platforms/nexus/setup.sh - build - Git at Google

 #!/bin/bash
 #
 # Copyright 2020 Google LLC
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #     https://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.

 export C_PREFIX="riscv32-unknown-elf-"
 export IREE_PREFIX="riscv32-unknown-elf-"
 export IREE_ARCH="rv32imf"
 export RUST_PREFIX="riscv32-unknown-linux-gnu"

 # NB: $(CANTRIP_SRC_DIR)/apps/system/rust.cmake forces riscv32imac for
 #     the target when building Rust code
 export CANTRIP_TARGET_ARCH="riscv32-unknown-elf"

 # Shodan's toolchains are setup specially, just setup the environment.
 export RUSTDIR="${CACHE}/rust_toolchain"
 export CARGO_HOME="${RUSTDIR}"
 export RUSTUP_HOME="${RUSTDIR}"
 export PATH="${RUSTDIR}/bin:${PATH}"

 export OPENTITAN_GEN_DIR="${CANTRIP_OUT_DIR}/opentitan-gen/include/opentitan"
 export OPENTITAN_SOURCE="${ROOTDIR}/hw/opentitan-upstream"

 # Some build.rs files use the regtool crate which needs to know where to find
 # regtool.py.
 export REGTOOL="${OPENTITAN_SOURCE}/util/regtool.py"
 # The following files are the input to regtool.py
 export I2S_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/ip/i2s/data/i2s.hjson"
 export MBOX_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/ip/tlul_mailbox/data/tlul_mailbox.hjson"
 export ML_TOP_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/ip/ml_top/data/ml_top.hjson"
 export TIMER_HJSON="${OPENTITAN_GEN_DIR}/rv_timer.hjson"
 export UART_HJSON="${OPENTITAN_SOURCE}/hw/ip/uart/data/uart.hjson"
 export VC_TOP_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/ip/vc_top/data/vc_top.hjson"
 # Input for topgen_matcha.py to generate hw configuration
 export TOP_MATCHA_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/data/top_matcha.hjson"

 # Standard locations of Nexus configs and binaries
 export OT_TOOL="${ROOTDIR}/out/opentitantool"
 export NEXUS_JSON="${ROOTDIR}/out/nexus.json"
 export NEXUS_SPI_PASSTHRU="${ROOTDIR}/out/spi_passthrough_fpga_nexus.bin"

 function parting_messages() {
     if [[ ! -d "${RUSTDIR}" ]] ||
        [[ ! -d "${ROOTDIR}/cache/toolchain" ]] ||
        [[ ! -d "${ROOTDIR}/cache/toolchain_iree_rv32imf" ]] ||
        [[ ! -d "${ROOTDIR}/cache/renode" ]]; then
         echo
         echo '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
         echo You have missing tools. Please run \'m prereqs\' followed
         echo by \'m tools\' to install them.
         echo '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
         echo
         [[ -d "${RUSTDIR}" ]] || echo "${RUSTDIR} is missing!"
         [[ -d "${ROOTDIR}/cache/toolchain" ]] || echo "${ROOTDIR}/cache/toolchain is missing"
         [[ -d "${ROOTDIR}/cache/toolchain_iree_rv32imf" ]] || echo "${ROOTDIR}/cache/toolchain_iree_rv32imf is missing!"
         [[ -d "${ROOTDIR}/cache/renode" ]] || echo "${ROOTDIR}/cache/renode is missing!"
     fi
     echo Run \'set-nexus-id NN\' to set your Nexus board ID
 }

 function sim_kelvin
 {
     # Run the ELF/Bin program with kelvin_sim
     local bin_file="$(realpath $1)"
     local magic_bytes="$(xxd -p -l 4 ${bin_file})"
     local -a flags=()
     local is_elf=false
     if [[ ${magic_bytes} == "7f454c46" ]]; then
       is_elf=true
     else
       flags+=("--entry_point 0 ")
     fi

     if [[ "$2" == "debug" ]]; then
         flags+=("-i")
         if [[ "${is_elf}" == false ]]; then
             echo "debug mode only works on ELF files"
             return 1
         fi
     fi

     ("${OUT}/kelvin/sim/kelvin_sim" "${bin_file}" ${flags[@]})
 }

 function sim_kelvin_renode
 {
     # Run the Bin program with renode
     local bin_file="$(realpath $1)"
     local command="start;"

     (cd "${ROOTDIR}" && renode -e "\$bin=@${bin_file}; i @sim/config/kelvin.resc; \
         ${command} sysbus.ml_top_controlblock WriteDoubleWord 0xc 0" \
         --disable-xwt --console)

 }

 function set-nexus-id
 {
     local nexus_id="${1}"; shift

     if [[ -z "${nexus_id}" ]]; then
         (
             echo "Usage: set-nexus-id <NN>"
             echo
             echo "Sets the target Nexus board to run on.  Must be a two digit number"
             echo
         ) | fmt
         return 1
     fi
     if [[ "${#nexus_id}" -ne 2 ]]; then
         echo "Nexus number must be two digits"
         return 1
     fi

     export NEXUS_ID="${nexus_id}"
     # TODO(b/316200811) track down all the places we use a different variable name:
     export NEXUS_BOARD="${nexus_id}"
     export FPGA_BOARD_ID="${nexus_id}"
 }

 function opentitantool
 {
     # Run built opentitantool with standard flags
     if [[ -z "${NEXUS_ID}" ]]; then
         echo "Run set-nexus-id first"
         return 1
     fi

     "${OT_TOOL}" --conf "${NEXUS_JSON}" --interface nexus --usb-serial \
         "Nexus-FTDI-${NEXUS_ID}" "$@"
 }

 function nexus_reset
 {
     # Reset nexus board
     if [[ -z "${NEXUS_ID}" ]]; then
         echo "Run set-nexus-id first"
         return 1
     fi

     echo "Resetting nexus-${NEXUS_ID}"
     opentitantool gpio write RESET true
     opentitantool gpio write RESET false
     opentitantool gpio write RESET true
 }

 function nexus_flash
 {
     # Write tar file to nexus SPI flash and verify

     local flash_tar="$(realpath $1)"
     if [[ -z "${flash_tar}" ]]; then
         (
             echo "Usage: nexus_flash path/to/file.tar"
             echo
             echo "Writes tar file to Nexus SPI flash for booting."
             echo
         ) | fmt
         return 1
     fi

     if [[ -z "${NEXUS_ID}" ]]; then
         echo "Run set-nexus-id first"
         return 1
     fi

     if [[ ! -f "${NEXUS_SPI_PASSTHRU}" ]]; then
         echo "INFO: spi_passthrough binary not found at ${NEXUS_SPI_PASSTHRU}"
         echo "running `m spi_passthrough` to build it"
         m spi_passthrough
         if [[ "$?" -ne 0 ]]; then
             echo "ERROR: Unable to find or build spi_passthrough!"
             return 1
         fi
     fi

     nexus_reset

     local read_size="$(du -b ${flash_tar} | awk '{print $1}')"
     local erase_size="$(du -b ${flash_tar} \
         | awk '{ print $1 + (n - $1 % n) % n }' n=262144)"

     echo "Program SPI using ${NEXUS_SPI_PASSTHRU} on nexus-${NEXUS_ID}"
     opentitantool bootstrap "${NEXUS_SPI_PASSTHRU}"
     opentitantool spi block-erase --start 0 --length "${erase_size}"
     opentitantool spi program --start 0 "${flash_tar}"

     local readback_file="$(mktemp -d)/$(basename ${flash_tar}).readback"
     opentitantool  spi read --start 0 --length "${read_size}" "${readback_file}"
     diff "${flash_tar}" "${readback_file}"
     if [[ "$?" -ne 0 ]]; then
         echo "ERROR: Nexus flash verify failed!"
         return 1
     fi
     rm "${readback_file}"

     nexus_reset
 }

 function nexus_clear_flash
 {
     # Clear the first page of the SPI flash to prevent restarting from the
     # loaded program at the next reset.
     if [[ -z "${NEXUS_ID}" ]]; then
         echo "Run set-nexus-id first"
         return 1
     fi

     echo "Clearing nexus-${NEXUS_ID} SPI flash"
     nexus_reset
     opentitantool bootstrap "${NEXUS_SPI_PASSTHRU}"
     opentitantool spi block-erase --start 0 --length 262144
 }

 function nexus_mcu_write() {
     # Send command to the Nexus MCU REPL
     if [[ -z "${NEXUS_ID}" ]]; then
         echo "Run set-nexus-id first"
         return 1
     fi

     echo "Sending nexus-${NEXUS_ID} MCU the command: $@"
     nexus_mcu.py --nexus_id=${NEXUS_ID} "$@"
 }

 function nexus_load_bitstream
 {
     # Load bitstream file onto Nexus FPGA
     local bitstream_path="$(realpath $1)"
     if [[ -z "${bitstream_path}" ]]; then
         (
             echo "WARNING: No bitstream specified. Loading default bitstream"
             echo "from \$OUT/hw/bitstream/vivado/fpga_nexus_mask_test_rom.bit"
         ) | fmt
         bitstream_path="${OUT}/hw/bitstream/vivado/fpga_nexus_mask_test_rom.bit"
     fi

     if [[ -z "${NEXUS_ID}" ]]; then
         echo "Run set-nexus-id first"
         return 1
     fi

     if [[ ! -f "${bitstream_path}" ]]; then
         echo "ERROR: bitstream not found at ${bitstream_path}"
         return 1
     fi

     echo "Pushing ${bitstream_path} to nexus-${NEXUS_ID}"
     # Issue a no-op command to flush the character buffer in case it isn't empty
     nexus_mcu_write "help"
     scp "${bitstream_path}" "root@nexus${NEXUS_ID}:/mnt/mmcp1/"
     nexus_mcu_write "camera_powerdown"
     sleep 5
     local bitstream_name="$(basename ${bitstream_path})"
     ssh "root@nexus${NEXUS_ID}" "/mnt/mmcp1/zturn -d a /mnt/mmcp1/${bitstream_name}"
     nexus_mcu_write "camera_powerup"
 }

 function nexus_boot
 {
     # Boot the Nexus board.  If flashed, will boot from flash
     # This command is a synomym for `opentitantool boot`
     echo "Booting Nexus-${NEXUS_ID}"
     opentitantool boot
 }

 function nexus_bootstrap
 {
     # Bootstrap a binary on the Nexus board

     local binary="$(realpath $1)"
     if [[ -z "${binary}" ]]; then
         (
             echo "Usage: nexus_flash path/to/file.bin"
             echo
             echo "Run a binary on the nexus board."
             echo
         ) | fmt
         return 1
     fi
     echo "Bootstrapping ${binary} onto Nexus-${NEXUS_ID}"
     opentitantool bootstrap "${binary}"
 }
	#!/bin/bash
	#
	# Copyright 2020 Google LLC
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# https://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.

	export C_PREFIX="riscv32-unknown-elf-"
	export IREE_PREFIX="riscv32-unknown-elf-"
	export IREE_ARCH="rv32imf"
	export RUST_PREFIX="riscv32-unknown-linux-gnu"

	# NB: $(CANTRIP_SRC_DIR)/apps/system/rust.cmake forces riscv32imac for
	# the target when building Rust code
	export CANTRIP_TARGET_ARCH="riscv32-unknown-elf"

	# Shodan's toolchains are setup specially, just setup the environment.
	export RUSTDIR="${CACHE}/rust_toolchain"
	export CARGO_HOME="${RUSTDIR}"
	export RUSTUP_HOME="${RUSTDIR}"
	export PATH="${RUSTDIR}/bin:${PATH}"

	export OPENTITAN_GEN_DIR="${CANTRIP_OUT_DIR}/opentitan-gen/include/opentitan"
	export OPENTITAN_SOURCE="${ROOTDIR}/hw/opentitan-upstream"

	# Some build.rs files use the regtool crate which needs to know where to find
	# regtool.py.
	export REGTOOL="${OPENTITAN_SOURCE}/util/regtool.py"
	# The following files are the input to regtool.py
	export I2S_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/ip/i2s/data/i2s.hjson"
	export MBOX_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/ip/tlul_mailbox/data/tlul_mailbox.hjson"
	export ML_TOP_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/ip/ml_top/data/ml_top.hjson"
	export TIMER_HJSON="${OPENTITAN_GEN_DIR}/rv_timer.hjson"
	export UART_HJSON="${OPENTITAN_SOURCE}/hw/ip/uart/data/uart.hjson"
	export VC_TOP_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/ip/vc_top/data/vc_top.hjson"
	# Input for topgen_matcha.py to generate hw configuration
	export TOP_MATCHA_HJSON="${ROOTDIR}/hw/matcha/hw/top_matcha/data/top_matcha.hjson"

	# Standard locations of Nexus configs and binaries
	export OT_TOOL="${ROOTDIR}/out/opentitantool"
	export NEXUS_JSON="${ROOTDIR}/out/nexus.json"
	export NEXUS_SPI_PASSTHRU="${ROOTDIR}/out/spi_passthrough_fpga_nexus.bin"

	function parting_messages() {
	if [[ ! -d "${RUSTDIR}" ]] \|\|
	[[ ! -d "${ROOTDIR}/cache/toolchain" ]] \|\|
	[[ ! -d "${ROOTDIR}/cache/toolchain_iree_rv32imf" ]] \|\|
	[[ ! -d "${ROOTDIR}/cache/renode" ]]; then
	echo
	echo '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
	echo You have missing tools. Please run \'m prereqs\' followed
	echo by \'m tools\' to install them.
	echo '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
	echo
	[[ -d "${RUSTDIR}" ]] \|\| echo "${RUSTDIR} is missing!"
	[[ -d "${ROOTDIR}/cache/toolchain" ]] \|\| echo "${ROOTDIR}/cache/toolchain is missing"
	[[ -d "${ROOTDIR}/cache/toolchain_iree_rv32imf" ]] \|\| echo "${ROOTDIR}/cache/toolchain_iree_rv32imf is missing!"
	[[ -d "${ROOTDIR}/cache/renode" ]] \|\| echo "${ROOTDIR}/cache/renode is missing!"
	fi
	echo Run \'set-nexus-id NN\' to set your Nexus board ID
	}

	function sim_kelvin
	{
	# Run the ELF/Bin program with kelvin_sim
	local bin_file="$(realpath $1)"
	local magic_bytes="$(xxd -p -l 4 ${bin_file})"
	local -a flags=()
	local is_elf=false
	if [[ ${magic_bytes} == "7f454c46" ]]; then
	is_elf=true
	else
	flags+=("--entry_point 0 ")
	fi

	if [[ "$2" == "debug" ]]; then
	flags+=("-i")
	if [[ "${is_elf}" == false ]]; then
	echo "debug mode only works on ELF files"
	return 1
	fi
	fi

	("${OUT}/kelvin/sim/kelvin_sim" "${bin_file}" ${flags[@]})
	}

	function sim_kelvin_renode
	{
	# Run the Bin program with renode
	local bin_file="$(realpath $1)"
	local command="start;"

	(cd "${ROOTDIR}" && renode -e "\$bin=@${bin_file}; i @sim/config/kelvin.resc; \
	${command} sysbus.ml_top_controlblock WriteDoubleWord 0xc 0" \
	--disable-xwt --console)

	}

	function set-nexus-id
	{
	local nexus_id="${1}"; shift

	if [[ -z "${nexus_id}" ]]; then
	(
	echo "Usage: set-nexus-id <NN>"
	echo
	echo "Sets the target Nexus board to run on. Must be a two digit number"
	echo
	) \| fmt
	return 1
	fi
	if [[ "${#nexus_id}" -ne 2 ]]; then
	echo "Nexus number must be two digits"
	return 1
	fi

	export NEXUS_ID="${nexus_id}"
	# TODO(b/316200811) track down all the places we use a different variable name:
	export NEXUS_BOARD="${nexus_id}"
	export FPGA_BOARD_ID="${nexus_id}"
	}

	function opentitantool
	{
	# Run built opentitantool with standard flags
	if [[ -z "${NEXUS_ID}" ]]; then
	echo "Run set-nexus-id first"
	return 1
	fi

	"${OT_TOOL}" --conf "${NEXUS_JSON}" --interface nexus --usb-serial \
	"Nexus-FTDI-${NEXUS_ID}" "$@"
	}

	function nexus_reset
	{
	# Reset nexus board
	if [[ -z "${NEXUS_ID}" ]]; then
	echo "Run set-nexus-id first"
	return 1
	fi

	echo "Resetting nexus-${NEXUS_ID}"
	opentitantool gpio write RESET true
	opentitantool gpio write RESET false
	opentitantool gpio write RESET true
	}

	function nexus_flash
	{
	# Write tar file to nexus SPI flash and verify

	local flash_tar="$(realpath $1)"
	if [[ -z "${flash_tar}" ]]; then
	(
	echo "Usage: nexus_flash path/to/file.tar"
	echo
	echo "Writes tar file to Nexus SPI flash for booting."
	echo
	) \| fmt
	return 1
	fi

	if [[ -z "${NEXUS_ID}" ]]; then
	echo "Run set-nexus-id first"
	return 1
	fi

	if [[ ! -f "${NEXUS_SPI_PASSTHRU}" ]]; then
	echo "INFO: spi_passthrough binary not found at ${NEXUS_SPI_PASSTHRU}"
	echo "running `m spi_passthrough` to build it"
	m spi_passthrough
	if [[ "$?" -ne 0 ]]; then
	echo "ERROR: Unable to find or build spi_passthrough!"
	return 1
	fi
	fi

	nexus_reset

	local read_size="$(du -b ${flash_tar} \| awk '{print $1}')"
	local erase_size="$(du -b ${flash_tar} \
	\| awk '{ print $1 + (n - $1 % n) % n }' n=262144)"

	echo "Program SPI using ${NEXUS_SPI_PASSTHRU} on nexus-${NEXUS_ID}"
	opentitantool bootstrap "${NEXUS_SPI_PASSTHRU}"
	opentitantool spi block-erase --start 0 --length "${erase_size}"
	opentitantool spi program --start 0 "${flash_tar}"

	local readback_file="$(mktemp -d)/$(basename ${flash_tar}).readback"
	opentitantool spi read --start 0 --length "${read_size}" "${readback_file}"
	diff "${flash_tar}" "${readback_file}"
	if [[ "$?" -ne 0 ]]; then
	echo "ERROR: Nexus flash verify failed!"
	return 1
	fi
	rm "${readback_file}"

	nexus_reset
	}

	function nexus_clear_flash
	{
	# Clear the first page of the SPI flash to prevent restarting from the
	# loaded program at the next reset.
	if [[ -z "${NEXUS_ID}" ]]; then
	echo "Run set-nexus-id first"
	return 1
	fi

	echo "Clearing nexus-${NEXUS_ID} SPI flash"
	nexus_reset
	opentitantool bootstrap "${NEXUS_SPI_PASSTHRU}"
	opentitantool spi block-erase --start 0 --length 262144
	}

	function nexus_mcu_write() {
	# Send command to the Nexus MCU REPL
	if [[ -z "${NEXUS_ID}" ]]; then
	echo "Run set-nexus-id first"
	return 1
	fi

	echo "Sending nexus-${NEXUS_ID} MCU the command: $@"
	nexus_mcu.py --nexus_id=${NEXUS_ID} "$@"
	}

	function nexus_load_bitstream
	{
	# Load bitstream file onto Nexus FPGA
	local bitstream_path="$(realpath $1)"
	if [[ -z "${bitstream_path}" ]]; then
	(
	echo "WARNING: No bitstream specified. Loading default bitstream"
	echo "from \$OUT/hw/bitstream/vivado/fpga_nexus_mask_test_rom.bit"
	) \| fmt
	bitstream_path="${OUT}/hw/bitstream/vivado/fpga_nexus_mask_test_rom.bit"
	fi

	if [[ -z "${NEXUS_ID}" ]]; then
	echo "Run set-nexus-id first"
	return 1
	fi

	if [[ ! -f "${bitstream_path}" ]]; then
	echo "ERROR: bitstream not found at ${bitstream_path}"
	return 1
	fi

	echo "Pushing ${bitstream_path} to nexus-${NEXUS_ID}"
	# Issue a no-op command to flush the character buffer in case it isn't empty
	nexus_mcu_write "help"
	scp "${bitstream_path}" "root@nexus${NEXUS_ID}:/mnt/mmcp1/"
	nexus_mcu_write "camera_powerdown"
	sleep 5
	local bitstream_name="$(basename ${bitstream_path})"
	ssh "root@nexus${NEXUS_ID}" "/mnt/mmcp1/zturn -d a /mnt/mmcp1/${bitstream_name}"
	nexus_mcu_write "camera_powerup"
	}

	function nexus_boot
	{
	# Boot the Nexus board. If flashed, will boot from flash
	# This command is a synomym for `opentitantool boot`
	echo "Booting Nexus-${NEXUS_ID}"
	opentitantool boot
	}

	function nexus_bootstrap
	{
	# Bootstrap a binary on the Nexus board

	local binary="$(realpath $1)"
	if [[ -z "${binary}" ]]; then
	(
	echo "Usage: nexus_flash path/to/file.bin"
	echo
	echo "Run a binary on the nexus board."
	echo
	) \| fmt
	return 1
	fi
	echo "Bootstrapping ${binary} onto Nexus-${NEXUS_ID}"
	opentitantool bootstrap "${binary}"
	}