// Copyright 2023 Google LLC
// Copyright lowRISC contributors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

//
// TOP Matcha configuration
{ name: "matcha",
  type: "top",

  /////////////////////////////////////////////////////////////
  // Seed for compile-time random constants                  //
  // NOTE: REPLACE THIS WITH A NEW VALUE BEFORE THE TAPEOUT  //
  /////////////////////////////////////////////////////////////
  rnd_cnst_seed: 4881560218908238235

  // 32-bit datawidth
  datawidth: "32",

  // Power information for the design
  power: {
    // Power domains supported by the design
    // Aon represents domain aon
    // 0 represents domain 0
    domains: ["Aon", "0"],

    // Default power domain used for the design
    default: "0"
  },

  // This is the clock data structure of the design.
  // The hier path refers to the clock reference path (struct / port)
  //   - The top/ext desgination follows the same scheme as inter-module
  // The src key indicates the raw clock sources in the design
  // The groups key indicates the various clock groupings in the design
  clocks: {

    hier_paths: {
      top: "clkmgr_aon_clocks.", // top level is a struct
      ext: "",                   // ext is a port of the clock name
      lpg: "clkmgr_aon_cg_en.",  // top level struct for alert lpg reset enables
    },

    // Clock Source attributes
    // name: Name of group.
    // aon:  Whether the clock is free running all the time.
    //       If it is, the clock is not hanlded by clkmgr.
    // freq: Absolute frequency of clk in Hz
    // ref: indicates the clock is used as a reference for measurement.
    srcs: [
      { name: "main", aon: "no",  freq: "96000000" }
      { name: "io",   aon: "no",  freq: "96000000" }
      { name: "usb",  aon: "no",  freq: "48000000" }
      { name: "aon",  aon: "yes", freq: "200000", ref: true}
      { name: "smc",  aon: "no",  freq: "96000000" }
      { name: "ml",   aon: "no",  freq: "96000000" }
      { name: "video",aon: "no",  freq: "96000000" }
      { name: "audio",aon: "no",  freq: "48000000" }  // TODO: Change to 12.288Mhz later to match ASIC
    ],

    // Derived clock source attributes
    // name: Name of group.
    // aon:  Whether the clock is free running all the time.
    //       If it is, the clock is not hanlded by clkmgr.
    // freq: Absolute frequency of clk in Hz
    // src:  From which clock source is the clock derived
    // div:  Ratio between derived clock and source clock
    derived_srcs: [
      { name: "io_div2", aon: "no", div: 2, src: "io", freq: "48000000" }
      { name: "io_div4", aon: "no", div: 4, src: "io", freq: "24000000" }
    ],

    // Clock Group attributes
    // name: name of group.
    //
    // src: The hierarchical source of the clock
    // "ext"  - clock is supplied from a port of the top module
    // "top"  - clock is supplied from a net inside the top module
    //
    // sw_cg: whether software is allowed to gate the clock
    // "no"   - software is not allowed to gate clocks
    // "yes"  - software is allowed to gate clocks
    // "hint" - software can provide a hint, and hw controls the rest
    //
    // unique: whether each module in the group can be separately gated
    //         if sw_cg is "no", this field has no meaning
    // "yes"  - each clock is individually controlled
    // "no"   - the group is controlled as one single unit
    //
    // The powerup and proc groups are unique.
    // The powerup group of clocks do not feed through the clock
    // controller as they manage clock controller behavior
    // The proc group is not peripheral, and directly hardwired

    groups: [
      // the powerup group is used exclusively by clk/pwr/rstmgr/pinmux
      { name: "ast",     src:"ext", sw_cg: "no"                   }
      { name: "powerup", src:"top", sw_cg: "no"                   }
      { name: "trans",   src:"top", sw_cg: "hint", unique: "yes", }
      { name: "infra",   src:"top", sw_cg: "no",                  }
      { name: "secure",  src:"top", sw_cg: "no"                   }
      { name: "peri",    src:"top", sw_cg: "yes",  unique: "no"   }
      { name: "timers",  src:"top", sw_cg: "no"                   }
    ],
  },

  // This is the reset data structure of the design.
  // The hier path refers to the reset reference path (struct / port)
  //   - The top/ext desgination follows the same scheme as inter-module
  // The node key represents all the known resets in the design
  resets: {

    hier_paths: {
      top: "rstmgr_aon_resets.", // top level is a struct
      ext: "",                   // ext is a port of the clock name
      lpg: "rstmgr_aon_rst_en.", // top level struct for alert lpg reset enables
    },

    // Reset node attributes
    // name: name of reset.
    //
    // gen: whether the reset is generated
    // true: it is a generated reset inside rstmgr
    // false: it is a hardwired design reset inside rstmgr (roots and por)
    // For non-generated resets, the parent / domain definitions have no meaning.
    //
    // type: the reset type [ext, top]
    // ext: the reset is coming in from the ports, external to matcha
    // int: the reset is only used inside rstmgr
    // top: the reset is output from rstmgr to top level struct
    //
    // parent: The parent reset
    // If type is "ext", there is no root, since it is external
    //
    // domains: The power domains of a particular reset
    // This is a list of of the supported power domains.
    // Valid values are Aon and (power domain)0 ~ (power domain)1.
    // If no value is supplied, the default is specified by the power configuration.
    //
    // clk:  related clock domain for synchronous release
    // If type is "por", there is not related clock, since it is
    // likely external or generated from a voltage comparator
    //
    nodes: [
      { name: "por_aon",        gen: false, type: "top",                    clk: "aon"     }
      { name: "lc_src",         gen: false, type: "int",                    clk: "io_div4" }
      { name: "sys_src",        gen: false, type: "int",                    clk: "io_div4" }
      { name: "por",            gen: true,  type: "top", parent: "por_aon", clk: "main"    }
      { name: "por_io",         gen: true,  type: "top", parent: "por_aon", clk: "io"      }
      { name: "por_io_div2",    gen: true , type: "top", parent: "por_aon", clk: "io_div2" }
      { name: "por_io_div4",    gen: true , type: "top", parent: "por_aon", clk: "io_div4" }
      { name: "por_usb",        gen: true , type: "top", parent: "por_aon", clk: "usb"     }
      { name: "por_smc",        gen: true,  type: "top", parent: "por_aon", clk: "smc"     }
      { name: "por_ml",         gen: true , type: "top", parent: "por_aon", clk: "ml"      }
      { name: "por_video",      gen: true , type: "top", parent: "por_aon", clk: "video"   }
      { name: "por_audio",      gen: true , type: "top", parent: "por_aon", clk: "audio"   }
      { name: "lc",             gen: true,  type: "top", parent: "lc_src",  clk: "main"    }
      { name: "lc_aon",         gen: true,  type: "top", parent: "lc_src",  clk: "aon"     }
      { name: "lc_io",          gen: true,  type: "top", parent: "lc_src",  clk: "io"      }
      { name: "lc_io_div2",     gen: true,  type: "top", parent: "lc_src",  clk: "io_div2" }
      { name: "lc_io_div4",     gen: true,  type: "top", parent: "lc_src",  clk: "io_div4" }
      { name: "lc_usb",         gen: true,  type: "top", parent: "lc_src",  clk: "usb"     }
      { name: "lc_smc",         gen: true,  type: "top", parent: "lc_src",  clk: "smc"     }
      { name: "lc_ml",          gen: true,  type: "top", parent: "lc_src",  clk: "ml"      }
      { name: "lc_video",       gen: true,  type: "top", parent: "lc_src",  clk: "video"   }
      { name: "lc_audio",       gen: true,  type: "top", parent: "lc_src",  clk: "audio"   }
      { name: "sys",            gen: true,  type: "top", parent: "sys_src", clk: "main"    }
      { name: "sys_io_div4",    gen: true,  type: "top", parent: "sys_src", clk: "io_div4" }
      { name: "spi_device",     gen: true,  type: "top", parent: "lc_src",  clk: "io_div4", sw: true }
      { name: "spi_host0",      gen: true,  type: "top", parent: "lc_src",  clk: "io",      sw: true }
      { name: "spi_host1",      gen: true,  type: "top", parent: "lc_src",  clk: "io",      sw: true }
      { name: "spi_host2",      gen: true,  type: "top", parent: "lc_src",  clk: "io",      sw: true }
      { name: "usb",            gen: true,  type: "top", parent: "lc_src",  clk: "usb",     sw: true }
      { name: "usb_aon",        gen: true,  type: "top", parent: "lc_src",  clk: "aon",     sw: true }
      { name: "i2c0",           gen: true,  type: "top", parent: "lc_src",  clk: "io_div4", sw: true },
      { name: "i2c1",           gen: true,  type: "top", parent: "lc_src",  clk: "io_div4", sw: true },
      { name: "i2c2",           gen: true,  type: "top", parent: "lc_src",  clk: "io_div4", sw: true },
      { name: "smc",            gen: true,  type: "top", parent: "lc_src",  clk: "smc",     sw: true },
      { name: "ml",             gen: true,  type: "top", parent: "lc_src",  clk: "ml",      sw: true },
      { name: "cam_i2c",        gen: true,  type: "top", parent: "lc_src",  clk: "io_div4", sw: true },
      { name: "video",          gen: true,  type: "top", parent: "lc_src",  clk: "video",   sw: true },
      { name: "audio",          gen: true,  type: "top", parent: "lc_src",  clk: "audio",   sw: true },
    ]
  }

  // Number of cores: used in rv_plic and timer
  num_cores: "2",

  // `module` defines the peripherals.
  // Details come from each modules' config file `ip.hjson`:
  // attr: There are a few types of modules supported
     //   normal(default): Normal, non-templated modules that will be instantiated
     //   templated:   These modules are templated and must be run through topgen
     //   ipgen:       These modules are the same as templated but use the new ipgen flow
     //   reggen_top:  These modules are not templated, but need to have reggen run
     //                because they live exclusively in hw/top_* (Matcha) instead of
     //                hw/ip_* (OpenTitan). These modules are also instantiated in the top level.
     //   reggen_only: Similar to reggen_top, but are not instantiated in the top level.
     // intr_to:
     //   smc:         These modules with this parameter will send interrupt to smc core.
     //   sec:         If not defined (or sec), the default interrupt target is security core.
  module: [
    { name: "uart0",    // instance name
      type: "uart",     // Must be matched to the ip name in `ip.hson` (_reg, _cfg permitted)
                        // and `hw/ip/{type}`

      // clock connections defines the port to top level clock connection
      // the ip.hjson will declare the clock port names
      // If none are defined at ip.hjson, clk_i is used by default
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      // reset connections defines the port to top level reset connection
      // the ip.hjson will declare the reset port names
      // If none are defined at ip.hjson, rst_ni is used by default
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x40000000",
    },
    { name: "uart1",    // instance name
      type: "uart",     // Must be matched to the ip name in `ip.hson` (_reg, _cfg permitted)
                        // and `hw/ip/{type}`

      // clock connections defines the port to top level clock connection
      // the ip.hjson will declare the clock port names
      // If none are defined at ip.hjson, clk_i is used by default
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      // reset connections defines the port to top level reset connection
      // the ip.hjson will declare the reset port names
      // If none are defined at ip.hjson, rst_ni is used by default
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x40010000",
    },
    { name: "uart2",    // instance name
      type: "uart",     // Must be matched to the ip name in `ip.hson` (_reg, _cfg permitted)
                        // and `hw/ip/{type}`

      // clock connections defines the port to top level clock connection
      // the ip.hjson will declare the clock port names
      // If none are defined at ip.hjson, clk_i is used by default
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      // reset connections defines the port to top level reset connection
      // the ip.hjson will declare the reset port names
      // If none are defined at ip.hjson, rst_ni is used by default
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x40020000",
    },
    { name: "uart3",    // instance name
      type: "uart",     // Must be matched to the ip name in `ip.hson` (_reg, _cfg permitted)
                        // and `hw/ip/{type}`

      // clock connections defines the port to top level clock connection
      // the ip.hjson will declare the clock port names
      // If none are defined at ip.hjson, clk_i is used by default
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      // reset connections defines the port to top level reset connection
      // the ip.hjson will declare the reset port names
      // If none are defined at ip.hjson, rst_ni is used by default
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x40030000",
    },
    { name: "gpio",
      type: "gpio",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x40040000",
      param_decl: {
        GpioAsyncOn: "1"
      }
    }
    { name: "spi_device",
      type: "spi_device",
      clock_srcs: {clk_i: "io_div4", scan_clk_i: "io_div2"},
      clock_group: "peri",
      reset_connections: {rst_ni: "spi_device"},
      base_addr: "0x40050000",
    },
    { name: "i2c0",
      type: "i2c",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "i2c0"},
      base_addr: "0x40080000",
    },
    { name: "i2c1",
      type: "i2c",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "i2c1"},
      base_addr: "0x40090000",
    },
    { name: "i2c2",
      type: "i2c",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "i2c2"},
      base_addr: "0x400A0000",
    },
    { name: "pattgen",
      type: "pattgen",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x400E0000",
    },
    { name: "rv_timer",
      type: "rv_timer",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "timers",
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x40100000",
    },
    { name: "otp_ctrl",
      type: "otp_ctrl",
      clock_srcs: {clk_i: "io_div4", clk_edn_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc_io_div4", rst_edn_ni: "lc"},
      base_addrs: {core: "0x40130000", prim: "0x40132000"}
    },
    { name: "lc_ctrl",
      type: "lc_ctrl",
      clock_srcs: {clk_i: "io_div4", clk_kmac_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc_io_div4", rst_kmac_ni: "lc"},
      base_addr: "0x40140000",
      param_decl: {
        ChipGen: "16'h 0000",
        ChipRev: "16'h 0000",
        IdcodeValue: "jtag_id_pkg::JTAG_IDCODE",
      },
    },
    { name: "alert_handler",
      type: "alert_handler",
      clock_srcs: {clk_i: "io_div4", clk_edn_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc_io_div4", rst_edn_ni: "lc"},
      base_addr: "0x40150000",
      attr: "ipgen",
    },
    { name: "spi_host0",
      type: "spi_host",
      clock_srcs: {clk_i: "io"},
      clock_group: "peri",
      reset_connections: {rst_ni: "spi_host0"},
      base_addr: "0x40300000",
    },
    { name: "spi_host1",
      type: "spi_host",
      clock_srcs: {clk_i: "io"},
      clock_group: "peri",
      reset_connections: {rst_ni: "spi_host1"},
      base_addr: "0x40310000",
    },
    { name: "usbdev",
      type: "usbdev",
      clock_srcs: {clk_i: "usb", clk_aon_i: "aon"},
      clock_group: "peri",
      reset_connections: {rst_ni: "usb", rst_aon_ni: "usb_aon"},
      base_addr: "0x40320000",
      param_decl: {
        RcvrWakeTimeUs: "100"
      },
    },
    { name: "pwrmgr_aon",
      type: "pwrmgr",
      clock_group: "powerup",
      clock_srcs: {
        clk_i: "io_div4",
        clk_slow_i: "aon",
        clk_lc_i: "io_div4",
        clk_esc_i: {
          clock: "io_div4",
          group: "secure"
        }
      },
      reset_connections: {
        rst_ni: {
          name: "por_io_div4",
          domain: "Aon"
        },
        rst_main_ni: {
          name: "por_aon",
          domain: "0"
        },
        rst_lc_ni: {
          name: "lc_io_div4",
          domain: "Aon"
        },
        rst_esc_ni: {
          name: "lc_io_div4",
          domain: "Aon"
        },
        rst_slow_ni: {
          name: "por_aon",
          domain: "Aon",
        },
      }
      domain: ["Aon", "0"],
      base_addr: "0x40400000",
      attr: "templated",

    },
    { name: "rstmgr_aon",
      type: "rstmgr",
      clock_srcs: {
        clk_i: {
          clock: "io_div4",
          group: "powerup"
        },
        clk_por_i: "io_div4", clk_aon_i: "aon", clk_main_i: "main", clk_io_i: "io", clk_usb_i: "usb",
        clk_io_div2_i: "io_div2", clk_io_div4_i: "io_div4",
        clk_smc_i: "smc", clk_ml_i: "ml", clk_video_i: "video", clk_audio_i: "audio"
      },
      clock_group: "powerup",
      reset_connections: {
        rst_ni: {
          name: "lc_io_div4",
          domain: "Aon"
        },
        rst_por_ni: {
          name: "por_io_div4",
          domain: "Aon"
        },
      }
      domain: ["Aon", "0"],
      base_addr: "0x40410000",
      attr: "templated",
    },
    { name: "clkmgr_aon",
      type: "clkmgr",
      clock_srcs: {
        clk_i: "io_div4",
        clk_main_i: {
          group: "ast",
          clock: "main"
        },
        clk_io_i: {
          group: "ast",
          clock: "io"
        },
        clk_usb_i: {
          group: "ast",
          clock: "usb"
        },
        clk_aon_i: {
          group: "ast",
          clock: "aon"
        },
        clk_ml_i: {
          group: "ast",
          clock: "ml"
        },
        clk_smc_i: {
          group: "ast",
          clock: "smc"
        },
        clk_video_i: {
          group: "ast",
          clock: "video"
        },
        clk_audio_i: {
          group: "ast",
          clock: "audio"
        }
      },
      clock_group: "powerup",
      reset_connections: {rst_ni: "lc_io_div4",
                          rst_aon_ni: "lc_aon"
                          rst_io_ni: "lc_io",
                          rst_io_div2_ni: "lc_io_div2",
                          rst_io_div4_ni: "lc_io_div4",
                          rst_main_ni: "lc",
                          rst_usb_ni: "lc_usb",
                          rst_smc_ni: "lc_smc",
                          rst_ml_ni: "lc_ml",
                          rst_video_ni: "lc_video",
                          rst_audio_ni: "lc_audio",
                          rst_root_ni: "por_io_div4",
                          rst_root_io_ni: "por_io",
                          rst_root_io_div2_ni: "por_io_div2",
                          rst_root_io_div4_ni: "por_io_div4",
                          rst_root_main_ni: "por",
                          rst_root_usb_ni: "por_usb",
                          rst_root_smc_ni: "por_smc",
                          rst_root_ml_ni: "por_ml",
                          rst_root_video_ni: "por_video",
                          rst_root_audio_ni: "por_audio",
                         },
      domain: ["Aon"],
      base_addr: "0x40420000",
      attr: "templated",
    },
    { name: "sysrst_ctrl_aon",
      type: "sysrst_ctrl",
      clock_srcs: {clk_i: "io_div4", clk_aon_i: "aon"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc_io_div4", rst_aon_ni: "lc_aon"},
      domain: ["Aon"],
      base_addr: "0x40430000"
    },
    { name: "adc_ctrl_aon",
      type: "adc_ctrl",
      clock_srcs: {clk_i: "io_div4", clk_aon_i: "aon"},
      clock_group: "peri",
      reset_connections: {rst_ni: "lc_io_div4", rst_aon_ni: "lc_aon"},
      domain: ["Aon"],
      base_addr: "0x40440000"
    },
    { name: "pwm_aon",
      type: "pwm",
      clock_srcs: {clk_i: "io_div4", clk_core_i: "aon"},
      clock_group: "peri",
      reset_connections: {rst_ni: "lc_io_div4", rst_core_ni: "lc_aon"},
      domain: ["Aon"],
      base_addr: "0x40450000",
    },
    { name: "pinmux_aon",
      type: "pinmux",
      clock_srcs: {clk_i: "io_div4", clk_aon_i: "aon"},
      clock_group: "powerup",
      reset_connections: {rst_ni: "lc_io_div4",
                          rst_aon_ni: "lc_aon",
                          rst_sys_ni: "sys_io_div4"
                         },
      domain: ["Aon"],
      base_addr: "0x40460000",
      attr: "templated",
    },
    { name: "aon_timer_aon",
      type: "aon_timer",
      clock_srcs: {clk_i: "io_div4", clk_aon_i: "aon"},
      clock_group: "timers",
      reset_connections: {rst_ni: "lc_io_div4", rst_aon_ni: "lc_aon"},
      domain: ["Aon"],
      base_addr: "0x40470000",
    },
    { name: "ast",
      type: "ast",
      clock_srcs: {
        clk_ast_tlul_i: {
          clock: "io_div4",
          group: "infra"
        },
        clk_ast_adc_i: {
          clock: "aon",
          group: "peri"
        },
        clk_ast_alert_i: {
          clock: "io_div4",
          group: "secure"
        }
        clk_ast_es_i: {
          clock: "main",
          group: "secure"
        }
        clk_ast_rng_i: {
          clock: "main",
          group: "secure"
        }
        clk_ast_usb_i: {
          clock: "usb",
          group: "peri"
        }
      },
      clock_group: "secure",
      reset_connections: {
        rst_ast_tlul_ni: {
          name: "lc_io_div4",
          domain: "0",
        }
        rst_ast_adc_ni: {
          name: "lc_aon",
          domain: "Aon"
        },
        rst_ast_alert_ni: {
          name: "lc_io_div4",
          domain: "0",
        },
        rst_ast_es_ni: {
          name: "lc",
          domain: "0",
        },
        rst_ast_rng_ni: {
          name: "lc",
          domain: "0",
        },
        rst_ast_usb_ni: {
          name: "usb",
          domain: "0"
        }
      },
      domain: ["Aon", "0"],
      base_addr: "0x40480000",
      attr: "reggen_only",
    },
    { name: "sensor_ctrl",
      type: "sensor_ctrl",
      clock_srcs: {clk_i: "io_div4", clk_aon_i: "aon"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc_io_div4", rst_aon_ni: "lc_aon"},
      domain: ["Aon"],
      base_addr: "0x40490000",
      attr: "reggen_top",
    },
    { name: "sram_ctrl_ret_aon",
      type: "sram_ctrl",
      clock_srcs: {clk_i: "io_div4", clk_otp_i: "io_div4"},
      clock_group: "infra",
      reset_connections: {rst_ni: "lc_io_div4", rst_otp_ni: "lc_io_div4"}
      domain: ["Aon"],
      param_decl: {
        InstrExec: "0",
      }
      base_addrs: {regs: "0x40500000", ram: "0x40600000"},
      // Memory regions must be associated with a dedicated
      // TL-UL device interface.
      memory: {
        ram: {
          label:    "ram_ret_aon",
          swaccess:   "rw",
          data_intg_passthru: "true",
          exec:       "True",
          byte_write: "True",
          size:     "0x1000"
        }
      }
    },
    { name: "flash_ctrl",
      type: "flash_ctrl",
      clock_srcs: {clk_i: "main", clk_otp_i: "io_div4"},
      clock_group: "infra",
      reset_connections: {rst_ni: "lc", rst_otp_ni: "lc_io_div4"},
      base_addrs: {core: "0x41000000", prim: "0x41008000", mem: "0x20000000"}
      param_decl: {
        ProgFifoDepth: "4",
      }
      memory: {
        mem: {
          label:      "eflash",
          swaccess:   "ro",
          data_intg_passthru: "true",
          exec:       "True",
          byte_write: "False",
          config: {
            type: "flash",
            banks: 2,
            pages_per_bank: 256,
            program_resolution: 8, // maximum number of flash words allowed to program at one time
          }
        }
      }
      attr: "templated",
    },
    { name: "rv_dm",
      type: "rv_dm",
      clock_srcs: {clk_i: "main"},
      clock_group: "infra",
      reset_connections: {rst_ni: "sys"},
      param_decl: {
        IdcodeValue: "jtag_id_pkg::JTAG_IDCODE",
      }
      // Note that this module also contains a bus host.
      base_addrs: {mem: "0x00004000", regs: "0x00006000"}
    },
    { name: "rv_plic",
      type: "rv_plic",
      clock_srcs: {clk_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x48000000",
      attr: "ipgen",
    },
    { name: "aes",
      type: "aes",
      clock_srcs: {clk_i: "main", clk_edn_i: "main"},
      clock_group: "trans",
      reset_connections: {rst_ni: "lc", rst_edn_ni: "lc"},
      param_decl: {
        SecMasking: "1",
        SecSBoxImpl: "aes_pkg::SBoxImplDom"
      }
      base_addr: "0x41100000",
    },
    { name: "hmac",
      type: "hmac",
      clock_srcs: {clk_i: "main"},
      clock_group: "trans",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x41110000",
    },
    { name: "kmac",
      type: "kmac",
      param_decl: {
        EnMasking: "1",
      }
      clock_srcs: {clk_i: "main", clk_edn_i: "main"}
      clock_group: "trans"
      reset_connections: {rst_ni: "lc", rst_edn_ni: "lc"}
      base_addr: "0x41120000"
    },
    { name: "otbn",
      type: "otbn",
      clock_srcs: {
        clk_i: {
          clock: "main",
          group: "trans"
        },
        clk_edn_i: {
          clock: "main",
          group: "secure"
        },
        clk_otp_i: {
          clock: "io_div4",
          group: "secure"
        },
      },
      clock_group: "trans",
      reset_connections: {rst_ni: "lc", rst_edn_ni: "lc", rst_otp_ni: "lc_io_div4"},
      base_addr: "0x41130000",
    },
    { name: "keymgr",
      type: "keymgr",
      clock_srcs: {clk_i: "main", clk_edn_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc", rst_edn_ni: "lc"},
      base_addr: "0x41140000",
    },
    { name: "csrng",
      type: "csrng",
      clock_srcs: {clk_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x41150000",
    },
    { name: "entropy_src",
      type: "entropy_src",
      clock_srcs: {clk_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x41160000",
    },
    { name: "edn0",
      type: "edn",
      clock_srcs: {clk_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x41170000",
    },
    { name: "edn1",
      type: "edn",
      clock_srcs: {clk_i: "main"},
      clock_group: "secure",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x41180000",
    },
    { name: "sram_ctrl_main",
      type: "sram_ctrl",
      clock_srcs: {clk_i: "main", clk_otp_i: "io_div4"},
      clock_group: "infra",
      reset_connections: {rst_ni: "lc", rst_otp_ni: "lc_io_div4"},
      param_decl: {
        InstrExec: "1",
      }
      base_addrs: {regs: "0x411C0000", ram: "0x10000000"},
      // Memory regions must be associated with a dedicated
      // TL-UL device interface.
      memory: {
        ram: {
          label:      "ram_main",
          swaccess:   "rw",
          data_intg_passthru: "true",
          exec:       "True",
          byte_write: "True",
          size:       "0x20000"
        }
      }
    },
    { name: "rom_ctrl",
      type: "rom_ctrl",
      clock_srcs: {clk_i: "main"},
      clock_group: "infra",
      reset_connections: {rst_ni: "lc"},
      base_addrs: {rom: "0x00008000", regs: "0x411e0000"}
      memory: {
        rom: {
          label:              "rom",
          swaccess:           "ro",
          data_intg_passthru: "true",
          exec:               "True",
          byte_write:         "False",
          size:               "0x8000"
          data_intg_passthru: "True"
        }
      },
      param_decl: {
        SecDisableScrambling: "1'b0"
      }
    },
    { name: "rv_core_ibex_sec",
      type: "rv_core_ibex",
      param_decl: {PMPEnable: "1",
                   PMPGranularity: "0",
                   PMPNumRegions: "16",
                   MHPMCounterNum: "10",
                   MHPMCounterWidth: "32",
                   RV32E: "0",
                   RV32M: "ibex_pkg::RV32MSingleCycle",
                   RV32B: "ibex_pkg::RV32BOTEarlGrey",
                   RegFile: "ibex_pkg::RegFileFF",
                   BranchTargetALU: "1",
                   WritebackStage: "1",
                   ICache: "1",
                   ICacheECC: "1",
                   ICacheScramble: "1",
                   BranchPredictor: "0",
                   DbgTriggerEn: "1",
                   DbgHwBreakNum: "4",
                   SecureIbex: "1",
                   DmHaltAddr: "tl_main_pkg::ADDR_SPACE_DBG + dm::HaltAddress[31:0]",
                   DmExceptionAddr: "tl_main_pkg::ADDR_SPACE_DBG + dm::ExceptionAddress[31:0]",
                   PipeLine: "0"
                  },
      clock_srcs: {
        clk_i: "main",
        clk_edn_i: "main",
        clk_esc_i: {
          clock: "io_div4",
          group: "secure",
        }
        clk_otp_i: {
          clock: "io_div4",
          group: "secure",
        }
      },
      clock_group: "infra",
      reset_connections: {rst_ni: "lc",
                          rst_edn_ni: "lc",
                          rst_esc_ni: "lc_io_div4",
                          rst_otp_ni: "lc_io_div4"},
      base_addr: "0x411F0000",
    },
    {
      name: "dma0",
      type: "dma",
      clock_srcs: {clk_i: "main"},
      clock_group: "infra",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x40200000",
      attr: "reggen_top",
    },


    // Modules for SMC complex
    { name: "smc_uart",
      type: "uart",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x54000000",
      intr_to: "smc",
    },
    { name: "rv_timer_smc",
      type: "rv_timer",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "timers",
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x54010000",
      intr_to: "smc",
    },
    { name: "smc_ctrl",
      type: "smc_ctrl",
      clock_srcs: {clk_i: "smc"},
      clock_group: "secure",
      reset_connections: {rst_ni: "smc"},
      base_addr: "0x54020000",
      attr: "reggen_top",
    },
    { name: "cam_i2c",
      type: "i2c",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "cam_i2c"},
      base_addr: "0x54040000",
      intr_to: "smc",
    },
    { name: "cam_ctrl",
      type: "cam_ctrl",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "lc_io_div4"},
      base_addr: "0x54050000",
      intr_to: "smc",
      attr: "reggen_top",
    },
    { name: "isp_wrapper",
      type: "isp_wrapper",
      clock_srcs: {clk_i: "video", clk_core_i: "video", clk_axi_i: "video"},
      clock_group: "peri",
      reset_connections: {rst_ni: "smc"}, // SW controlled reset
      base_addr: "0x54060000",
      attr: "reggen_top",
      intr_to: "smc",
    },
    {
      name: "dma_smc",
      type: "dma",
      clock_srcs: {clk_i: "smc"},
      clock_group: "infra",
      reset_connections: {rst_ni: "smc"},
      base_addr: "0x54070000",
      intr_to: "smc",
      attr: "reggen_top",
    },
    { name: "rv_plic_smc",
      type: "rv_plic_smc",
      clock_srcs: {clk_i: "smc"},
      clock_group: "infra",
      reset_connections: {rst_ni: "smc"},
      base_addr: "0x60000000",  //per smc.repl
      attr: "ipgen",
    },

    // Second tlul_mailbox module is only for reg, interrupt and tlul interface generation only.
    // There will be only one tlul_mailbox IP in top level RTL. In the toplevel.sv.tpl, the second
    // tlul_mailbox IP instantiation will be skipped.
    { name: "tlul_mailbox_sec",
      type: "tlul_mailbox",
      clock_srcs: {clk_i: "main"},
      clock_group: "infra",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x40800000",
      //size:     "0x1000",
      attr: "reggen_top",
    },
    { name: "tlul_mailbox_smc",
      type: "tlul_mailbox",
      clock_srcs: {clk_i: "main"}, // async fifo at xbar_smc side
      clock_group: "infra",
      reset_connections: {rst_ni: "lc"},
      base_addr: "0x540F1000",
      //size:     "0x1000",
      intr_to: "smc",
      attr: "reggen_top",
    },

    // ML/Vector Core
    { name: "ml_top",
      type: "ml_top",
      clock_srcs: {clk_i: "ml"},
      clock_group: "peri",
      reset_connections: {rst_ni: "ml"}, // SW controlled reset for whole ml_top.
      base_addrs: {
                   dmem: "0x5A000000",
                   core: "0x5C000000",
                  },
      // Memory regions must be associated with a dedicated
      // TL-UL device interface.
      memory: {
        dmem: {
            label:    "ram_ml_dmem",
            swaccess:   "rw",
            exec:       "True",
            byte_write: "True",
            size:     "0x400000"
          }
        }
      intr_to: "smc",
      attr: "reggen_top",
    },
    { name: "spi_host2",
      type: "spi_host",
      clock_srcs: {clk_i: "io"},
      clock_group: "peri",
      reset_connections: {rst_ni: "spi_host2"},
      base_addr: "0x54090000",
      intr_to: "smc",
    },
    { name: "rv_timer_smc2",
      type: "rv_timer",
      clock_srcs: {clk_i: "io_div4"},
      clock_group: "timers",
      reset_connections: {rst_ni: "sys_io_div4"},
      base_addr: "0x54011000",
      intr_to: "smc",
    },
    { name: "i2s0", // TODO: Waiting on audio clock to be ready. USB clk used temporarily.
      type: "i2s",
      clock_srcs: {clk_i: "io_div4", clk_audio_i: "audio"},
      clock_group: "peri",
      reset_connections: {rst_ni: "sys_io_div4"},
      base_addr: "0x54100000",
      intr_to: "smc",
      attr: "reggen_top",
    },
    { name: "rv_core_ibex_smc",
      type: "rv_core_smc",
      param_decl: {PMPEnable: "0",
                   PMPGranularity: "0",
                   PMPNumRegions: "16",
                   MHPMCounterNum: "10",
                   MHPMCounterWidth: "32",
                   RV32E: "0",
                   RV32M: "smc_pkg::RV32MSingleCycle",
                   RV32B: "smc_pkg::RV32BNone",
                   RV32A: "1",
                   RegFile: "smc_pkg::RegFileFF",
                   BranchTargetALU: "0",
                   WritebackStage: "0",
                   ICache: "0",
                   ICacheECC: "0",
                   BranchPredictor: "0",
                   DbgTriggerEn: "1",
                   SecureSmc: "0",
                   DmHaltAddr: "tl_main_pkg::ADDR_SPACE_DBG + dm::HaltAddress[31:0]",
                   DmExceptionAddr: "tl_main_pkg::ADDR_SPACE_DBG + dm::ExceptionAddress[31:0]",
                   PipeLine: "0",
                   ITLBEntries: "64",
                   DTLBEntries: "64",
                   ASIDWidth: "9"
                  },
      clock_srcs: {clk_i: "smc", clk_esc_i: "io_div4"},
      clock_group: "peri",
      reset_connections: {rst_ni: "smc", rst_esc_ni: "lc_io_div4"},
      base_addr: "0x54030000",
      attr: "reggen_top",
    },

  ]
  // Memories (ROM, RAM, eFlash) are defined at the top.
  // It utilizes the primitive cells but configurable
  // All memories wrapped up in relevant controllers
  // ram_smc returned to 4MB
  memory: [
    { name: "ram_smc",
      clock_srcs: {clk_i: "smc"},
      clock_group: "infra",
      reset_connections: {
        rst_ni:
        {
          name: "smc"
          domain: "0"
        }
      }
      type: "ram_1p",
      base_addr: "0x50000000",
      size: "0x400000",
      inter_signal_list: [
        { struct: "tl"
          package: "tlul_pkg"
          type: "req_rsp"
          act: "rsp"
          name: "tl"
        }
      ]
    },
  ],

  // The port data structure is not something that should be used liberally.
  // It is used specifically to assign special attributes to specific ports.
  // For example, this allows us to designate a port as part of inter-module
  // connections.
  port: [
    { name: "ast",
      inter_signal_list: [
        { struct: "edn",
          type: "req_rsp",
          name: "edn",
          // The activity direction for a port inter-signal is "opposite" of
          // what the external module actually needs.
          act:  "rsp",
          package: "edn_pkg",
        },

        { struct: "lc_tx",
          type: "uni",
          name: "lc_dft_en",
          // The activity direction for a port inter-signal is "opposite" of
          // what the external module actually needs.
          act:  "req",
          package: "lc_ctrl_pkg",
        },

        { struct:  "ram_1p_cfg",
          package: "prim_ram_1p_pkg",
          type:    "uni",
          name:    "ram_1p_cfg",
          // The activity direction for a port inter-signal is "opposite" of
          // what the external module actually needs.
          act:     "rcv"
        },

        { struct:  "ram_2p_cfg",
          package: "prim_ram_2p_pkg",
          type:    "uni",
          name:    "ram_2p_cfg",
          // The activity direction for a port inter-signal is "opposite" of
          // what the external module actually needs.
          act:     "rcv"
        },

        { struct:  "rom_cfg",
          package: "prim_rom_pkg",
          type:    "uni",
          name:    "rom_cfg",
          // The activity direction for a port inter-signal is "opposite" of
          // what the external module actually needs.
          act:     "rcv"
        }

        { struct: "ast_obs_ctrl",
          type: "uni",
          name: "obs_ctrl",
          // The activity direction for a port inter-signal is "opposite" of
          // what the external module actually needs.
          act:  "rcv",
          package: "ast_pkg",
        },
      ]
    },
  ]

  // Inter-module Connection.
  // format:
  //    requester: [ resp1, resp2, ... ],
  //
  //  the field and value should be module_inst.port_name
  //  e.g flash_ctrl0.flash: [flash_phy0.flash_ctrl]
  inter_module: {
    'connect': {
      'ast.obs_ctrl'            : ['flash_ctrl.obs_ctrl',
                                   'otp_ctrl.obs_ctrl']
      'ast.ram_1p_cfg'          : ['otbn.ram_cfg',
                                   'sram_ctrl_main.cfg',
                                   'sram_ctrl_ret_aon.cfg',
                                   'rv_core_ibex_sec.ram_cfg',
                                   'rv_core_ibex_smc.ram_cfg'],
      'ast.ram_2p_cfg'          : ['spi_device.ram_cfg', 'usbdev.ram_cfg'],
      'ast.rom_cfg'             : ['rom_ctrl.rom_cfg'],
      'alert_handler.crashdump' : ['rstmgr_aon.alert_dump'],
      'alert_handler.esc_rx'    : ['rv_core_ibex_sec.esc_rx',
                                   'lc_ctrl.esc_scrap_state0_rx',
                                   'lc_ctrl.esc_scrap_state1_rx'
                                   'pwrmgr_aon.esc_rst_rx'],
      'alert_handler.esc_tx'    : ['rv_core_ibex_sec.esc_tx',
                                   'lc_ctrl.esc_scrap_state0_tx',
                                   'lc_ctrl.esc_scrap_state1_tx',
                                   'pwrmgr_aon.esc_rst_tx'],
      'aon_timer_aon.nmi_wdog_timer_bark' : ['rv_core_ibex_sec.nmi_wdog']
      'csrng.csrng_cmd'         : ['edn0.csrng_cmd', 'edn1.csrng_cmd'],
      'csrng.entropy_src_hw_if' : ['entropy_src.entropy_src_hw_if'],
      'csrng.cs_aes_halt'       : ['entropy_src.cs_aes_halt'],
      'flash_ctrl.keymgr'       : ['keymgr.flash'],
      'flash_ctrl.otp'          : ['otp_ctrl.flash_otp_key'],
      'flash_ctrl.rma_seed'     : ['lc_ctrl.lc_flash_rma_seed'],
      'otp_ctrl.sram_otp_key'   : ['sram_ctrl_main.sram_otp_key',
                                   'sram_ctrl_ret_aon.sram_otp_key',
                                   'rv_core_ibex_sec.icache_otp_key']
      'pwrmgr_aon.pwr_flash'    : ['flash_ctrl.pwrmgr'],
      'pwrmgr_aon.pwr_rst'      : ['rstmgr_aon.pwr'],
      'pwrmgr_aon.pwr_clk'      : ['clkmgr_aon.pwr'],
      'pwrmgr_aon.pwr_otp'      : ['otp_ctrl.pwr_otp'],
      'pwrmgr_aon.pwr_lc'       : ['lc_ctrl.pwr_lc'],
      'pwrmgr_aon.strap'        : ['pinmux_aon.strap_en'],
      'pwrmgr_aon.low_power'    : ['pinmux_aon.sleep_en',
                                   'aon_timer_aon.sleep_mode'],
      'pwrmgr_aon.fetch_en'     : ['rv_core_ibex_sec.pwrmgr_cpu_en'],
      'rom_ctrl.pwrmgr_data'    : ['pwrmgr_aon.rom_ctrl'],
      'rom_ctrl.keymgr_data'    : ['keymgr.rom_digest'],
      'flash_ctrl.keymgr'       : ['keymgr.flash'],
      'alert_handler.crashdump' : ['rstmgr_aon.alert_dump'],
      'csrng.entropy_src_hw_if' : ['entropy_src.entropy_src_hw_if'],

       // Daisy chained LC RMA req/ack interface: LC -> Flash -> OTBN -> LC
      'lc_ctrl.lc_flash_rma_req' : ['flash_ctrl.rma_req'],
      'flash_ctrl.rma_ack'       : ['otbn.lc_rma_req'],
      'otbn.lc_rma_ack'          : ['lc_ctrl.lc_flash_rma_ack'],

      // usbdev connection to pinmux
      'usbdev.usb_dp_pullup'      : ['pinmux_aon.usbdev_dppullup_en'],
      'usbdev.usb_dn_pullup'      : ['pinmux_aon.usbdev_dnpullup_en'],
      'usbdev.usb_aon_suspend_req': ['pinmux_aon.usbdev_suspend_req'],
      'usbdev.usb_aon_wake_ack'   : ['pinmux_aon.usbdev_wake_ack'],
      'usbdev.usb_aon_bus_reset'  : ['pinmux_aon.usbdev_bus_reset'],
      'usbdev.usb_aon_sense_lost' : ['pinmux_aon.usbdev_sense_lost'],
      'pinmux_aon.usbdev_wake_detect_active' : ['usbdev.usb_aon_wake_detect_active'],

      //isp_wrapper connection to ml_top
      'isp_wrapper.isp_cvalid'  : ['ml_top.isp_cvalid'],
      'isp_wrapper.isp_cready'  : ['ml_top.isp_cready'],
      'isp_wrapper.isp_cwrite'  : ['ml_top.isp_cwrite'],
      'isp_wrapper.isp_caddr'   : ['ml_top.isp_caddr'],
      'isp_wrapper.isp_wdata'   : ['ml_top.isp_wdata'],
      'isp_wrapper.isp_wmask'   : ['ml_top.isp_wmask'],

      'isp_wrapper.isp_sp_cvalid'  : ['ml_top.isp_sp_cvalid'],
      'isp_wrapper.isp_sp_cready'  : ['ml_top.isp_sp_cready'],
      'isp_wrapper.isp_sp_cwrite'  : ['ml_top.isp_sp_cwrite'],
      'isp_wrapper.isp_sp_caddr'   : ['ml_top.isp_sp_caddr'],
      'isp_wrapper.isp_sp_wdata'   : ['ml_top.isp_sp_wdata'],
      'isp_wrapper.isp_sp_wmask'   : ['ml_top.isp_sp_wmask'],

      // Edn connections
      'edn0.edn'              : ['keymgr.edn', 'otp_ctrl.edn', 'ast.edn', 'kmac.entropy',
                                 'alert_handler.edn', 'aes.edn', 'otbn.edn_urnd',
                                 'rv_core_ibex_sec.edn'],
      'edn1.edn'              : ['otbn.edn_rnd'],

      // OTBN OTP scramble key
      'otp_ctrl.otbn_otp_key' : ['otbn.otbn_otp_key'],

      // KeyMgr Sideload & KDF function
      'otp_ctrl.otp_keymgr_key' : ['keymgr.otp_key'],
      'keymgr.aes_key'          : ['aes.keymgr_key'],
      'keymgr.kmac_key'         : ['kmac.keymgr_key'],
      'keymgr.otbn_key'         : ['otbn.keymgr_key'],

      // KMAC Application Interface
      'kmac.app'                : ['keymgr.kmac_data',    // Keymgr needs to be at index 0
                                   'lc_ctrl.kmac_data',   // LC needs to be at index 1
                                   'rom_ctrl.kmac_data'], // ROM needs to be at index 2
      'kmac.en_masking'         : ['keymgr.kmac_en_masking']

      // The idle connection is automatically connected through topgen.
      // The user does not need to explicitly declare anything other than
      // an empty list.
      'clkmgr_aon.idle'         : [],

      // Pinmux JTAG signals
      'pinmux_aon.lc_jtag' : ['lc_ctrl.jtag'],
      'pinmux_aon.rv_jtag' : ['rv_dm.jtag'],
      // Latched HW debug life cycle signal that is forwarded to RV_DM
      'pinmux_aon.pinmux_hw_debug_en' : ['rv_dm.pinmux_hw_debug_en'],

      // OTP LC interface
      'otp_ctrl.otp_lc_data'       : ['lc_ctrl.otp_lc_data'],
      'lc_ctrl.lc_otp_program'     : ['otp_ctrl.lc_otp_program'],
      'lc_ctrl.lc_otp_vendor_test' : ['otp_ctrl.lc_otp_vendor_test'],

      // Diversification constant coming from life cycle
      'lc_ctrl.lc_keymgr_div'  : ['keymgr.lc_keymgr_div'],

      // LC function control signal broadcast
      'lc_ctrl.lc_dft_en'          : ['otp_ctrl.lc_dft_en',
                                      'pinmux_aon.lc_dft_en',
                                      'ast.lc_dft_en',
                                      'pwrmgr_aon.lc_dft_en',
                                     ],
      'lc_ctrl.lc_nvm_debug_en'    : ['flash_ctrl.lc_nvm_debug_en'],
      'lc_ctrl.lc_hw_debug_en'     : ['sram_ctrl_main.lc_hw_debug_en',
                                      'pinmux_aon.lc_hw_debug_en',
                                      'csrng.lc_hw_debug_en',
                                      'rv_dm.lc_hw_debug_en',
                                      'clkmgr_aon.lc_hw_debug_en',
                                      'pwrmgr_aon.lc_hw_debug_en',],
      'lc_ctrl.lc_cpu_en'          : ['rv_core_ibex_sec.lc_cpu_en',
                                      'rv_core_ibex_smc.lc_cpu_en'],
      'lc_ctrl.lc_keymgr_en'       : ['keymgr.lc_keymgr_en'],
      'lc_ctrl.lc_escalate_en'     : ['aes.lc_escalate_en',
                                      'kmac.lc_escalate_en',
                                      'otbn.lc_escalate_en',
                                      'otp_ctrl.lc_escalate_en',
                                      'sram_ctrl_main.lc_escalate_en',
                                      'sram_ctrl_ret_aon.lc_escalate_en',
                                      'aon_timer_aon.lc_escalate_en',
                                      'flash_ctrl.lc_escalate_en',
                                      'pinmux_aon.lc_escalate_en'],

      'lc_ctrl.lc_check_byp_en'    : ['otp_ctrl.lc_check_byp_en',
                                      'pinmux_aon.lc_check_byp_en'],
      'lc_ctrl.lc_clk_byp_req'     : ['clkmgr_aon.lc_clk_byp_req'],
      'lc_ctrl.lc_clk_byp_ack'     : ['clkmgr_aon.lc_clk_byp_ack'],

      // LC access control signal broadcast
      'lc_ctrl.lc_creator_seed_sw_rw_en'   : ['otp_ctrl.lc_creator_seed_sw_rw_en',
                                              'flash_ctrl.lc_creator_seed_sw_rw_en'],
      'lc_ctrl.lc_owner_seed_sw_rw_en'     : ['flash_ctrl.lc_owner_seed_sw_rw_en'],
      'lc_ctrl.lc_iso_part_sw_rd_en'       : ['flash_ctrl.lc_iso_part_sw_rd_en'],
      'lc_ctrl.lc_iso_part_sw_wr_en'       : ['flash_ctrl.lc_iso_part_sw_wr_en'],
      'lc_ctrl.lc_seed_hw_rd_en'           : ['otp_ctrl.lc_seed_hw_rd_en',
                                              'flash_ctrl.lc_seed_hw_rd_en'],

      // rv_plic connections
      'rv_plic.msip' : ['rv_core_ibex_sec.irq_software'],
      'rv_plic.irq'  : ['rv_core_ibex_sec.irq_external'],

      'rv_plic_smc.msip' : ['rv_core_ibex_smc.irq_software'],
      'rv_plic_smc.irq'  : ['rv_core_ibex_smc.irq_external'],

       'rv_dm.debug_req': ['rv_core_ibex_sec.debug_req', 'rv_core_ibex_smc.debug_req',
                            'ml_top.debug_req'],

      // rv_timer connections


      // rv core ibex connections
      'rv_core_ibex_sec.crash_dump'     : ['rstmgr_aon.cpu_dump'],
      'rv_core_ibex_sec.pwrmgr'         : ['pwrmgr_aon.pwr_cpu'],

      // smc core connections
      'rv_core_ibex_smc.pwrmgr_cpu_en'  : ['smc_ctrl.smc_boot_en'],

      // spi passthrough connection
      'spi_device.passthrough'     : ['spi_host0.passthrough']

      // Debug module reset request to power manager
      'rv_dm.ndmreset_req' : ['pwrmgr_aon.ndmreset_req'],

      // Reset manager software reset request to pwrmgr
      'rstmgr_aon.sw_rst_req' : ['pwrmgr_aon.sw_rst_req'],
    }

    // top is to connect to top net/struct.
    // It defines the signal in the top and connect from the module,
    // use of the signal is up to top template
    'top': [
        // top level net for clocks
        'clkmgr_aon.clocks',

        // top level clock gating indications for alert subsystem
        'clkmgr_aon.cg_en',

        // top level net for reset
        'rstmgr_aon.resets',

        // top level reset asserted indications for alert subsystem
        'rstmgr_aon.rst_en',

        // dedicated timer interrupt
        'rv_core_ibex_sec.irq_timer',
        'rv_core_ibex_smc.irq_timer',

        // hardwired connections
        'rv_core_ibex_sec.hart_id', 'rv_core_ibex_sec.boot_addr',
        'rv_core_ibex_smc.hart_id', 'rv_core_ibex_smc.boot_addr',

        // Xbars

        // Pinmux JTAG signals for the tool-inserted DFT TAP
        'pinmux_aon.dft_jtag',

        // OTP HW_CFG Broadcast signals.
        // TODO(#6713): The actual struct breakout and mapping currently needs to
        // be performed by hand in the toplevel template.
        'otp_ctrl.otp_hw_cfg',
        'csrng.otp_en_csrng_sw_app_read',
        'entropy_src.otp_en_entropy_src_fw_read',
        'entropy_src.otp_en_entropy_src_fw_over',
        'lc_ctrl.otp_device_id',
        'lc_ctrl.otp_manuf_state',
        'keymgr.otp_device_id',
        'sram_ctrl_main.otp_en_sram_ifetch',
    ],

    // ext is to create port in the top.
    'external': {
        'adc_ctrl_aon.adc'                : 'adc'
        'ast.edn'                         : '',
        'ast.lc_dft_en'                   : '',
        'ast.obs_ctrl'                    : 'obs_ctrl',
        'ast.ram_1p_cfg'                  : 'ram_1p_cfg',
        'ast.ram_2p_cfg'                  : 'ram_2p_cfg',
        'ast.rom_cfg'                     : 'rom_cfg',
        'clkmgr_aon.jitter_en'            : 'clk_main_jitter_en',
        'clkmgr_aon.io_clk_byp_req'       : 'io_clk_byp_req',
        'clkmgr_aon.io_clk_byp_ack'       : 'io_clk_byp_ack',
        'clkmgr_aon.all_clk_byp_req'      : 'all_clk_byp_req',
        'clkmgr_aon.all_clk_byp_ack'      : 'all_clk_byp_ack',
        'clkmgr_aon.hi_speed_sel'         : 'hi_speed_sel',
        'clkmgr_aon.div_step_down_req'    : 'div_step_down_req',
        'clkmgr_aon.calib_rdy'            : 'calib_rdy',
        'flash_ctrl.flash_bist_enable'    : 'flash_bist_enable',
        'flash_ctrl.flash_power_down_h'   : 'flash_power_down_h',
        'flash_ctrl.flash_power_ready_h'  : 'flash_power_ready_h',
        'flash_ctrl.flash_test_mode_a'    : 'flash_test_mode_a',
        'flash_ctrl.flash_test_voltage_h' : 'flash_test_voltage_h',
        'flash_ctrl.fla_obs'              : 'flash_obs',
        'entropy_src.entropy_src_rng'     : 'es_rng',
        'entropy_src.rng_fips'            : 'es_rng_fips',
        'peri.tl_ast'                     : 'ast_tl',
        'pinmux_aon.dft_strap_test'       : 'dft_strap_test'
        'pinmux_aon.dft_hold_tap_sel'     : 'dft_hold_tap_sel',
        'pinmux_aon.usb_dppullup_en'      : 'usb_dp_pullup_en',
        'pinmux_aon.usb_dnpullup_en'      : 'usb_dn_pullup_en',
        'pwrmgr_aon.pwr_ast'              : 'pwrmgr_ast',
        'otp_ctrl.otp_ast_pwr_seq'        : '',
        'otp_ctrl.otp_ast_pwr_seq_h'      : '',
        'otp_ctrl.otp_ext_voltage_h'      : 'otp_ext_voltage_h',
        'otp_ctrl.otp_obs'                : 'otp_obs',
        'rstmgr_aon.por_n'                : 'por_n',
        'rv_core_ibex_sec.fpga_info'      : 'fpga_info',
        'sensor_ctrl.ast_alert'           : 'sensor_ctrl_ast_alert',
        'sensor_ctrl.ast_status'          : 'sensor_ctrl_ast_status',
        'sensor_ctrl.ast2pinmux'          : 'ast2pinmux',
        'sensor_ctrl.ast_init_done'       : 'ast_init_done',
        'spi_device.sck_monitor'          : 'sck_monitor',
        'usbdev.usb_rx_d'                 : '',
        'usbdev.usb_tx_d'                 : '',
        'usbdev.usb_tx_se0'               : '',
        'usbdev.usb_tx_use_d_se0'         : '',
        'usbdev.usb_rx_enable'            : '',
        'usbdev.usb_ref_val'              : '',
        'usbdev.usb_ref_pulse'            : '',
    },
  },

  // Crossbars: having a top level crossbar
  // This version assumes all crossbars are instantiated at the top.
  // Assume xbar.hjson is located in the same directory of top.hjson
  xbar: [
    { name: "main",
      clock_srcs: {clk_main_i: "main",
                   clk_fixed_i: "io_div4",
                   clk_usb_i: "usb",
                   clk_spi_host0_i: "io",
                   clk_spi_host1_i: "io",
                   clk_smc_i:"smc"},
      clock_group: "infra",
      reset: "lc",
      reset_connections: {rst_main_ni: "lc",
                          rst_fixed_ni: "lc_io_div4",
                          rst_usb_ni: "lc_usb",
                          rst_spi_host0_ni: "lc_io",
                          rst_spi_host1_ni: "lc_io",
                          rst_smc_ni: "smc"}
    },
    { name: "peri",
      clock_srcs: {clk_peri_i: "io_div4", },
      clock_group: "infra",
      reset: "lc_io_div4",
      reset_connections: {rst_peri_ni: "lc_io_div4"},
    },
    { name: "smc",
      clock_srcs: {clk_smc_i: "smc",
                  clk_peri_i: "io_div4",
                  clk_spi_host2_i: "io",
                  clk_ml_i: "ml",
                  clk_video_i: "video",
                  clk_audio_i: "audio",
                  clk_main_i: "main",
                  },
      clock_group: "infra",
      reset: "lc",
      reset_connections: {rst_smc_ni:       "smc",
                          rst_peri_ni:      "lc_io_div4",
                          rst_spi_host2_ni: "lc_io",
                          rst_ml_ni:        "ml",
                          rst_video_ni:     "video",
                          rst_audio_ni:     "audio",
                          rst_main_ni:      "lc"
                         },
    },
    { name: "dbg",
      clock_srcs: {clk_main_i: "main", },
      clock_group: "infra",
      reset: "lc",
      reset_connections: {rst_main_ni: "lc"},
    },
  ],

  // ===== PINMUX & PINOUT ======================================================

  pinout: {
    // IO power bank declaration.
    // This list defines the IO bank power domains on the ASIC.
    // Each individual pad must be in one of the declared power domains.
    banks: ['VCC', 'AVCC', 'VIOA', 'VIOB'],
    // Pad declaration.
    // Each entry must have the following four keys:
    //
    // - name: Name of the pad (this will be exposed at the chiplevel).
    //
    // - type: Pad type (this maps to the pad types defined in prim_pad_wrapper_pkg.sv)
    //
    // - bank: Specifies in which of the IO power banks this pad lives.
    //
    // - connection: Can have either of the following values:
    //
    //               1) 'direct': This is a dedicated IO Pad that is directly connected to a peripheral.
    //
    //               2) 'manual': This is a dedicated IO signal that is not directly connected to a
    //                            peripheral. It needs to be manually wired up in the template.
    //
    //               3) 'muxed': This is a muxed IO pad that will be connected to the pinmux.
    //
    // Optionally, each pad can also have a 'desc' field for further description, and a 'port_type' field
    // to override the default 'inout wire' type (this is currently only used for simulating ADC connections
    // where the ports have to be switched to a real type when the ANALOGSIM macro is defined).
    pads: [
      // Special manually connected pads
      { name: 'POR_N'           , type: 'InputStd',     bank: 'VCC' , connection: 'manual', desc: 'System reset'},
      { name: 'USB_P'           , type: 'DualBidirTol', bank: 'VCC' , connection: 'manual', desc: 'USB P signal'},
      { name: 'USB_N'           , type: 'DualBidirTol', bank: 'VCC' , connection: 'manual', desc: 'USB N signal'},
      { name: 'CC1'             , type: 'InputStd',     bank: 'AVCC', connection: 'manual', desc: 'ADC input 1', port_type: '`INOUT_AI'},
      { name: 'CC2'             , type: 'InputStd',     bank: 'AVCC', connection: 'manual', desc: 'ADC input 2', port_type: '`INOUT_AI'},
      { name: 'FLASH_TEST_VOLT' , type: 'AnalogIn0',    bank: 'VCC' , connection: 'manual', desc: 'Flash test voltage input'},
      { name: 'FLASH_TEST_MODE0', type: 'InputStd',     bank: 'VCC' , connection: 'manual', desc: 'Flash test mode signal'},
      { name: 'FLASH_TEST_MODE1', type: 'InputStd',     bank: 'VCC' , connection: 'manual', desc: 'Flash test mode signal'},
      { name: 'OTP_EXT_VOLT'    , type: 'AnalogIn1',    bank: 'VCC' , connection: 'manual', desc: 'OTP external voltage input'},
      //{ name: 'CAM_SCL'         , type: 'BidirOd',      bank: 'VCC' , connection: 'manual', desc: 'CAM I2C Clock'},
      //{ name: 'CAM_SDA'         , type: 'BidirOd',      bank: 'VCC' , connection: 'manual', desc: 'CAM I2C Data'},
      // Dedicated IOs
      { name: 'SPI_HOST_D0'     , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host data'},
      { name: 'SPI_HOST_D1'     , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host data'},
      { name: 'SPI_HOST_D2'     , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host data'},
      { name: 'SPI_HOST_D3'     , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host data'},
      { name: 'SPI_HOST_CLK'    , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host clock'},
      { name: 'SPI_HOST_CS_L'   , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host chip select'},
      //{ name: 'SPI_HOST2_D0'     , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host data'},
      //{ name: 'SPI_HOST2_D1'     , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host data'},
      //{ name: 'SPI_HOST2_D2'     , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host data'},
      //{ name: 'SPI_HOST2_D3'     , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host data'},
      //{ name: 'SPI_HOST2_CLK'    , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host clock'},
      //{ name: 'SPI_HOST2_CS_L'   , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI host chip select'},
      { name: 'SPI_DEV_D0'      , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI device data'},
      { name: 'SPI_DEV_D1'      , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI device data'},
      { name: 'SPI_DEV_D2'      , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI device data'},
      { name: 'SPI_DEV_D3'      , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'SPI device data'},
      { name: 'SPI_DEV_CLK'     , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SPI device clock'},
      { name: 'SPI_DEV_CS_L'    , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SPI device chip select'},
      //{ name: 'ISP_DVP_PCLK'    , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR CLK'},
      //{ name: 'ISP_DVP_D0'      , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR DATA'},
      //{ name: 'ISP_DVP_D1'      , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR DATA'},
      //{ name: 'ISP_DVP_D2'      , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR DATA'},
      //{ name: 'ISP_DVP_D3'      , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR DATA'},
      //{ name: 'ISP_DVP_D4'      , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR DATA'},
      //{ name: 'ISP_DVP_D5'      , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR DATA'},
      //{ name: 'ISP_DVP_D6'      , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR DATA'},
      //{ name: 'ISP_DVP_D7'      , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR DATA'},
      //{ name: 'ISP_DVP_HSYNC'   , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR HSYNC'},
      //{ name: 'ISP_DVP_VSYNC'   , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'SENSOR VSYNC'},
      //{ name: 'CAM_TRIG'        , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'CAM trigger'},
      //{ name: 'CAM_INT'         , type: 'InputStd', bank: 'VIOA', connection: 'direct', desc: 'CAM Interrupt'},
			//{ name: 'I2S0_RX_SCLK'    , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'I2S rx host clock'},
      //{ name: 'I2S0_RX_WS'      , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'I2S rx host word select'},
      //{ name: 'I2S0_RX_SD'      , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'I2S rx serial data'},
      //{ name: 'I2S0_TX_SCLK'    , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'I2S tx host clock'},
      //{ name: 'I2S0_TX_WS'      , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'I2S tx host word select'},
      //{ name: 'I2S0_TX_SD'      , type: 'BidirStd', bank: 'VIOA', connection: 'direct', desc: 'I2S tx serial data'},

      // IOA
      { name: 'IOA0'            , type: 'BidirStd', bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOA1'            , type: 'BidirStd', bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOA2'            , type: 'BidirStd', bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad', port_type: '`INOUT_AO'},
      { name: 'IOA3'            , type: 'BidirStd', bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad', port_type: '`INOUT_AO'},
      { name: 'IOA4'            , type: 'BidirStd', bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOA5'            , type: 'BidirStd', bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOA6'            , type: 'BidirOd',  bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOA7'            , type: 'BidirOd',  bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOA8'            , type: 'BidirOd',  bank: 'VIOA', connection: 'muxed' , desc: 'Muxed IO pad'},
      // IOB
      { name: 'IOB0'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB1'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB2'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB3'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB4'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB5'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB6'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB7'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB8'            , type: 'BidirStd', bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB9'            , type: 'BidirOd' , bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB10'           , type: 'BidirOd' , bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB11'           , type: 'BidirOd' , bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOB12'           , type: 'BidirOd' , bank: 'VIOB', connection: 'muxed' , desc: 'Muxed IO pad'},
      // IOC
      { name: 'IOC0'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC1'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC2'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC3'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC4'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC5'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC6'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC7'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC8'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC9'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC10'           , type: 'BidirOd' , bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC11'           , type: 'BidirOd' , bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOC12'           , type: 'BidirOd' , bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      // IOR
      { name: 'IOR0'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR1'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR2'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR3'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR4'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR5'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR6'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR7'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR8'            , type: 'BidirOd' , bank: 'VCC' , connection: 'direct', desc: 'Dedicated sysrst_ctrl output (ec_rst_l)'},
      { name: 'IOR9'            , type: 'BidirOd' , bank: 'VCC' , connection: 'direct', desc: 'Dedicated sysrst_ctrl output (flash_wp_l)'},
      { name: 'IOR10'           , type: 'BidirOd' , bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR11'           , type: 'BidirOd' , bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR12'           , type: 'BidirOd' , bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOR13'           , type: 'BidirOd' , bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      // IOD
      { name: 'IOD0'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOD1'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOD2'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOD3'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOD4'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
      { name: 'IOD5'            , type: 'BidirStd', bank: 'VCC' , connection: 'muxed' , desc: 'Muxed IO pad'},
    ]
  }

  pinmux: {
    // Signal to pinmux/pad mapping.
    // Each entry in the list below must have the following two mandatory keys:
    //
    // - instance: This is the comportable IO instance name where the IO signal comes from.
    //
    // - connection: This key is similar to the connection key in the pinout/pad configuration and
    //               can have either of the following values:
    //
    //               1) 'direct': This is a dedicated IO signal that is directly connected to a pad.
    //                            Such an IO signal must also specify the 'port' and 'pad' keys
    //                            (see further below).
    //
    //               2) 'manual': This is a dedicated IO signal that is not directly connected to a pad.
    //                            It needs to be manually wired up in the template.
    //                            Such an IO signal may have a 'port' key, but no 'pad' key.
    //
    //               3) 'muxed': This is a muxed IO signal that will be connected to the pinmux.
    //                           Such an IO signal may have a 'port' key, but no 'pad' key.
    //
    // Depending on the connection type specified, each entry may have the following optional keys:
    //
    // - port: Name of the available IO signal of the instance.
    //         This is required for 'direct' connections, but optional for the others.
    //         Individual signals of a bus IO signal must be indexed with square brackets, e.g. mybus[1].
    //         Not specifying this key or setting it to an empty string acts as a wild card
    //         and includes all available IOs of this instance.
    //
    // - pad: Name of the pad the 'direct' connection should connect to.
    //        This is not required for 'muxed' and 'manual' connections.
    //
    // - desc: Optional description field.
    //
    // - attr: Manual direct IOs may specify an additional pad attr field.
    //         This is used to create the correct pad attribute CSR for that DIO channel (since the
    //         DIO is manual, there is no way to automatically infer the corresponding pad type).
    //
    signals: [
      // USB
      { instance: 'usbdev',          port: 'usb_dp',         connection: 'manual', pad: ''             , desc: ''},
      { instance: 'usbdev',          port: 'usb_dn',         connection: 'manual', pad: ''             , desc: ''},
      // SPI Host0
      { instance: 'spi_host0',       port: 'sck',            connection: 'direct', pad: 'SPI_HOST_CLK' , desc: ''},
      { instance: 'spi_host0',       port: 'csb',            connection: 'direct', pad: 'SPI_HOST_CS_L', desc: ''},
      { instance: 'spi_host0',       port: 'sd[0]',          connection: 'direct', pad: 'SPI_HOST_D0'  , desc: ''},
      { instance: 'spi_host0',       port: 'sd[1]',          connection: 'direct', pad: 'SPI_HOST_D1'  , desc: ''},
      { instance: 'spi_host0',       port: 'sd[2]',          connection: 'direct', pad: 'SPI_HOST_D2'  , desc: ''},
      { instance: 'spi_host0',       port: 'sd[3]',          connection: 'direct', pad: 'SPI_HOST_D3'  , desc: ''},
      // SPI Device
      { instance: 'spi_device',      port: 'sck',            connection: 'direct', pad: 'SPI_DEV_CLK'  , desc: ''},
      { instance: 'spi_device',      port: 'csb',            connection: 'direct', pad: 'SPI_DEV_CS_L' , desc: ''},
      { instance: 'spi_device',      port: 'sd[0]',          connection: 'direct', pad: 'SPI_DEV_D0'   , desc: ''},
      { instance: 'spi_device',      port: 'sd[1]',          connection: 'direct', pad: 'SPI_DEV_D1'   , desc: ''},
      { instance: 'spi_device',      port: 'sd[2]',          connection: 'direct', pad: 'SPI_DEV_D2'   , desc: ''},
      { instance: 'spi_device',      port: 'sd[3]',          connection: 'direct', pad: 'SPI_DEV_D3'   , desc: ''},

      // MIOs
      { instance: "gpio",            port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "uart0",           port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "uart1",           port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "uart2",           port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "smc_uart",        port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "i2c0",            port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "i2c1",            port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "i2c2",            port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "cam_i2c",         port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "cam_ctrl",        port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "isp_wrapper",     port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "i2s0",            port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "pattgen",         port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "spi_device",      port: 'tpm_csb',        connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "spi_host1",       port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "spi_host2",       port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "flash_ctrl",      port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sensor_ctrl",     port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "pwm_aon",         port: '',               connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "otp_ctrl",        port: 'test[0]',        connection: 'muxed' , pad: ''             , desc: ''},
      // Sysrst ctrl has both muxed and dedicated IOs
      { instance: "sysrst_ctrl_aon", port: 'ac_present',     connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'key0_in',        connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'key1_in',        connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'key2_in',        connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'pwrb_in',        connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'bat_disable',    connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'ec_rst_l',       connection: 'direct', pad: 'IOR8'         , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'flash_wp_l',     connection: 'direct', pad: 'IOR9'         , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'key0_out',       connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'key1_out',       connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'key2_out',       connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'pwrb_out',       connection: 'muxed',  pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'lid_open',       connection: 'muxed' , pad: ''             , desc: ''},
      { instance: "sysrst_ctrl_aon", port: 'z3_wakeup',      connection: 'muxed' , pad: ''             , desc: ''},
      { instance: 'usbdev',          port: 'sense',          connection: 'muxed' , pad: ''             , desc: ''},
    ],

    num_wkup_detect: 8
    wkup_cnt_width:  8
  }

  // Implementation targets.
  // This defines the configuration of the target-specific chip-levels  to
  // generate from the shared template. Each target uses the same base
  // configuration for the  pinmux and pinout as defined above, and the
  // generated software constants for the pinmux DIF do not change among the
  // implementation targets. However, in order to accommodate slight
  // differences among the ASIC, FPGA emulation and simulation environments,
  // it is possible to make very limited pinout changes below. In particular,
  // it is possible to remove and tie-off specific pads, or add more 'manual'
  // pads that need to be manually connected in the template. It is also possible
  // to override the JTAG and strap locations indices, since the testing and DFT
  // setups may differ among the targets.
  targets: [
    { name: 'asic',

      // Pinout Changes.
      pinout: {
        // This is a list of port names to remove from the chip port list.
        // The corresponding pad of a removed port will remain instantiated,
        // and a wire net will be declared inside the chip-level hierarchy so
        // that it can be manually connected as needed.
        remove_ports: [],

        // This is a list of pad names to remove from the base pinout defined
        // above. Removed pads will be stubbed off such that their inputs
        // signals are driven  with zero. Output signals and output enables
        // will be left unconnected. If no changes are needed, this list can
        // be left empty.
        remove_pads: [],

        // This is a list of additional "manual" pads to add to the pinout.
        // The pad entries have the same format as the pad entries in the pinout
        // configuration above. However, the 'connection' key must always be set
        // to 'manual' as it is not possible to connect these additional pads
        // to the pinmux or peripherals.
        add_pads: [
          { name: 'AST_MISC',  type: 'InputStd', bank: 'VCC', connection: 'manual', desc: 'Extra infrastructure pad for AST'}
          { name: 'CLK_EXT',   type: 'AnalogIn0', bank: 'VCC', connection: 'manual', desc: 'Ext clock input'}
          { name: 'CLK_BYP',   type: 'InputStd', bank: 'VCC', connection: 'manual', desc: 'Bypass internal clk from PLL, and use CLK_EXT for debug'}
          { name: 'CLK_200K',  type: 'AnalogIn0', bank: 'VCC', connection: 'manual', desc: 'Extra clock input for FPGA target'}
          { name: 'XTAL_IN',   type: 'AnalogIn0', bank: 'VCC', connection: 'manual', desc: 'XTAL input'}
          { name: 'XTAL_OUT',  type: 'AnalogIn0', bank: 'VCC', connection: 'manual', desc: 'XTAL output'}
        ],
      },

      pinmux: {
        // Special signal positions. Each entry in the list below creates a
        // target-specific pad position parameter in the  chiplevel hierarchy
        // that can be used to parameterize certain IPs like the pinmux or
        // padring. This is mainly used to define the pad positions of special
        // test and DFT signals such as the JTAG signals and the TAP and DFT
        // straps. Straps in this context are special pads that get sampled at
        // boot time during certain life cycle states in order to determine
        // DFT modes and the TAP mux selection index (the JTAG signals can be
        // muxed to either the lifecycle TAP, DFT TAP or RISC-V processor
        // TAP). TODO: add more documentation to https://docs.opentitan.org/hw/ip/pinmux/doc/index.html
        // Each entry must have the following two keys:
        //
        // - name: Basename for the SV parameter.
        //
        // - pad: The pad name that this special signal maps to. The generated
        //        parameter will be assigned the corresponding pad index.
        //
        // Each entry may have an optional 'desc' key for further description.
        special_signals: [
          // Straps
          { name: 'tap0',   pad: 'IOC8', desc: 'TAP strap signal.'  },
          { name: 'tap1',   pad: 'IOC5', desc: 'TAP strap signal.'  },
          { name: 'dft0',   pad: 'IOC3', desc: 'DFT strap signal.'  },
          { name: 'dft1',   pad: 'IOC4', desc: 'DFT strap signal.'  },
          // JTAG
          { name: 'tck',    pad: 'IOR3', desc: 'JTAG tck signal.'    },
          { name: 'tms',    pad: 'IOR0', desc: 'JTAG tms signal.'    },
          { name: 'trst_n', pad: 'IOR4', desc: 'JTAG trst_n signal.' },
          { name: 'tdi',    pad: 'IOR2', desc: 'JTAG tdi signal.'    },
          { name: 'tdo',    pad: 'IOR1', desc: 'JTAG tdo signal.'    },
        ],
      }
    },
    { name: 'nexus',

      pinout: {
        remove_ports: [],
        remove_pads: [
          'CC1', 'CC2',
          //'SPI_DEV_D2', 'SPI_DEV_D3'
          'FLASH_TEST_VOLT', 'OTP_EXT_VOLT'
          'FLASH_TEST_MODE0', 'FLASH_TEST_MODE1',
          //'IOB10', 'IOB11', 'IOB12',
          //'IOR5', 'IOR6', 'IOR7', 'IOR8', 'IOR9', 'IOR10', 'IOR11', 'IOR12', 'IOR13'
        ],

        add_pads: [
          // Additional infrastructure pads
          // IO_CLK and IO_CLK_N are using AnalogIO0 now to bypass the IBUF in he prim_xilinx_pad_wrapper.sv. It use the IBUFDS in
          // the clkgen_xilultrascaleplus.sv instead.
          { name: 'IO_CLK',           type: 'AnalogIn0', bank: 'VCC', connection: 'manual', desc: 'Extra clock input for FPGA target'}
          { name: 'IO_CLK_N',         type: 'AnalogIn0', bank: 'VCC', connection: 'manual', desc: 'Extra clock input for FPGA target'}
          { name: 'POR_BUTTON_N',     type: 'InputStd', bank: 'VCC', connection: 'manual', desc: 'Power-on reset button input'}
          { name: 'JTAG_SRST_N',      type: 'InputStd', bank: 'VCC', connection: 'manual', desc: 'JTAG header SRST, triggers POR'}
          // ChipWhisperer IO
          { name: 'IO_CLKOUT',        type: 'BidirStd', bank: 'VCC', connection: 'manual', desc: 'Manual clock output for SCA setup'}
          { name: 'IO_TRIGGER',       type: 'BidirStd', bank: 'VCC', connection: 'manual', desc: 'Manual trigger output for SCA setup'}
        ],
      },

      pinmux: {
        special_signals: [
          // Straps
          { name: 'tap0',   pad: 'IOC8',  desc: 'TAP strap signal.'   },
          { name: 'tap1',   pad: 'IOC5',  desc: 'TAP strap signal.'   },
          { name: 'dft0',   pad: 'IOC3',  desc: 'DFT strap signal.'   },
          { name: 'dft1',   pad: 'IOC4',  desc: 'DFT strap signal.'   },
          // JTAG
          { name: 'tck',    pad: 'IOR3',  desc: 'JTAG tck signal.'    },
          { name: 'tms',    pad: 'IOR0',  desc: 'JTAG tms signal.'    },
          { name: 'trst_n', pad: 'IOR4',  desc: 'JTAG trst_n signal.' },
          { name: 'tdi',    pad: 'IOR2',  desc: 'JTAG tdi signal.'    },
          { name: 'tdo',    pad: 'IOR1',  desc: 'JTAG tdo signal.'    },
        ],
      }
    }
  ]
}