# Copyright 2022 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

sim_configs:
	$(RENODE_SIM_GENERATOR_SCRIPT)

clean_sim_configs:
	@rm -rf $(OUT)/renode_configs

# NB: $(CANTRIP_ROOTSERVER_*) is built together with $(CANTRIP_KERNEL_*)

$(OUT)/ext_flash_debug.tar: $(MATCHA_BUNDLE_DEBUG) $(CANTRIP_KERNEL_DEBUG) $(CANTRIP_ROOTSERVER_DEBUG) | $(OUT)/tmp
	cp -f $(MATCHA_BUNDLE_DEBUG) $(OUT)/tmp/matcha-tock-bundle
	${C_PREFIX}strip $(OUT)/tmp/matcha-tock-bundle
	${C_PREFIX}objcopy -O binary -g $(OUT)/tmp/matcha-tock-bundle ${OUT}/tmp/matcha-tock-bundle.bin
	ln -sf $(CANTRIP_KERNEL_DEBUG) $(OUT)/tmp/kernel
	ln -sf $(CANTRIP_ROOTSERVER_DEBUG) $(OUT)/tmp/capdl-loader
	tar -C $(OUT)/tmp -cvhf $(OUT)/ext_flash_debug.tar matcha-tock-bundle.bin kernel capdl-loader

$(OUT)/ext_flash_release.tar: $(MATCHA_BUNDLE_RELEASE) $(CANTRIP_KERNEL_RELEASE) $(CANTRIP_ROOTSERVER_RELEASE) | $(OUT)/tmp
	cp -f $(MATCHA_BUNDLE_RELEASE) $(OUT)/tmp/matcha-tock-bundle
	${C_PREFIX}strip $(OUT)/tmp/matcha-tock-bundle
	${C_PREFIX}objcopy -O binary -g $(OUT)/tmp/matcha-tock-bundle ${OUT}/tmp/matcha-tock-bundle.bin
	ln -sf $(CANTRIP_KERNEL_RELEASE) $(OUT)/tmp/kernel
	ln -sf $(CANTRIP_ROOTSERVER_RELEASE) $(OUT)/tmp/capdl-loader
	tar -C $(OUT)/tmp -cvhf $(OUT)/ext_flash_release.tar matcha-tock-bundle.bin kernel capdl-loader

# Dredge the platform configuration for the physical address where the
# cpio archive is expected.
# NB: #define must be at the start of the line so any commented out
#    copies are skipped
CPIO_LOAD_ADDRESS=$(shell awk '/^#define[ \t]+CPIO_BASE_ADDR/ { print $$3 }' \
    $(CANTRIP_SRC_DIR)/apps/system/platforms/shodan/platform.camkes)

# Renode commands to issue before the initial start of a simulation.
# This pauses all cores and then sets cpu0 (SC) & cpu1 (SMC) running.
RENODE_PRESTART_CMDS=pause; cpu0 IsHalted false;
PORT_PRESTART_CMDS:=$(shell $(ROOTDIR)/scripts/generate-renode-port-cmd.sh $(RENODE_PORT))

## Launches an end-to-end build of the Shodan system and starts Renode
#
# This top-level target triggers the `matcha_tock_release`, `cantrip`, `renode`,
# `multihart_boot_rom`, and `iree` targets to build the entire system and then
# finally starts the Renode simulator.
#
# This is the default target for the build system, and is generally what you
# need for day-to-day work on the software side of Shodan.
simulate: renode multihart_boot_rom $(OUT)/ext_flash_release.tar iree_model_builtins $(CANTRIP_OUT_RELEASE)/ext_builtins.cpio
	$(RENODE_CMD) -e "\
    \$$tar = @$(ROOTDIR)/out/ext_flash_release.tar; \
    \$$cpio = @$(CANTRIP_OUT_RELEASE)/ext_builtins.cpio; \
    \$$cpio_load_address = ${CPIO_LOAD_ADDRESS}; \
    $(PORT_PRESTART_CMDS) i @sim/config/shodan.resc; $(RENODE_PRESTART_CMDS) start"

## Debug version of the `simulate` target
#
# This top-level target does the same job as `simulate`, but instead of
# unhalting the CPUs and starting the system, this alternate target only unhalts
# cpu0, and uses the debug build of TockOS from the `matcha_tock_debug` target.
simulate-debug: renode multihart_boot_rom $(OUT)/ext_flash_debug.tar iree_model_builtins $(CANTRIP_OUT_DEBUG)/ext_builtins.cpio
	$(RENODE_CMD) -e "\
    \$$repl_file = @sim/config/platforms/shodan-debug.repl; \
    \$$tar = @$(ROOTDIR)/out/ext_flash_debug.tar; \
    \$$cpio = @$(CANTRIP_OUT_DEBUG)/ext_builtins.cpio; \
    \$$cpio_load_address = ${CPIO_LOAD_ADDRESS}; \
    \$$kernel = @$(CANTRIP_KERNEL_DEBUG); $(PORT_PRESTART_CMDS) \
	  i @sim/config/shodan.resc; $(RENODE_PRESTART_CMDS) cpu1 CreateSeL4 0xffffffee; start"

## Debug version of the `simulate` target
#
# This top-level target does the same job as `simulate-debug`, but instead of
# unhalting the CPUs and starting the system, this alternate target starts
# renode with no CPUs unhalted, allowing for GDB to be used for early system
# start.
debug-simulation: renode multihart_boot_rom $(OUT)/ext_flash_debug.tar iree_model_builtins $(CANTRIP_OUT_DEBUG)/ext_builtins.cpio
	$(RENODE_CMD) -e "\
    \$$repl_file = @sim/config/platforms/shodan-debug.repl; \
    \$$tar = @$(ROOTDIR)/out/ext_flash_debug.tar; \
    \$$cpio = @$(CANTRIP_OUT_DEBUG)/ext_builtins.cpio; \
    \$$cpio_load_address = ${CPIO_LOAD_ADDRESS}; \
    \$$kernel = @$(CANTRIP_KERNEL_DEBUG); $(PORT_PRESTART_CMDS) \
	  i @sim/config/shodan.resc; start"

# Launches Shodan with Minisel as the rootserver for low-level testing purposes.
# FIXME(@aappleby) - The Minisel bundle renames "minisel.elf" to "capdl-loader"
# because we don't currently have any way to specify the rootserver app other
# than via filename
$(OUT)/ext_flash_minisel_debug.tar: $(MATCHA_BUNDLE_DEBUG) $(CANTRIP_KERNEL_DEBUG) $(CANTRIP_OUT_DEBUG)/minisel/minisel.elf | $(OUT)/tmp
	ln -sf $(MATCHA_BUNDLE_DEBUG) $(OUT)/tmp/matcha-tock-bundle
	ln -sf $(CANTRIP_KERNEL_DEBUG) $(OUT)/tmp/kernel
	ln -sf $(CANTRIP_OUT_DEBUG)/minisel/minisel.elf $(OUT)/tmp/capdl-loader
	tar -C $(OUT)/tmp -cvhf $(OUT)/ext_flash_minisel_debug.tar matcha-tock-bundle kernel capdl-loader

$(OUT)/ext_flash_minisel_release.tar: $(MATCHA_BUNDLE_RELEASE) $(CANTRIP_KERNEL_RELEASE) $(CANTRIP_OUT_RELEASE)/minisel/minisel.elf | $(OUT)/tmp
	ln -sf $(MATCHA_BUNDLE_RELEASE) $(OUT)/tmp/matcha-tock-bundle
	ln -sf $(CANTRIP_KERNEL_RELEASE) $(OUT)/tmp/kernel
	ln -sf $(CANTRIP_OUT_RELEASE)/minisel/minisel.elf $(OUT)/tmp/capdl-loader
	tar -C $(OUT)/tmp -cvhf $(OUT)/ext_flash_minisel_release.tar matcha-tock-bundle kernel capdl-loader

simulate_minisel: renode multihart_boot_rom $(OUT)/ext_flash_minisel_debug.tar
	$(RENODE_CMD) -e "\$$tar = @$(ROOTDIR)/out/ext_flash_minisel_debug.tar; \$$kernel = @$(CANTRIP_KERNEL_DEBUG); $(PORT_PRESTART_CMDS) \
	  i @sim/config/shodan.resc; $(RENODE_PRESTART_CMDS) start"

simulate_minisel_release: renode multihart_boot_rom $(OUT)/ext_flash_minisel_release.tar
	$(RENODE_CMD) -e "\$$tar = @$(ROOTDIR)/out/ext_flash_minisel_release.tar; $(PORT_PRESTART_CMDS) \
	  i @sim/config/shodan.resc; $(RENODE_PRESTART_CMDS) start"

.PHONY:: sim_configs clean_sim_configs simulate simulate-debug debug-simulation