| /* |
| * Copyright 2023 Google LLC |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| |
| #include "hw/top_matcha/sw/autogen/top_matcha.h" |
| #include "sw/device/lib/arch/device.h" |
| #include "sw/device/lib/dif/dif_smc_ctrl.h" |
| #include "sw/device/lib/dif/dif_uart.h" |
| #include "sw/device/lib/runtime/hart.h" |
| #include "sw/device/lib/runtime/log.h" |
| #include "sw/device/lib/runtime/print.h" |
| #include "sw/device/lib/testing/test_framework/check.h" |
| #include "sw/device/lib/testing/test_framework/ottf_test_config.h" |
| #include "sw/device/lib/testing/test_framework/status.h" |
| #include "sw/device/lib/testing/test_framework/test_util.h" |
| |
| OTTF_DEFINE_TEST_CONFIG(); |
| |
| static dif_uart_t uart; |
| static dif_smc_ctrl_t smc_ctrl; |
| |
| void _ottf_main(void) { |
| uint32_t en_result, regwen_result; |
| |
| // Initialize the UART to enable logging for non-DV simulation platforms. |
| if (kDeviceType != kDeviceSimDV) { |
| init_uart(TOP_MATCHA_UART0_BASE_ADDR, &uart); |
| } |
| |
| LOG_INFO("Hello Shodan!"); |
| |
| // Start testing |
| test_status_set(kTestStatusInTest); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_init( |
| mmio_region_from_addr(TOP_MATCHA_SMC_CTRL_BASE_ADDR), &smc_ctrl)); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_read_en(&smc_ctrl, &en_result)); |
| CHECK(en_result == 0, "smc_ctrl is not initilized: expected : 0 | actual: %d", |
| en_result); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_set_en(&smc_ctrl), "Set CTRL_EN failed"); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_read_en(&smc_ctrl, &en_result)); |
| CHECK(en_result == 1, "ctrl_en is not set: expected : 1 | actual: %d", |
| en_result); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_read_regwen(&smc_ctrl, ®wen_result)); |
| CHECK(regwen_result == 1, |
| "regwen is not initialized: expected : 1 | actual: %d", regwen_result); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_clear_regwen(&smc_ctrl), "Clear REGWEN failed"); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_read_regwen(&smc_ctrl, ®wen_result)); |
| CHECK(regwen_result == 0, "regwen is not cleared: expected : 0 | actual: %d", |
| regwen_result); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_clear_en(&smc_ctrl), |
| "Clear CTRL_EN with REGWEN as 0 failed"); |
| |
| CHECK_DIF_OK(dif_smc_ctrl_read_en(&smc_ctrl, &en_result)); |
| CHECK(en_result == 1, |
| "ctrl_en should not be cleared: expected : 1 | actual: %d", en_result); |
| |
| test_status_set(kTestStatusPassed); |
| } |