| :name: HPS |
| :description: This script runs the HPS Demo |
| |
| $name?="matcha" |
| |
| using sysbus |
| mach create $name |
| EnsureTypeIsLoaded "Antmicro.Renode.Peripherals.CPU.RiscV32" |
| include @sim/config/shodan_infrastructure/SpringbokRiscV32.cs |
| EnsureTypeIsLoaded "Antmicro.Renode.Peripherals.CPU.SpringbokRiscV32" |
| EnsureTypeIsLoaded "Antmicro.Renode.Peripherals.CPU.SpringbokRiscV32_ControlBlock" |
| include @sim/config/shodan_infrastructure/SmcRiscV32.cs |
| include @sim/config/shodan_infrastructure/OpenTitan2_UART.cs |
| include @sim/config/shodan_infrastructure/Mailbox.cs |
| include @sim/config/shodan_infrastructure/AddressRangeStub.cs |
| include @sim/config/shodan_infrastructure/CamCtrl.cs |
| include @sim/config/shodan_infrastructure/DoubleBufferDMA.cs |
| include @sim/config/shodan_infrastructure/NetUart.cs |
| |
| machine LoadPlatformDescription @sim/config/platforms/hps.repl |
| |
| cam_i2c.camera AddFrame @out/springbok_iree/quant_models/hps_0_quant_input |
| cam_i2c.camera AddFrame @out/springbok_iree/quant_models/hps_1_quant_input |
| cam_i2c.camera AddFrame @out/springbok_iree/quant_models/hps_2_quant_input |
| cam_i2c.camera AddFrame @out/springbok_iree/quant_models/hps_3_quant_input |
| cam_i2c.camera AddFrame @out/springbok_iree/quant_models/hps_4_quant_input |
| cam_i2c.camera AddFrame @out/springbok_iree/quant_models/hps_5_quant_input |
| |
| $term_port?=3456 |
| emulation CreateServerSocketTerminal $term_port "term" false |
| connector Connect uart5 term |
| # for a client, bash users may consider this inline script: |
| # |
| # stty sane -echo -icanon; socat TCP:localhost:$term_port -; stty sane |
| # |
| # tmux users may consider adding a binding to ~/.tmux.conf |
| # |
| # bind-key k split-window "stty -echo -icanon; socat TCP:localhost:$term_port -" |
| |
| # Hook up the analyzers to the uarts so we can see their output in the main |
| # Renode log |
| showAnalyzer "uart0-analyzer" sysbus.uart0 Antmicro.Renode.Analyzers.LoggingUartAnalyzer |
| showAnalyzer "uart5-analyzer" sysbus.uart5 Antmicro.Renode.Analyzers.LoggingUartAnalyzer |
| |
| # Set the uarts host/virt timestamp format. Options: None, Virtual, Host, Full. |
| uart0-analyzer TimestampFormat None |
| uart5-analyzer TimestampFormat None |
| |
| # Load the bootrom into the 32k rom at 0x8000 (useVirtualAddress = false, allowLoadsOnlyToMemory = true) |
| sysbus LoadELF @out/shodan_boot_rom/multihart_boot_rom/multihart_boot_rom.elf false true cpu0 |
| |
| # Load the tarball of Tock on SEC, Tock on SMC, and HPS model. |
| $tar ?= @out/hps_ext_flash_release.tar |
| sysbus LoadBinary $tar 0x44000000 |
| |
| # Start cpu0 at the bootrom entry point. |
| sysbus.cpu0 PC 0x8090 |
| |
| # Start the vector core at address 0 of its instruction TCM. |
| sysbus.cpu2 PC 0x34000000 |
| # Set the vector core to be less interactive to IO for faster execution |
| $vector_core_mips ?= 1000 |
| sysbus.cpu2 PerformanceInMips $vector_core_mips |
| |
| # Start GDB and halt both cores so we can connect GDB before the bootrom has |
| # started. |
| $gdb_port?=3333 |
| machine StartGdbServer $gdb_port false cpu0 |
| machine StartGdbServer $gdb_port false cpu1 |
| machine StartGdbServer $gdb_port false cpu2 |
| |
| cpu0 IsHalted true |
| cpu1 IsHalted true |
| cpu2 IsHalted true |
