# Running Renode

Tips for running Renode

## Automatically Start Renode Script

To streamline firing-up renode, use the `-e` flag to execute onload:

```
renode "i @sim/config/shodan_hellovector.resc; start"
```

This will start the renode script (resc) automatically.

Make sure to follow with `"i @path/to/file.resc; start` where the path starts
after `$ROOTDIR` (don't include the `$ROOTDIR` in the path).

## Using Headless Mode

To utilize without the pop-up renode consoles, utilize two flags:

1. `--disable-xwt` -- to prevent the windows from opening
2. `--port 1234` -- or port of choice for prompt access

This can be combined with the `-e` flag:
```
renode --disable-xwt --port 1234 -e "i @sim/config/shodan_hellovector.resc; start"
```

In a separate terminal window (or tmux pane), start a telnet at that port for
prompt access:
```
telnet 127.0.0.1 1234
```

Using this should create the following prompt:
```
$ telnet 127.0.0.1 1234
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
Renode, version 1.10.1.31213 (773406ba-202011051557)

(monitor) i @sim/config/shodan_hellovector.resc
(machine-0)  start
Starting emulation...
(machine-0)
```

## Quitting Headless Renode Session

To quit the session, just type `quit` into the telnet prompt:

```
(machine-0) quit
Renode is quitting
Connection closed by foreign host.
```

This will quickly exit both telnet and the renode process on this port.