Fix ROM_INIT_FILE after build output changes
Recent work changed the directory structure in the build output
directory. Adjust references to ROM_INIT_FILE which were forgotten.
Fixes #1586
Signed-off-by: Philipp Wagner <phw@lowrisc.org>
diff --git a/hw/top_earlgrey/top_earlgrey_nexysvideo.core b/hw/top_earlgrey/top_earlgrey_nexysvideo.core
index ff97b19..4cb9c0e 100644
--- a/hw/top_earlgrey/top_earlgrey_nexysvideo.core
+++ b/hw/top_earlgrey/top_earlgrey_nexysvideo.core
@@ -30,14 +30,14 @@
parameters:
# XXX: This parameter needs to be absolute, or relative to the *.runs/synth_1
# directory. It's best to pass it as absolute path when invoking fusesoc, e.g.
- # --ROM_INIT_FILE=$PWD/build-bin/sw/device/fpga/boot_rom/boot_rom.vmem
+ # --ROM_INIT_FILE=$PWD/build-bin/sw/device/boot_rom/boot_rom_fpga_nexysvideo.vmem
# XXX: The VMEM file should be added to the sources of the Vivado project to
# make the Vivado dependency tracking work. However this requires changes to
# fusesoc first.
ROM_INIT_FILE:
datatype: str
description: ROM initialization file in vmem hex format
- default: "../../../../../build-bin/sw/device/fpga/boot_rom/boot_rom.vmem"
+ default: "../../../../../build-bin/sw/device/boot_rom/boot_rom_fpga_nexysvideo.vmem"
paramtype: vlogdefine
# For value definition, please see ip/prim/rtl/prim_pkg.sv
PRIM_DEFAULT_IMPL:
