blob: 02bd00e5e28ffe90c38bffdb7df14cf9a353b4a8 [file] [log] [blame]
*** Settings ***
Suite Setup Setup
Suite Teardown Teardown
Test Setup Reset Emulation
Test Teardown Test Teardown
Resource ${RENODEKEYWORDS}
*** Variables ***
${LOG_TIMEOUT} 2
${ROOTDIR} ${CURDIR}/../..
${SCRIPT} sim/config/shodan.resc
${PROMPT} CANTRIP>
${UART5} sysbus.uart5
${MATCHA_BUNDLE_RELEASE} ${ROOTDIR}/out/matcha-bundle-release.elf
${CANTRIP_KERNEL_RELEASE} ${ROOTDIR}/out/cantrip/riscv32-unknown-elf/release/kernel/kernel.elf
${CANTRIP_ROOTSERVER_RELEASE} ${ROOTDIR}/out/cantrip/riscv32-unknown-elf/release/capdl-loader
${OUT_TMP} ${ROOTDIR}/out/tmp
${FLASH_TAR} out/ext_flash_release.tar
${CPIO} out/cantrip/riscv32-unknown-elf/release/ext_builtins.cpio
*** Keywords ***
Prepare Machine
Execute Command path set @${ROOTDIR}
Execute Command $tar=@${FLASH_TAR}
Execute Command $cpio=@${CPIO}
Execute Script ${SCRIPT}
# Add UART5 virtual time so we can check the machine execution time
Execute Command uart5-analyzer TimestampFormat Virtual
Execute Command cpu0 IsHalted false
Set Default Uart Timeout 10
Create Log Tester ${LOG_TIMEOUT}
Install App
[Arguments] ${app}
# UART analyzer is marked as transient so it needs to be set up at subtest.
Execute Command showAnalyzer "uart5-analyzer" ${UART5} Antmicro.Renode.Analyzers.LoggingUartAnalyzer
# Disable uart5 timestamp diff
Execute Command uart5-analyzer TimestampFormat None
Write Line To Uart install ${app}.app
Wait For Line on Uart Application "${app}" installed
Write Line To Uart start ${app}
Wait For Line On Uart Bundle "${app}" started
Uninstall App
[Arguments] ${app}
Write Line To Uart stop ${app}
Wait For Line On Uart Bundle "${app}" stopped
Write Line To Uart uninstall ${app}
Wait For Line On Uart Bundle "${app}" uninstalled
*** Test Cases ***
Prepare Flash Tarball
Run Process mkdir -p ${ROOTDIR}/out/tmp
Run Process ln -sfr ${MATCHA_BUNDLE_RELEASE} ${OUT_TMP}/matcha-tock-bundle
Run Process ln -sfr ${CANTRIP_KERNEL_RELEASE} ${OUT_TMP}/kernel
Run Process ln -sfr ${CANTRIP_ROOTSERVER_RELEASE} ${OUT_TMP}/capdl-loader
Run Process tar -C ${OUT_TMP} -cvhf ${ROOTDIR}/${FLASH_TAR} matcha-tock-bundle kernel capdl-loader
Provides flash-tarball
Test Shodan Boot
Requires flash-tarball
Prepare Machine
Start Emulation
Create Terminal Tester ${UART5}
Wait For Prompt On Uart ${PROMPT}
# The following commented lines would cause the test failed to be saved.
Provides shodan-bootup
Test Smoke Test
Requires shodan-bootup
# UART analyzer is marked as transient so it needs to be set up at subtest.
Execute Command showAnalyzer "uart5-analyzer" ${UART5} Antmicro.Renode.Analyzers.LoggingUartAnalyzer
# Add UART5 virtual time so we can check the machine execution time
Execute Command uart5-analyzer TimestampFormat Virtual
Write Line To Uart install mobilenet_v1_emitc_static.model
# Bundle ID needs to be retrieved at runtime
${l}= Wait For Line On Uart Model "([^"]+)" installed treatAsRegex=true
Write Line to Uart test_mlexecute anything ${l.groups[0]}
Wait For Prompt On Uart ${PROMPT}
Wait For LogEntry "main returned: ", 0
# Test timer
Write Line To Uart test_timer_blocking 10
Wait For LogEntry Timer completed.
Test C hello app (no SDK)
Requires shodan-bootup
Install App hello
Wait For Line On Uart I am a C app!
Wait For Line On Uart Done
Uninstall App hello
Test SDK keyval support (+SecurityCoordinator)
Requires shodan-bootup
Install App keyval
Wait For Line On Uart read(foo) failed as expected
Wait For Line On Uart write ok
Wait For Line On Uart read returned [49, 50, 51, 0
Wait For Line On Uart delete ok
Wait For Line On Uart delete ok (for missing key)
Uninstall App keyval
Test SDK log support
Requires shodan-bootup
Install App logtest
Wait For Line On Uart ping!
Wait For Line On Uart DONE
Uninstall App logtest
Test panic app
Requires shodan-bootup
Install App panic
Wait For Line On Uart Goodbye, cruel world
Uninstall App panic
Test SDK + TimerService (oneshot & periodic)
Requires shodan-bootup
Install App timer
Wait For Line On Uart sdk_timer_cancel returned Err(SDKInvalidTimer) with nothing running
Wait For Line On Uart sdk_timer_poll returned Ok(0) with nothing running
Wait For Line On Uart sdk_timer_oneshot returned Err(SDKNoSuchTimer) with an invalid timer id
# oneshot
Wait For Line On Uart Timer 0 started
Wait For Line On Uart Timer 0 completed
# periodic
Wait For Line On Uart Timer 1 started
Wait For Line On Uart Timer completed: mask 0b0010 ms 75
Wait For Line On Uart Timer completed: mask 0b0010 ms 150
# NB: 10 timer events
# NB: intentionally match "cancel"; the code has a typo so prints "canceld" :)
Wait For Line On Uart Timer 1 cancel
# 2x periodic with 2:1 durations
Wait For Line On Uart Timer 1 started
Wait For Line On Uart Timer 2 started
Wait For Line On Uart Timer completed: mask 0b0010 1 \ 1 2 \ 0
Wait For Line On Uart Timer completed: mask 0b0010 1 \ 2 2 \ 0
# NB: lots of timer events (2 timers running)
Wait For Line On Uart Timer completed: mask 0b0100 1 14 2 \ 7
Wait For Line On Uart Timer 2 cancel
Wait For Line On Uart Timer 1 cancel
Wait For Line On Uart DONE
Uninstall App timer
Test SDK + MlCoordinator (oneshot & periodic)
Requires shodan-bootup
# UART analyzer is marked as transient so it needs to be set up at subtest.
Execute Command showAnalyzer "uart5-analyzer" ${UART5} Antmicro.Renode.Analyzers.LoggingUartAnalyzer
# Add UART5 virtual time so we can check the machine execution time
Execute Command uart5-analyzer TimestampFormat Virtual
Write Line To Uart install mltest.app
Wait For Line On Uart Application "mltest" installed
Write Line To Uart install mobilenet_v1_emitc_static.model
Wait For Line On Uart Model "mobilenet_v1_emitc_static" installed
Write Line to Uart start mltest
Wait For Line On Uart sdk_model_oneshot(nonexistent) returned Err(SDKNoSuchModel) (as expected)
# start oneshot
Wait For Line On Uart mobilenet_v1_emitc_static started
Wait For LogEntry "main returned: ", 0
Wait For Line On Uart mobilenet_v1_emitc_static completed
# start periodic
Wait For Line On Uart Model mobilenet_v1_emitc_static started
# NB: 10 runs of the model
FOR ${i} IN RANGE 10
Wait For LogEntry "main returned: ", 0
Wait For Line On Uart Model completed: mask 0b0001
END
Wait For Line On Uart DONE
Write Line To Uart stop mltest
Wait For Line On Uart Bundle "mltest" stopped
Write Line To Uart uninstall mltest
Wait For Line On Uart Bundle "mltest" uninstalled
Write Line To Uart uninstall mobilenet_v1_emitc_static
Wait For Line On Uart Bundle "mobilenet_v1_emitc_static" uninstalled