.sv rstmgr_por.sv rstmgr_ctrl.sv} -regexp {Asynchronous reset '(resets_o\.)?rst_[A-Za-z_0-9]+_n(\[[0-9:]+\])?' is driven by a multiplexer} \
      -comment "This is dedicated reset infrastructure, and hence permissible"

waive -rules RESET_MUX -location {rstmgr.sv} -regexp {Asynchronous reset 'scan_rst_ni' reaches a multiplexer} \
      -comment "This is dedicated reset infrastructure, and hence permissible"

waive -rules CLOCK_USE -location {top_earlgrey.sv} -regexp {'clkmgr_aon_clocks.clk_io_div2_peri' is connected to 'spi_device' port 'scan_clk_i', and used as a clock} \
      -comment "This connection is a scan clock connection."

waive -rules CLOCK_MUX -location {clkmgr.sv top_earlgrey.sv} -regexp {.*clk_io_div.* is driven by a multiplexer here} \
      -comment "Divided clocks go through prim_clock_div, which use muxes for scan bypass and clock step down"

# scan reset is a legal asynchronous reset
waive -rules RESET_USE -location {top_earlgrey.sv} -regexp {'scan_rst_ni' is connected to .* port 'scan_rst_ni', and used as an asynchronous reset or set 'rst_ni' at} \
      -comment "Scan reset is a legal asynchronous reset"

# Combo loops through uart loopback can be ignored
waive -rules {COMBO_LOOP} -location {chip_earlgrey_asic.sv} -regexp {'tx' driven in module 'uart_core' by 'rx' at uart_core.sv} \
      -comment "there is technically a loopback path through uart, however RX / TX should never be configured to the same pin"

# Combo loops through sysrst_ctrl inversion can be ignored (TODO: need to double check, are the inversions meant to be direct?)
waive -rules {COMBO_LOOP} -location {chip_earlgrey_asic.sv} -regexp {'cio_key2_out_o' driven in module 'sysrst_ctrl_inv' by 'key2_out_int' at sysrst_ctrl_inv.sv} \
      -comment "sysrst_ctrl creates a feed through path directly for certain muxed pins"

waive -rules {SAME_NAME_TYPE} -location {*} -regexp {.*} \
      -comment "same names across modules are allowed to exist at the top level"

## xbar
#waive -rules HIER_NET_NOT_READ -location {tlul_xbar.sv} -regexp {a_source.* is not read from} \
#      -comment "upper bits of a_source are shifted off when going through M:1 sockets"
#waive -rules LINE_LENGTH -location {xbar_main.sv} -regexp {Line length of .* exceeds 100 character limit} \
#      -comment "This is a generated file and it is hence permissible to have line lengths that exceed this limit"