[pinmux] Fix Xcelium compilation crash
Change `logic` to `wire` for all the signals those are passed to $size,
as a workaround to fix Xcelium crash
Cadence AE has created a case to fix this issue
Signed-off-by: Weicai Yang <weicai@google.com>
diff --git a/hw/ip/pinmux/rtl/pinmux.sv b/hw/ip/pinmux/rtl/pinmux.sv
index 5777e16..829efec 100644
--- a/hw/ip/pinmux/rtl/pinmux.sv
+++ b/hw/ip/pinmux/rtl/pinmux.sv
@@ -44,7 +44,7 @@
logic [pinmux_reg_pkg::NMioPads+2-1:0] data_mux;
// stack input and default signals for convenient indexing below
// possible defaults: constant 0 or 1
- assign data_mux = $size(data_mux)'({mio_in_i, 1'b1, 1'b0});
+ assign data_mux = $bits(data_mux)'({mio_in_i, 1'b1, 1'b0});
// index using configured insel
assign mio_to_periph_o[k] = data_mux[reg2hw.periph_insel[k].q];
// disallow undefined entries
@@ -59,8 +59,8 @@
logic [pinmux_reg_pkg::NPeriphOut+3-1:0] data_mux, oe_mux;
// stack output data/enable and default signals for convenient indexing below
// possible defaults: 0, 1 or 2 (high-Z)
- assign data_mux = $size(data_mux)'({periph_to_mio_i, 1'b0, 1'b1, 1'b0});
- assign oe_mux = $size(oe_mux)'({periph_to_mio_oe_i, 1'b0, 1'b1, 1'b1});
+ assign data_mux = $bits(data_mux)'({periph_to_mio_i, 1'b0, 1'b1, 1'b0});
+ assign oe_mux = $bits(oe_mux)'({periph_to_mio_oe_i, 1'b0, 1'b1, 1'b1});
// index using configured outsel
assign mio_out_o[k] = data_mux[reg2hw.mio_outsel[k].q];
assign mio_oe_o[k] = oe_mux[reg2hw.mio_outsel[k].q];
