//! High-level setup and interrupt mapping for the chip.

use core::fmt::Write;
use core::hint::unreachable_unchecked;
use kernel;
use kernel::debug;
use kernel::hil::time::Alarm;
use rv32i::csr::{mcause, mie::mie, mip::mip, mtvec::mtvec, CSR};
use rv32i::syscall::SysCall;
use rv32i::PMPConfigMacro;

use crate::timer;
use crate::uart;
use matcha_hal::plic;

PMPConfigMacro!(4);

pub const CHIP_NAME: &str = "sim_verilator";
pub const CHIP_CPU_FREQ: u32 = 500_000;
pub const CHIP_PERIPH_FREQ: u32 = 125_000;
pub const CHIP_UART_BPS: u32 = 9600;

pub const UART0_TX_WATERMARK: u32 = 1;
pub const UART0_RX_PARITY_ERR: u32 = 8;

pub struct Matcha<A: 'static + Alarm<'static>> {
    userspace_kernel_boundary: SysCall,
    pmp: PMP,
    scheduler_timer: kernel::VirtualSchedulerTimer<A>,
}

impl<A: 'static + Alarm<'static>> Matcha<A> {
    pub unsafe fn new(alarm: &'static A) -> Self {
        Self {
            userspace_kernel_boundary: SysCall::new(),
            pmp: PMP::new(),
            scheduler_timer: kernel::VirtualSchedulerTimer::new(alarm),
        }
    }

    pub unsafe fn enable_plic_interrupts(&self) {
        plic::disable_all();
        plic::clear_all_pending();
        plic::enable_all();
    }

    unsafe fn handle_plic_interrupts(&self) {
        while let Some(interrupt) = plic::next_pending() {
            match interrupt {
                UART0_TX_WATERMARK..=UART0_RX_PARITY_ERR => uart::UART0.handle_interrupt(),
                _ => debug!("Pidx {}", interrupt),
            }
            plic::complete(interrupt);
        }
    }
}

impl<A: 'static + Alarm<'static>> kernel::Chip for Matcha<A> {
    type MPU = PMP;
    type UserspaceKernelBoundary = SysCall;
    type SchedulerTimer = kernel::VirtualSchedulerTimer<A>;
    type WatchDog = ();

    fn mpu(&self) -> &Self::MPU {
        &self.pmp
    }

    fn scheduler_timer(&self) -> &Self::SchedulerTimer {
        &self.scheduler_timer
    }

    fn watchdog(&self) -> &Self::WatchDog {
        &()
    }

    fn userspace_kernel_boundary(&self) -> &SysCall {
        &self.userspace_kernel_boundary
    }

    fn service_pending_interrupts(&self) {
        loop {
            let mip = CSR.mip.extract();

            if mip.is_set(mip::mtimer) {
                unsafe {
                    timer::TIMER.service_interrupt();
                }
            }
            if mip.is_set(mip::mext) {
                unsafe {
                    self.handle_plic_interrupts();
                }
            }

            if !mip.matches_any(mip::mext::SET + mip::mtimer::SET) {
                break;
            }
        }

        // Re-enable all MIE interrupts that we care about. Since we looped
        // until we handled them all, we can re-enable all of them.
        CSR.mie.modify(mie::mext::SET + mie::mtimer::SET);
    }

    fn has_pending_interrupts(&self) -> bool {
        let mip = CSR.mip.extract();
        mip.matches_any(mip::mext::SET + mip::mtimer::SET)
    }

    fn sleep(&self) {
        unsafe {
            //pwrmgr::PWRMGR.enable_low_power();
            //self.check_until_true_or_interrupt(|| pwrmgr::PWRMGR.check_clock_propagation(), None);
            rv32i::support::wfi();
        }
    }

    unsafe fn atomic<F, R>(&self, f: F) -> R
    where
        F: FnOnce() -> R,
    {
        rv32i::support::atomic(f)
    }

    unsafe fn print_state(&self, writer: &mut dyn Write) {
        let _ = writer.write_fmt(format_args!(
            "\r\n---| Matcha configuration for {} |---",
            crate::chip::CHIP_NAME
        ));
        rv32i::print_riscv_state(writer);
    }
}

fn handle_exception(exception: mcause::Exception) {
    match exception {
        mcause::Exception::UserEnvCall | mcause::Exception::SupervisorEnvCall => (),

        mcause::Exception::InstructionMisaligned
        | mcause::Exception::InstructionFault
        | mcause::Exception::IllegalInstruction
        | mcause::Exception::Breakpoint
        | mcause::Exception::LoadMisaligned
        | mcause::Exception::LoadFault
        | mcause::Exception::StoreMisaligned
        | mcause::Exception::StoreFault
        | mcause::Exception::MachineEnvCall
        | mcause::Exception::InstructionPageFault
        | mcause::Exception::LoadPageFault
        | mcause::Exception::StorePageFault
        | mcause::Exception::Unknown => {
            panic!("fatal exception");
        }
    }
}

unsafe fn handle_interrupt(intr: mcause::Interrupt) {
    match intr {
        mcause::Interrupt::UserSoft
        | mcause::Interrupt::UserTimer
        | mcause::Interrupt::UserExternal => {
            panic!("unexpected user-mode interrupt");
        }
        mcause::Interrupt::SupervisorExternal
        | mcause::Interrupt::SupervisorTimer
        | mcause::Interrupt::SupervisorSoft => {
            panic!("unexpected supervisor-mode interrupt");
        }

        mcause::Interrupt::MachineSoft => {
            CSR.mie.modify(mie::msoft::CLEAR);
        }
        mcause::Interrupt::MachineTimer => {
            CSR.mie.modify(mie::mtimer::CLEAR);
        }
        mcause::Interrupt::MachineExternal => {
            CSR.mie.modify(mie::mext::CLEAR);
        }

        mcause::Interrupt::Unknown => {
            panic!("interrupt of unknown cause");
        }
    }
}

/// Trap handler for board/chip specific code.
///
/// For the Ibex this gets called when an interrupt occurs while the chip is
/// in kernel mode. All we need to do is check which interrupt occurred and
/// disable it.
#[export_name = "_start_trap_rust"]
pub unsafe extern "C" fn start_trap_rust() {
    match mcause::Trap::from(CSR.mcause.extract()) {
        mcause::Trap::Interrupt(interrupt) => {
            handle_interrupt(interrupt);
        }
        mcause::Trap::Exception(exception) => {
            handle_exception(exception);
        }
    }
}

/// Function that gets called if an interrupt occurs while an app was running.
/// mcause is passed in, and this function should correctly handle disabling the
/// interrupt that fired so that it does not trigger again.
#[export_name = "_disable_interrupt_trap_handler"]
pub unsafe extern "C" fn disable_interrupt_trap_handler(mcause_val: u32) {
    match mcause::Trap::from(mcause_val) {
        mcause::Trap::Interrupt(interrupt) => {
            handle_interrupt(interrupt);
        }
        _ => {
            panic!("unexpected non-interrupt\n");
        }
    }
}

pub unsafe fn configure_trap_handler() {
    // The Ibex CPU does not support non-vectored trap entries.
    CSR.mtvec
        .write(mtvec::trap_addr.val(_start_trap_vectored as u32 >> 2) + mtvec::mode::Vectored)
}

// Mock implementation for crate tests that does not include the section
// specifier, as the test will not use our linker script, and the host
// compilation environment may not allow the section name.
#[cfg(not(any(target_arch = "riscv32", target_os = "none")))]
pub extern "C" fn _start_trap_vectored() {
    unsafe {
        unreachable_unchecked();
    }
}

#[cfg(all(target_arch = "riscv32", target_os = "none"))]
#[link_section = ".riscv.trap_vectored"]
#[export_name = "_start_trap_vectored"]
#[naked]
pub extern "C" fn _start_trap_vectored() -> ! {
    unsafe {
        // According to the Ibex user manual:
        // [NMI] has interrupt ID 31, i.e., it has the highest priority of all
        // interrupts and the core jumps to the trap-handler base address (in
        // mtvec) plus 0x7C to handle the NMI.
        //
        // Below are 32 (non-compressed) jumps to cover the entire possible
        // range of vectored traps.
        #[cfg(all(target_arch = "riscv32", target_os = "none"))]
        llvm_asm!("
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
            j _start_trap
        "
        :
        :
        :
        : "volatile");
        unreachable_unchecked()
    }
}