[dif] Reorder definitions in dif_spi_device.h for consistency
Signed-off-by: Miguel Young de la Sota <mcyoung@google.com>
diff --git a/sw/device/lib/dif/dif_spi_device.h b/sw/device/lib/dif/dif_spi_device.h
index d2e7490..441171a 100644
--- a/sw/device/lib/dif/dif_spi_device.h
+++ b/sw/device/lib/dif/dif_spi_device.h
@@ -68,74 +68,6 @@
} dif_spi_device_toggle_t;
/**
- * A SPI interrupt request type.
- */
-typedef enum dif_spi_device_irq {
- /**
- * Indicates that the RX FIFO is full.
- */
- kDifSpiDeviceIrqRxFull,
- /**
- * Indicates that the RX FIFO is above the configured level.
- */
- kDifSpiDeviceIrqRxAboveLevel,
- /**
- * Indicates that the TX FIFO is below the configured level.
- */
- kDifSpiDeviceIrqTxBelowLevel,
- /**
- * Indicates an error in the RX FIFO.
- */
- kDifSpiDeviceIrqRxError,
- /**
- * Indicates that overflow has occured in the RX FIFO.
- */
- kDifSpiDeviceIrqRxOverflow,
- /**
- * Indicates that underflow has occured in the RX FIFO.
- */
- kDifSpiDeviceIrqTxUnderflow,
-} dif_spi_device_irq_t;
-
-/**
- * A snapshot of the enablement state of the interrupts for SPI.
- *
- * This is an opaque type, to be used with the
- * `dif_spi_device_irq_disable_all()` and
- * `dif_spi_device_irq_restore_all()` functions.
- */
-typedef uint32_t dif_spi_device_irq_snapshot_t;
-
-/**
- * The result of a SPI operation.
- */
-typedef enum dif_spi_device_result {
- /**
- * Indicates that the operation succeeded.
- */
- kDifSpiDeviceOk = 0,
- /**
- * Indicates some unspecified failure.
- */
- kDifSpiDeviceError = 1,
- /**
- * Indicates that some parameter passed into a function failed a
- * precondition.
- *
- * When this value is returned, no hardware operations occured.
- */
- kDifSpiDeviceBadArg = 2,
-} dif_spi_device_result_t;
-
-/**
- * The length of the SPI device FIFO buffer, in bytes.
- *
- * Useful for initializing FIFO lengths: for example, for equally-sized FIFOs,
- * `rx_fifo_len` and `tx_fifo_len` would be set to `kDifSpiDeviceBufferLen / 2`.
- */
-extern const uint16_t kDifSpiDeviceBufferLen;
-
-/**
* Hardware instantiation parameters for SPI.
*
* This struct describes information about the underlying hardware that is
@@ -187,6 +119,74 @@
} dif_spi_device_t;
/**
+ * The result of a SPI operation.
+ */
+typedef enum dif_spi_device_result {
+ /**
+ * Indicates that the operation succeeded.
+ */
+ kDifSpiDeviceOk = 0,
+ /**
+ * Indicates some unspecified failure.
+ */
+ kDifSpiDeviceError = 1,
+ /**
+ * Indicates that some parameter passed into a function failed a
+ * precondition.
+ *
+ * When this value is returned, no hardware operations occured.
+ */
+ kDifSpiDeviceBadArg = 2,
+} dif_spi_device_result_t;
+
+/**
+ * A SPI interrupt request type.
+ */
+typedef enum dif_spi_device_irq {
+ /**
+ * Indicates that the RX FIFO is full.
+ */
+ kDifSpiDeviceIrqRxFull,
+ /**
+ * Indicates that the RX FIFO is above the configured level.
+ */
+ kDifSpiDeviceIrqRxAboveLevel,
+ /**
+ * Indicates that the TX FIFO is below the configured level.
+ */
+ kDifSpiDeviceIrqTxBelowLevel,
+ /**
+ * Indicates an error in the RX FIFO.
+ */
+ kDifSpiDeviceIrqRxError,
+ /**
+ * Indicates that overflow has occured in the RX FIFO.
+ */
+ kDifSpiDeviceIrqRxOverflow,
+ /**
+ * Indicates that underflow has occured in the RX FIFO.
+ */
+ kDifSpiDeviceIrqTxUnderflow,
+} dif_spi_device_irq_t;
+
+/**
+ * A snapshot of the enablement state of the interrupts for SPI.
+ *
+ * This is an opaque type, to be used with the
+ * `dif_spi_device_irq_disable_all()` and
+ * `dif_spi_device_irq_restore_all()` functions.
+ */
+typedef uint32_t dif_spi_device_irq_snapshot_t;
+
+/**
+ * The length of the SPI device FIFO buffer, in bytes.
+ *
+ * Useful for initializing FIFO lengths: for example, for equally-sized FIFOs,
+ * `rx_fifo_len` and `tx_fifo_len` would be set to `kDifSpiDeviceBufferLen / 2`.
+ */
+extern const uint16_t kDifSpiDeviceBufferLen;
+
+/**
* Creates a new handle for SPI.
*
* This function does not actuate the hardware.
