| *** Settings *** |
| Suite Setup Setup |
| Suite Teardown Teardown |
| Test Setup Reset Emulation |
| Test Teardown Test Teardown |
| Resource ${RENODEKEYWORDS} |
| |
| *** Variables *** |
| # This variable is set to be 0 by default, and should be override in CLI to test debug |
| # sim/tests/test.sh --variable RUN_DEBUG:1 sim/tests/shodan_boot.robot |
| ${RUN_DEBUG} 0 |
| |
| ${LOG_TIMEOUT} 2 |
| ${ROOTDIR} ${CURDIR}/../.. |
| ${SCRIPT} sim/config/shodan.resc |
| ${PROMPT} CANTRIP> |
| ${UART5} sysbus.uart5 |
| |
| ${MATCHA_BUNDLE_RELEASE} ${ROOTDIR}/out/matcha-bundle-release.elf |
| ${MATCHA_BUNDLE_DEBUG} ${ROOTDIR}/out/matcha-bundle-debug.elf |
| |
| ${CANTRIP_KERNEL_RELEASE} ${ROOTDIR}/out/cantrip/riscv32-unknown-elf/release/kernel/kernel.elf |
| ${CANTRIP_ROOTSERVER_RELEASE} ${ROOTDIR}/out/cantrip/riscv32-unknown-elf/release/capdl-loader |
| |
| ${CANTRIP_KERNEL_DEBUG} ${ROOTDIR}/out/cantrip/riscv32-unknown-elf/debug/kernel/kernel.elf |
| ${CANTRIP_ROOTSERVER_DEBUG} ${ROOTDIR}/out/cantrip/riscv32-unknown-elf/debug/capdl-loader |
| |
| ${OUT_TMP} ${ROOTDIR}/out/tmp |
| |
| ${FLASH_RELEASE_TAR} out/ext_flash_release.tar |
| ${CPIO_RELEASE} out/cantrip/riscv32-unknown-elf/release/ext_builtins.cpio |
| ${FLASH_DEBUG_TAR} out/ext_flash_debug.tar |
| ${CPIO_DEBUG} out/cantrip/riscv32-unknown-elf/debug/ext_builtins.cpio |
| |
| *** Keywords *** |
| Prepare Machine |
| Execute Command path set @${ROOTDIR} |
| IF ${RUN_DEBUG} == 1 |
| Execute Command $tar=@${FLASH_DEBUG_TAR} |
| Execute Command $cpio=@${CPIO_DEBUG} |
| ELSE |
| Execute Command $tar=@${FLASH_RELEASE_TAR} |
| Execute Command $cpio=@${CPIO_RELEASE} |
| END |
| Execute Script ${SCRIPT} |
| # Add UART5 virtual time so we can check the machine execution time |
| Execute Command uart5-analyzer TimestampFormat Virtual |
| Execute Command cpu0 IsHalted false |
| Set Default Uart Timeout 10 |
| Create Log Tester ${LOG_TIMEOUT} |
| |
| Install App |
| [Arguments] ${app} |
| # UART analyzer is marked as transient so it needs to be set up at subtest. |
| Execute Command showAnalyzer "uart5-analyzer" ${UART5} Antmicro.Renode.Analyzers.LoggingUartAnalyzer |
| # Disable uart5 timestamp diff |
| Execute Command uart5-analyzer TimestampFormat None |
| Write Line To Uart install ${app}.app |
| Wait For Line on Uart Application "${app}" installed |
| Write Line To Uart start ${app} |
| Wait For Line On Uart Bundle "${app}" started |
| |
| Uninstall App |
| [Arguments] ${app} |
| Write Line To Uart stop ${app} |
| Wait For Line On Uart Bundle "${app}" stopped |
| Write Line To Uart uninstall ${app} |
| Wait For Line On Uart Bundle "${app}" uninstalled |
| |
| *** Test Cases *** |
| Prepare Flash Tarball |
| Run Process mkdir -p ${ROOTDIR}/out/tmp |
| |
| IF ${RUN_DEBUG} == 1 |
| Run Process cp -f ${MATCHA_BUNDLE_DEBUG} ${OUT_TMP}/matcha-tock-bundle-debug |
| Run Process riscv32-unknown-elf-strip ${OUT_TMP}/matcha-tock-bundle-debug |
| Run Process riscv32-unknown-elf-objcopy -O binary -g ${OUT_TMP}/matcha-tock-bundle-debug ${OUT_TMP}/matcha-tock-bundle.bin |
| Run Process ln -sfr ${CANTRIP_KERNEL_DEBUG} ${OUT_TMP}/kernel |
| Run Process ln -sfr ${CANTRIP_ROOTSERVER_DEBUG} ${OUT_TMP}/capdl-loader |
| Run Process tar -C ${OUT_TMP} -cvhf ${ROOTDIR}/${FLASH_DEBUG_TAR} matcha-tock-bundle.bin kernel capdl-loader |
| ELSE |
| Run Process cp -f ${MATCHA_BUNDLE_RELEASE} ${OUT_TMP}/matcha-tock-bundle-release |
| Run Process riscv32-unknown-elf-strip ${OUT_TMP}/matcha-tock-bundle-release |
| Run Process riscv32-unknown-elf-objcopy -O binary -g ${OUT_TMP}/matcha-tock-bundle-release ${OUT_TMP}/matcha-tock-bundle.bin |
| Run Process ln -sfr ${CANTRIP_KERNEL_RELEASE} ${OUT_TMP}/kernel |
| Run Process ln -sfr ${CANTRIP_ROOTSERVER_RELEASE} ${OUT_TMP}/capdl-loader |
| Run Process tar -C ${OUT_TMP} -cvhf ${ROOTDIR}/${FLASH_RELEASE_TAR} matcha-tock-bundle.bin kernel capdl-loader |
| END |
| Provides flash-tarball |
| |
| |
| Test Shodan Boot |
| Requires flash-tarball |
| Prepare Machine |
| Start Emulation |
| Create Terminal Tester ${UART5} |
| Wait For Prompt On Uart ${PROMPT} |
| # The following commented lines would cause the test failed to be saved. |
| Provides shodan-bootup |
| |
| Test Smoke Test |
| Requires shodan-bootup |
| # UART analyzer is marked as transient so it needs to be set up at subtest. |
| Execute Command showAnalyzer "uart5-analyzer" ${UART5} Antmicro.Renode.Analyzers.LoggingUartAnalyzer |
| # Add UART5 virtual time so we can check the machine execution time |
| Execute Command uart5-analyzer TimestampFormat Virtual |
| Write Line To Uart install mobilenet_v1_emitc_static.model |
| # Bundle ID needs to be retrieved at runtime |
| ${l}= Wait For Line On Uart Model "([^"]+)" installed treatAsRegex=true |
| Write Line to Uart test_mlexecute anything ${l.groups[0]} |
| Wait For Prompt On Uart ${PROMPT} |
| Wait For LogEntry "main returned: ", 0 |
| # Test timer |
| Write Line To Uart test_timer_blocking 10 |
| Wait For LogEntry Timer completed. |
| |
| Test C hello app (no SDK) |
| Requires shodan-bootup |
| Install App hello |
| Wait For Line On Uart I am a C app! |
| Wait For Line On Uart Done |
| Uninstall App hello |
| |
| # TODO(sleffler): This test failed with debug artifacts. |
| Test SDK keyval support (+SecurityCoordinator) |
| Requires shodan-bootup |
| Install App keyval |
| Wait For Line On Uart read(foo) failed as expected |
| Wait For Line On Uart write ok |
| Wait For Line On Uart read returned [49, 50, 51, 0 |
| Wait For Line On Uart delete ok |
| Wait For Line On Uart delete ok (for missing key) |
| Uninstall App keyval |
| |
| Test SDK log support |
| Requires shodan-bootup |
| Install App logtest |
| Wait For Line On Uart ping! |
| Wait For Line On Uart DONE |
| Uninstall App logtest |
| |
| Test panic app |
| Requires shodan-bootup |
| Install App panic |
| Wait For Line On Uart Goodbye, cruel world |
| Uninstall App panic |
| |
| Test SDK + TimerService (oneshot & periodic) |
| Requires shodan-bootup |
| Install App timer |
| Wait For Line On Uart sdk_timer_cancel returned Err(SDKInvalidTimer) with nothing running |
| Wait For Line On Uart sdk_timer_poll returned Ok(0) with nothing running |
| Wait For Line On Uart sdk_timer_oneshot returned Err(SDKNoSuchTimer) with an invalid timer id |
| # oneshot |
| Wait For Line On Uart Timer 0 started |
| Wait For Line On Uart Timer 0 completed |
| # periodic |
| Wait For Line On Uart Timer 1 started |
| Wait For Line On Uart Timer completed: mask 0b0010 ms 75 |
| Wait For Line On Uart Timer completed: mask 0b0010 ms 150 |
| # NB: 10 timer events |
| # NB: intentionally match "cancel"; the code has a typo so prints "canceld" :) |
| Wait For Line On Uart Timer 1 cancel |
| # 2x periodic with 2:1 durations |
| Wait For Line On Uart Timer 1 started |
| Wait For Line On Uart Timer 2 started |
| Wait For Line On Uart Timer completed: mask 0b0010 1 \ 1 2 \ 0 |
| Wait For Line On Uart Timer completed: mask 0b0010 1 \ 2 2 \ 0 |
| # NB: lots of timer events (2 timers running) |
| Wait For Line On Uart Timer completed: mask 0b0100 1 14 2 \ 7 |
| Wait For Line On Uart Timer 2 cancel |
| Wait For Line On Uart Timer 1 cancel |
| Wait For Line On Uart DONE |
| Uninstall App timer |
| |
| Test SDK + MlCoordinator (oneshot & periodic) |
| Requires shodan-bootup |
| # UART analyzer is marked as transient so it needs to be set up at subtest. |
| Execute Command showAnalyzer "uart5-analyzer" ${UART5} Antmicro.Renode.Analyzers.LoggingUartAnalyzer |
| # Add UART5 virtual time so we can check the machine execution time |
| Execute Command uart5-analyzer TimestampFormat Virtual |
| Write Line To Uart install mltest.app |
| Wait For Line On Uart Application "mltest" installed |
| Write Line To Uart install mobilenet_v1_emitc_static.model |
| Wait For Line On Uart Model "mobilenet_v1_emitc_static" installed |
| Write Line to Uart start mltest |
| Wait For Line On Uart sdk_model_oneshot(nonexistent) returned Err(SDKNoSuchModel) (as expected) |
| # start oneshot |
| Wait For Line On Uart mobilenet_v1_emitc_static started |
| Wait For LogEntry "main returned: ", 0 |
| Wait For Line On Uart mobilenet_v1_emitc_static completed |
| # start periodic |
| Wait For Line On Uart Model mobilenet_v1_emitc_static started |
| # NB: 10 runs of the model |
| FOR ${i} IN RANGE 10 |
| Wait For LogEntry "main returned: ", 0 |
| Wait For Line On Uart Model completed: mask 0b0001 |
| END |
| Wait For Line On Uart DONE |
| Write Line To Uart stop mltest |
| Wait For Line On Uart Bundle "mltest" stopped |
| Write Line To Uart uninstall mltest |
| Wait For Line On Uart Bundle "mltest" uninstalled |
| Write Line To Uart uninstall mobilenet_v1_emitc_static |
| Wait For Line On Uart Bundle "mobilenet_v1_emitc_static" uninstalled |
