| /* |
| * Copyright 2023 Google LLC |
| * Copyright lowRISC contributors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| |
| #include "dma_regs.h" |
| #include "hw/top_matcha/sw/autogen/top_matcha.h" |
| #include "ml_top_regs.h" |
| #include "spi_host_regs.h" |
| #include "sw/device/lib/base/abs_mmio.h" |
| #include "sw/device/lib/base/memory.h" |
| #include "sw/device/lib/dif/dif_aon_timer.h" |
| #include "sw/device/lib/dif/dif_base.h" |
| #include "sw/device/lib/dif/dif_clkmgr.h" |
| #include "sw/device/lib/dif/dif_dma.h" |
| #include "sw/device/lib/dif/dif_flash_ctrl.h" |
| #include "sw/device/lib/dif/dif_ml_top.h" |
| #include "sw/device/lib/dif/dif_pwrmgr.h" |
| #include "sw/device/lib/dif/dif_rstmgr.h" |
| #include "sw/device/lib/dif/dif_spi_host.h" |
| #include "sw/device/lib/dif/dif_uart.h" |
| #include "sw/device/lib/dif/dif_usbdev.h" |
| #include "sw/device/lib/runtime/log.h" |
| #include "sw/device/lib/testing/aon_timer_testutils.h" |
| #include "sw/device/lib/testing/flash_ctrl_testutils.h" |
| #include "sw/device/lib/testing/rstmgr_testutils.h" |
| #include "sw/device/lib/testing/test_framework/check.h" |
| #include "sw/device/lib/testing/test_framework/ottf_main.h" |
| #include "uart_regs.h" |
| #include "usbdev_regs.h" |
| |
| /** |
| * The peripherals used to test when the peri clocks are disabled are |
| * bit 0: clk_io_div4_peri: uart0 |
| * bit 1: clk_io_div2_peri: spi_host1 |
| * bit 2: clk_io_peri: spi_host0 |
| * bit 3: clk_usb_peri: usbdev |
| * bit 4: clk_video: |
| * bit 5: clk_ml: ml_top |
| * bit 6: clk_audio: |
| * bit 7: clk_smc: dma_smc |
| */ |
| |
| OTTF_DEFINE_TEST_CONFIG(); |
| |
| typedef struct peri_context { |
| void (*csr_access)(); // The function causing a timeout. |
| uint32_t address; // The address causing a timeout. |
| } peri_context_t; |
| |
| static dif_aon_timer_t aon_timer; |
| static dif_flash_ctrl_state_t flash_ctrl; |
| static dif_spi_host_t spi_host0; |
| static dif_spi_host_t spi_host1; |
| static dif_usbdev_t usbdev; |
| static dif_uart_t uart0; |
| static dif_ml_top_t ml_top; |
| static dif_dma_t dma_smc; |
| |
| OT_SECTION(".non_volatile_scratch") uint64_t hung_data_addr[4]; |
| |
| static void set_hung_address(dif_clkmgr_gateable_clock_t clock, |
| uint32_t value) { |
| uint32_t addr = |
| (uintptr_t)&hung_data_addr[clock] - TOP_MATCHA_FLASH_CTRL_MEM_BASE_ADDR; |
| uint32_t flash_word[2] = {value, 0}; |
| CHECK(flash_ctrl_testutils_write(&flash_ctrl, addr, 0, flash_word, |
| kDifFlashCtrlPartitionTypeData, 2)); |
| CHECK(hung_data_addr[clock] == value, "Unexpected mismatch on read back"); |
| LOG_INFO("The expected hung address for clock %d is 0x%x at 0x%x", clock, |
| value, addr); |
| } |
| |
| static void uart0_csr_access() { |
| dif_toggle_t state; |
| CHECK_DIF_OK(dif_uart_irq_set_enabled(&uart0, kDifUartIrqTxWatermark, |
| kDifToggleEnabled)); |
| CHECK_DIF_OK( |
| dif_uart_irq_get_enabled(&uart0, kDifUartIrqTxWatermark, &state)); |
| CHECK(state == kDifToggleEnabled); |
| } |
| |
| static void spi_host0_csr_access() { |
| dif_toggle_t state; |
| CHECK_DIF_OK(dif_spi_host_irq_set_enabled(&spi_host0, kDifSpiHostIrqSpiEvent, |
| kDifToggleEnabled)); |
| CHECK_DIF_OK( |
| dif_spi_host_irq_get_enabled(&spi_host0, kDifSpiHostIrqSpiEvent, &state)); |
| CHECK(state == kDifToggleEnabled); |
| } |
| |
| static void spi_host1_csr_access() { |
| dif_toggle_t state; |
| CHECK_DIF_OK(dif_spi_host_irq_set_enabled(&spi_host1, kDifSpiHostIrqSpiEvent, |
| kDifToggleEnabled)); |
| CHECK_DIF_OK( |
| dif_spi_host_irq_get_enabled(&spi_host1, kDifSpiHostIrqSpiEvent, &state)); |
| CHECK(state == kDifToggleEnabled); |
| } |
| |
| static void usbdev_csr_access() { |
| CHECK_DIF_OK(dif_usbdev_irq_set_enabled(&usbdev, kDifUsbdevIrqPowered, |
| kDifToggleEnabled)); |
| dif_toggle_t state; |
| CHECK_DIF_OK( |
| dif_usbdev_irq_get_enabled(&usbdev, kDifUsbdevIrqPowered, &state)); |
| CHECK(state == kDifToggleEnabled); |
| } |
| |
| static void ml_top_csr_access() { |
| CHECK_DIF_OK(dif_ml_top_irq_set_enabled(&ml_top, kDifMlTopIrqHostReq, |
| kDifToggleEnabled)); |
| dif_toggle_t state; |
| CHECK_DIF_OK( |
| dif_ml_top_irq_get_enabled(&ml_top, kDifMlTopIrqHostReq, &state)); |
| CHECK(state == kDifToggleEnabled); |
| } |
| |
| static void dma_smc_csr_access() { |
| CHECK_DIF_OK(dif_dma_irq_set_enabled(&dma_smc, kDifDmaIrqWriterDone, |
| kDifToggleEnabled)); |
| dif_toggle_t state; |
| CHECK_DIF_OK(dif_dma_irq_get_enabled(&dma_smc, kDifDmaIrqWriterDone, &state)); |
| CHECK(state == kDifToggleEnabled); |
| } |
| |
| peri_context_t peri_context[kTopMatchaGateableClocksLast + 1] = { |
| {uart0_csr_access, |
| TOP_MATCHA_UART0_BASE_ADDR + UART_INTR_ENABLE_REG_OFFSET}, |
| {spi_host1_csr_access, |
| TOP_MATCHA_SPI_HOST1_BASE_ADDR + SPI_HOST_INTR_ENABLE_REG_OFFSET}, |
| {spi_host0_csr_access, |
| TOP_MATCHA_SPI_HOST0_BASE_ADDR + SPI_HOST_INTR_ENABLE_REG_OFFSET}, |
| {usbdev_csr_access, |
| TOP_MATCHA_USBDEV_BASE_ADDR + USBDEV_INTR_ENABLE_REG_OFFSET}, |
| {}, |
| {ml_top_csr_access, |
| TOP_MATCHA_ML_TOP_CORE_BASE_ADDR + ML_TOP_INTR_ENABLE_REG_OFFSET}, |
| {}, |
| {dma_smc_csr_access, |
| TOP_MATCHA_DMA_SMC_BASE_ADDR + DMA_INTR_ENABLE_REG_OFFSET}}; |
| |
| /** |
| * Test that disabling a 'gateable' unit's clock causes the unit to become |
| * unresponsive to CSR accesses. Configure a watchdog reset, and if it triggers |
| * the test is successful. |
| */ |
| static void test_gateable_clocks_off(const dif_clkmgr_t *clkmgr, |
| const dif_pwrmgr_t *pwrmgr, |
| dif_clkmgr_gateable_clock_t clock) { |
| // Make sure the clock for the unit is on. |
| CHECK_DIF_OK( |
| dif_clkmgr_gateable_clock_set_enabled(clkmgr, clock, kDifToggleEnabled)); |
| // Enable watchdog bite reset. |
| CHECK_DIF_OK(dif_pwrmgr_set_request_sources(pwrmgr, kDifPwrmgrReqTypeReset, |
| kDifPwrmgrResetRequestSourceTwo, |
| kDifToggleEnabled)); |
| LOG_INFO("Testing peripheral clock %d", clock); |
| |
| // Bite after enough time has elapsed past the hung csr access. |
| uint32_t bite_us = (kDeviceType == kDeviceSimDV) ? 400 : 800; |
| uint32_t bite_cycles = aon_timer_testutils_get_aon_cycles_from_us(bite_us); |
| LOG_INFO("Setting bite reset for %u us (%u cycles)", bite_us, bite_cycles); |
| |
| // Make sure the CSR is accessible before turning the clock off. |
| (*peri_context[clock].csr_access)(); |
| LOG_INFO("CSR access was okay before disabling the clock"); |
| |
| // Save the expected hung address to check against cpu_info's LAST_DATA_ADDR. |
| set_hung_address(clock, peri_context[clock].address); |
| // Set bite timer. |
| aon_timer_testutils_watchdog_config(&aon_timer, UINT32_MAX, bite_cycles, |
| false); |
| // Disable the peripheral's clock. |
| CHECK_DIF_OK( |
| dif_clkmgr_gateable_clock_set_enabled(clkmgr, clock, kDifToggleDisabled)); |
| // Wait for the clock to really turn off. |
| busy_spin_micros(100); |
| // And issue the CSR access that will freeze and cause a reset. |
| (*peri_context[clock].csr_access)(); |
| } |
| |
| /** |
| * Turn off the clock for 400us, then turn on |
| * Check the result in chip_sw_clkmgr_off_peri_vseq |
| */ |
| static void test_gateable_clocks_off_without_reset( |
| const dif_clkmgr_t *clkmgr, dif_clkmgr_gateable_clock_t clock) { |
| // Make sure the clock for the unit is on. |
| CHECK_DIF_OK( |
| dif_clkmgr_gateable_clock_set_enabled(clkmgr, clock, kDifToggleEnabled)); |
| |
| LOG_INFO("Testing peripheral clock %d", clock); |
| |
| // Disable the peripheral's clock. |
| CHECK_DIF_OK( |
| dif_clkmgr_gateable_clock_set_enabled(clkmgr, clock, kDifToggleDisabled)); |
| // Wait for the clock to really turn off. |
| busy_spin_micros(400); |
| // Enalbe the clock |
| CHECK_DIF_OK( |
| dif_clkmgr_gateable_clock_set_enabled(clkmgr, clock, kDifToggleEnabled)); |
| } |
| |
| bool test_main(void) { |
| dif_clkmgr_t clkmgr; |
| dif_pwrmgr_t pwrmgr; |
| dif_rstmgr_t rstmgr; |
| |
| CHECK_DIF_OK(dif_rstmgr_init( |
| mmio_region_from_addr(TOP_MATCHA_RSTMGR_AON_BASE_ADDR), &rstmgr)); |
| |
| CHECK_DIF_OK(dif_clkmgr_init( |
| mmio_region_from_addr(TOP_MATCHA_CLKMGR_AON_BASE_ADDR), &clkmgr)); |
| |
| CHECK_DIF_OK(dif_pwrmgr_init( |
| mmio_region_from_addr(TOP_MATCHA_PWRMGR_AON_BASE_ADDR), &pwrmgr)); |
| |
| CHECK_DIF_OK(dif_flash_ctrl_init_state( |
| &flash_ctrl, |
| mmio_region_from_addr(TOP_MATCHA_FLASH_CTRL_CORE_BASE_ADDR))); |
| |
| // Initialize aon timer. |
| CHECK_DIF_OK(dif_aon_timer_init( |
| mmio_region_from_addr(TOP_MATCHA_AON_TIMER_AON_BASE_ADDR), &aon_timer)); |
| |
| // Initialize peripherals. |
| CHECK_DIF_OK( |
| dif_uart_init(mmio_region_from_addr(TOP_MATCHA_UART0_BASE_ADDR), &uart0)); |
| CHECK_DIF_OK(dif_spi_host_init( |
| mmio_region_from_addr(TOP_MATCHA_SPI_HOST0_BASE_ADDR), &spi_host0)); |
| CHECK_DIF_OK(dif_spi_host_init( |
| mmio_region_from_addr(TOP_MATCHA_SPI_HOST1_BASE_ADDR), &spi_host1)); |
| CHECK_DIF_OK(dif_usbdev_init( |
| mmio_region_from_addr(TOP_MATCHA_USBDEV_BASE_ADDR), &usbdev)); |
| CHECK_DIF_OK(dif_ml_top_init( |
| mmio_region_from_addr(TOP_MATCHA_ML_TOP_CORE_BASE_ADDR), &ml_top)); |
| CHECK_DIF_OK(dif_dma_init(mmio_region_from_addr(TOP_MATCHA_DMA_SMC_BASE_ADDR), |
| &dma_smc)); |
| |
| // Enable cpu dump capture. |
| CHECK_DIF_OK(dif_rstmgr_cpu_info_set_enabled(&rstmgr, kDifToggleEnabled)); |
| |
| // Enable raw flash access. |
| flash_ctrl_testutils_default_region_access(&flash_ctrl, |
| /*rd_en*/ true, |
| /*prog_en*/ true, |
| /*erase_en*/ true, |
| /*scramble_en*/ false, |
| /*ecc_en*/ false, |
| /*he_en*/ false); |
| |
| if (rstmgr_testutils_is_reset_info(&rstmgr, kDifRstmgrResetInfoPor)) { |
| rstmgr_testutils_pre_reset(&rstmgr); |
| |
| // Starting clock. |
| dif_clkmgr_gateable_clock_t clock = kTopMatchaGateableClocksIoDiv4Peri; |
| LOG_INFO("Next clock to test %d", flash_ctrl_testutils_counter_get(0)); |
| |
| test_gateable_clocks_off(&clkmgr, &pwrmgr, clock); |
| |
| // This should never be reached. |
| LOG_ERROR("This is unreachable since a reset should have been triggered"); |
| return false; |
| } else if (rstmgr_testutils_is_reset_info(&rstmgr, |
| kDifRstmgrResetInfoWatchdog)) { |
| dif_clkmgr_gateable_clock_t clock = flash_ctrl_testutils_counter_get(0); |
| LOG_INFO("Got an expected watchdog reset when reading for clock %d", clock); |
| |
| size_t actual_size; |
| CHECK_DIF_OK(dif_rstmgr_cpu_info_get_size(&rstmgr, &actual_size)); |
| // Verify the cpu crash dump. |
| dif_rstmgr_cpu_info_dump_segment_t cpu_dump[DIF_RSTMGR_CPU_INFO_MAX_SIZE]; |
| size_t size_read; |
| CHECK_DIF_OK(dif_rstmgr_cpu_info_dump_read( |
| &rstmgr, cpu_dump, DIF_RSTMGR_CPU_INFO_MAX_SIZE, &size_read)); |
| CHECK(size_read <= DIF_RSTMGR_CPU_INFO_MAX_SIZE); |
| CHECK(size_read == actual_size); |
| LOG_INFO("EXC_ADDR = 0x%x", cpu_dump[0]); |
| LOG_INFO("EXC_PC = 0x%x", cpu_dump[1]); |
| LOG_INFO("LAST_DATA ADDR = 0x%x", cpu_dump[2]); |
| LOG_INFO("NEXT_PC = 0x%x", cpu_dump[3]); |
| LOG_INFO("CURRENT_PC = 0x%x", cpu_dump[4]); |
| LOG_INFO("PREV_EXC_ADDR = 0x%x", cpu_dump[5]); |
| LOG_INFO("PREV_EXC_PC = 0x%x", cpu_dump[6]); |
| LOG_INFO("PREV_VALID = 0x%x", cpu_dump[7]); |
| uint32_t expected_hung_address = hung_data_addr[clock]; |
| LOG_INFO("The expected hung address = 0x%x", expected_hung_address); |
| CHECK(cpu_dump[2] == expected_hung_address, "Unexpected hung address"); |
| // Mark this clock as tested. |
| flash_ctrl_testutils_counter_increment(&flash_ctrl, 0); |
| |
| if (clock < kTopMatchaGateableClocksLast) { |
| clock = flash_ctrl_testutils_counter_get(0); |
| LOG_INFO("Next clock to test %d", clock); |
| |
| if (clock == kTopMatchaGateableClocksIoDiv2Peri || |
| clock == kTopMatchaGateableClocksVideoPeri || |
| clock == kTopMatchaGateableClocksAudioPeri) { |
| test_gateable_clocks_off_without_reset(&clkmgr, clock); |
| |
| flash_ctrl_testutils_counter_increment(&flash_ctrl, 0); |
| clock = flash_ctrl_testutils_counter_get(0); |
| |
| if (clock == kTopMatchaGateableClocksLast) { |
| test_gateable_clocks_off_without_reset(&clkmgr, clock); |
| return true; |
| } |
| } |
| |
| rstmgr_testutils_pre_reset(&rstmgr); |
| |
| test_gateable_clocks_off(&clkmgr, &pwrmgr, clock); |
| |
| // This should never be reached. |
| LOG_ERROR("This is unreachable since a reset should have been triggered"); |
| return false; |
| } else { |
| return true; |
| } |
| } else { |
| dif_rstmgr_reset_info_bitfield_t reset_info; |
| reset_info = rstmgr_testutils_reason_get(); |
| LOG_ERROR("Unexpected reset_info 0x%x", reset_info); |
| } |
| return false; |
| } |