| Renode changelog | |
| ================ | |
| This document describes notable changes to the Renode framework. | |
| 1.15.0 - 2024.03.18 | |
| ------------------- | |
| Added architecture support: | |
| * initial support for ARMv7-R and Cortex-R8, verified with ThreadX and Zephyr | |
| * initial support for Cortex-A55 | |
| * initial support for Cortex-M23 and Cortex-M85 | |
| * support for RISC-V Bit Manipulation extensions - Zba, Zbb, Zbc and Zbs | |
| * support for RISC-V Half-precision Floating Point (Zfh) extension, including vector operations | |
| * support for RISC-V Andes AndeStar V5 ISA extension | |
| Added and improved platform descriptions: | |
| * generic Cortex-R8 platform | |
| * Renesas EK-RA2E1 board with R7FA2E1A9 SoC | |
| * Arduino Uno R4 Minima platform with Renesas F7FA4M1A SoC | |
| * Renesas CK-RA6M5 board with R7FA6M5B SoC, with initial radio support | |
| * Renesas EK-RA8M1 board with R7FA8M1A SoC | |
| * Renesas R7FA2L1A SoC | |
| * Renesas DA14592 SoC | |
| * Renesas RZ/T2M-RSK board with RZ/T2M SoC | |
| * Gaisler GR712RC SoC with UART, timer, GPIO, FTMC and Ethernet | |
| * Gaisler GR716 SoC with UART, timer and GPIO | |
| * Gaisler UT32M0R500 SoC with UART, timer and GPIO | |
| * NXP S32K388 with UART, timers, watchdog, SIUL2, SPI, Mode entry module and others | |
| * NXP LPC2294 SoC with UART, CAN, timer and interrupts support | |
| * Xilinx Zynq UltraScale+ MPSoC platform support with single core Cortex-A53, UART, GPIO and I2C | |
| * singlecore Cortex-R5 part of Zynq UltraScale+ MPSoC platform with UART, TTC, Ethernet and GPIO | |
| * Nuvoton NPCX9 platform support with UART, various timers, SPI, flash and other peripherals | |
| * ST Nucleo H753ZI with STM32H753 SoC with a range of ST peripherals | |
| * updates to Armv8-A platforms | |
| * updates to Ambiq Apollo4 | |
| * updates to Xilinx Zynq 7000 | |
| * various updates in STM32 platform files | |
| Added peripheral models: | |
| * ABRTCMC, I2C-based RTC | |
| * Altera JTAG UART | |
| * Ambiq Apollo4 Watchdog | |
| * Arm Global Timer | |
| * Arm Private Timer | |
| * Arm SP804 Timer | |
| * ArmSnoopControlUnit | |
| * BCM2711 AUX UART | |
| * BME280 sensor | |
| * Betrusted EC I2C | |
| * Betrusted SoC I2C | |
| * Bosch M_CAN | |
| * CAN to UART converter | |
| * Cadence Watchdog Timer | |
| * Gaisler APBUART | |
| * Gaisler GPIO | |
| * GigaDevice GD32 UART | |
| * HS3001 sensor | |
| * ICM20948 sensor | |
| * ICP10101 sensor | |
| * Infineon SCB UART | |
| * LINFlexD UART | |
| * MB85RC1MT Ferroelectric Random Access Memory | |
| * MXIC MX66UM1G45G flash | |
| * NPCX FIU | |
| * NPCX Flash | |
| * NPCX HFCG | |
| * NPCX ITIM32 | |
| * NPCX LFCG | |
| * NPCX MDMA | |
| * NPCX Monotonic Counter | |
| * NPCX SPIP | |
| * NPCX Timer and Watchdog | |
| * NPCX UART | |
| * NXP LPC CAN | |
| * NXP LPC CTimer | |
| * NXP LPC USART | |
| * OB1203A sensor | |
| * PL190 vectored interrupt controller | |
| * PL330_DMA (CoreLink DMA-330) Controller | |
| * Renesas DA14 DMA peripheral | |
| * Renesas DA14 GPIO | |
| * Renesas DA14 General Purpose Timer | |
| * Renesas DA14 UART | |
| * Renesas DA14 I2C | |
| * Renesas DA16200 Wi-Fi module | |
| * Renesas RA series AGT | |
| * Renesas RA series GPIO | |
| * Renesas RA series GPT | |
| * Renesas RA series ICU | |
| * Renesas RA series SCI | |
| * Renesas RZ/T2M GPIO | |
| * Renesas RZ/T2M SCI | |
| * S32K3XX Miscellaneous System Control Module | |
| * S32K3XX Periodic Interrupt Timer | |
| * S32K3XX Real Time Clock | |
| * S32K3XX Software Watchdog Timer | |
| * S32K3XX System Integration Unit Lite 2 | |
| * S32K3XX System Timer Module | |
| * S32K3XX FlexIO stub | |
| * S32K3XX Mode Entry Module | |
| * SHT45 temperature/humidity sensor | |
| * SPI NAND flash | |
| * STM32WBA PWR | |
| * Samsung K9 NAND Flash | |
| * Smartbond UART | |
| * Universal Flash Storage (JESD220F) | |
| * Universal Flash Storage Host Controller (JESD223E) | |
| * XMC4XXX UART | |
| * ZMOD4xxx sensor | |
| * Zynq 7000 System Level Control Registers | |
| 1.14.0 - 2023.08.08 | |
| ------------------- | |
| Added architecture support: | |
| * initial support for ARMv8-A, verified with a range of software, from Coreboot and U-Boot to Linux | |
| * initial support for ARMv8-R, verified with U-Boot and Zephyr | |
| Added and improved platform descriptions: | |
| * generic Cortex-A53 platform, in flavors with GICv3 and GICv2 | |
| * generic Cortex-A78 platform | |
| * generic Cortex-R52 platform | |
| * HiFive Unmatched platform support, with UART, PWM, I2C, GPIO, Ethernet, QSPI and other peripherals | |
| * Nucleo WBA52CG with STM32WBA52 | |
| * updated OpenTitan and EarlGrey platform to a newer version | |
| * various updates in STM32 platform files | |
| * translation support for Espressif ESP32 chips | |
| Added peripheral models: | |
| * ARM GIC, compatible with various specification versions | |
| * ARM generic timer | |
| * CMSDK APB UART | |
| * Cypress S25H Flash | |
| * EFR32xG2 I2C | |
| * EFR32xG2 RTCC | |
| * EFR32xG2 UART | |
| * Marvell Armada Timer | |
| * MXC UART | |
| * OMAP Timer | |
| * OpenTitan Entropy Distribution Network | |
| * Quectel BC66 | |
| * Quectel BG96 | |
| * SI7210 Temperature sensor | |
| * SPI multiplexer | |
| * STM32F4 CRC | |
| * STM32F4 Flash | |
| * STM32H7 Flash | |
| * STM32WBA Flash | |
| * STM32H7 Hardware Semaphore | |
| * STM32H7 SPI | |
| * STM32WBA SPI | |
| * STM32WBA ADC | |
| * Synopsys DWC Ethernet QoS model, along with Linux-based tests | |
| * TMP108 Temperature sensor | |
| Added demos and tests: | |
| * Cortex-A53 and Cortex-A78 running Coreboot, ATF and Linux | |
| * Zephyr running echo_client demo on STM32F7-disco with Quectel BG96 | |
| * basic Cortex-A53 Zephyr ``hello-world`` test and sample | |
| * additional Zephyr tests for Cortex-A53: ``synchronization``, ``philosophers``, kernel FPU sharing | |
| * seL4 Adder Sample test for Cortex-A53 | |
| * range of Zephyr tests for Cortex-R52, along with custom-made, synthetic tests | |
| * precise pausing tests for LED and terminal tester | |
| Added features: | |
| * renode-test allows to run tests with a specified tag via the ``--include`` switch | |
| * DPI interface for external HDL simulators, supporting AXI4 interface | |
| * portable package creation on dotnet | |
| * option to have Robot test pause execution deterministically after a match in various testers: UART, LED, log | |
| * duty cycle detection in LED tester | |
| * option to load files (e.g. raw binaries, hex files) to different localizations, like memories | |
| * support for relative paths in REPL file ``using`` directive | |
| * MPU support for Cortex-M | |
| * ``FAULTMASK`` register in Cortex-M | |
| * support for Trace Based Model performance simulator by Google | |
| * read and write hooks for peripherals | |
| * DPI interface support for co-simulating with RTL, with initial support for AXI4 bus | |
| * build.sh ``--profile-build`` switch to enable easier profiling of translation libraries | |
| * mechanism for progressing virtual time without executing instructions | |
| * support for subregions in Cortex-M MPU | |
| * support for FPU exceptions for Cortex-M | |
| * quad word (64-bit) peripherals API | |
| * ``CSV2RESD`` tool, for easy generation of RESD files | |
| * automatic selection of port used to communicate between Renode and Robot | |
| * option to pause emulation of Robot keywords | |
| * support for NMI interrupts in RISC-V | |
| * option to save Renode logs for all tests | |
| * ``Execute Python`` keyword in Robot tests | |
| Changed: | |
| * GDB interacts with Renode much faster | |
| * Renode now uses Robot Framework 6.0.2 for testing (with an option to use other versions at your own risk) | |
| * RESD format now accepts negative ``sampleOffsetTime`` | |
| * HEX files loader now supports extended segment address and start segment address sections | |
| * GDB ``autostart`` parameter now starts the simulation as soon as the debugger is connected | |
| * VerilatorIntegrationLibrary is now part of Renode packages | |
| * improved performance of the virtual time handling loop | |
| * improved parsing of RESD files | |
| * improved memory allocation mechanism to allocate memory regions larger than 2GiB | |
| * support for mapping memories on very high offsets | |
| * improved GDB connection robustness | |
| * exposed Monitor as a variable in Python hooks | |
| * improved the GDB compare helper script | |
| * improved handling of input files in TFTP server module | |
| Fixed: | |
| * cursor blinking in terminal on Windows | |
| * crash when NetworkServer tried to log an invalid packet | |
| * race condition when trying to pause during the machine startup | |
| * platform serialization when CPU profiler is enabled | |
| * limit buffer behavior in verilated peripherals when they are reset | |
| * registration is no longer taken into account when looking for dependency cycles in REPL files | |
| * exception when issuing a DMA transaction during register access | |
| * reported PC on exception when executing vector instructions in RISC-V | |
| * several RISC-V vector instructions handling, e.g. ``vfredosum``, ``vsetivli`` and ``vector_fpu`` | |
| * invalid instruction block exiting on RISC-V | |
| * handling of ``c.ebreak`` instruction in RISC-V, allowing for software breakpoints | |
| * building fixes on dotnet | |
| * removing of IO access flag from memory pages | |
| * invalidation of dirty translation blocks | |
| * handling of MMU faults on address translations | |
| * serialization of RESD files | |
| * automatic creation of TAP interface on Linux | |
| * ARM LDA/STL instructions decoding | |
| * handling of platforms containing both 32- and 64-bit CPUs | |
| * file permissions in .NET portable packages | |
| * handling of non-resettable register fields | |
| * several RISC-V vector instructions | |
| * handling of the context menu in the Monitor window | |
| * support for Cortex-M4F in LLVMDisassembler | |
| * packets matching method in NetworkInterfaceTester | |
| * address calculations in DMA engine | |
| * custom build properties handling in Renode build script | |
| * handling of time reporting and empty test cases in renode-test | |
| Improvements in peripherals: | |
| * AmbiqApollo4 Timer | |
| * ArrayMemory | |
| * AS6221 Temperature sensor | |
| * AT Command Modem | |
| * AT91 Timer | |
| * Cadence UART | |
| * Cortex-M Systick | |
| * EF32MG12 LDMA | |
| * Ibex | |
| * LIS2DW12 Accelerometer | |
| * LiteX I2C | |
| * LSM6DSO | |
| * MAX30208 Temperature sensor | |
| * MAX32650 GPIO | |
| * MAX32650 I2C | |
| * MAX32650 RTC | |
| * MAX32650 SPI | |
| * MAX32650 Timer | |
| * MAX32650 TPU | |
| * MAX32650 WDT | |
| * MAX86171 AFE | |
| * nRF52840 SPI | |
| * nRF52840 I2C | |
| * nRF52840 GPIO | |
| * OpenTitan HMAC | |
| * OpenTitan PLIC | |
| * OpenTitan ROM | |
| * OpenTitan OTP | |
| * OpenTitan Key Manager | |
| * OpenTitan Flash | |
| * OpenTitan Reset Manager | |
| * OpenTitan KMAC | |
| * OpenTitan CSRNG | |
| * OpenTitan Alert Handler | |
| * OpenTitan Timer | |
| * OpenTitan OTBN | |
| * PL011 UART | |
| * Quectel BC660K | |
| * SAMD5 UART | |
| * SiFive GPIO | |
| * Silencer | |
| * STM32 DMA | |
| * STM32G0 DMA | |
| * STM32 EXTI, with specific implementations for STM32F4, STM32H7 and STM32WBA | |
| * STM32 GPIO | |
| * STM32F7 I2C | |
| * STM32L0 LPTimer | |
| * STM32L0 RCC | |
| * STM32H7 RCC | |
| * STM32F4 RTC | |
| * STM32 SPI | |
| * STM32 Timer | |
| * STM32F7 USART | |
| 1.13.3 - 2023.02.22 | |
| ------------------- | |
| Added and improved platform descriptions: | |
| * basic Adafruit ItsyBitsy M4 Express platform with UART and memories | |
| * various STM32 platforms with improved EXTI connections, IWDG configuration, and new CRC, Flash, PWR, RCC, and LPTimer models added to selected platforms | |
| * MAX32650 with a new I2C model | |
| * Zynq 7000 with new I2C, SPI, UART and TTC models | |
| * Apollo 4 with a new Timer model and a ``program_main2`` bootrom function mock | |
| * OpenTitan Earlgrey with new OTBN accelerator, AON Timer, System Reset controller, Entropy source, and SRAM controller models | |
| * nRF52840 with a new EGU model | |
| * EFR32MG1x with a new LDMA model and improved USART interrupt connections | |
| Added peripheral models: | |
| * Apollo4 IOMaster I2C mode | |
| * Apollo4 Timer | |
| * AS6221 skin temperature sensor | |
| * Cadence I2C controller | |
| * Cadence SPI controller | |
| * Cadence TTC | |
| * Cadence UART | |
| * Cadence xSPI controller | |
| * EFR32MG12 LDMA controller | |
| * LIS2DW12 accelerometer sensor | |
| * LC709205F Fuel Gauge | |
| * Macronix MX25R flash | |
| * MAX30208 temperature sensor | |
| * MAX32650 I2C controller | |
| * MAX77818 Fuel Gauge | |
| * MAX86171 Optical AFE | |
| * NRF52840 EGU | |
| * OpenTitan AON Timer | |
| * OpenTitan Big Number Accelerator (OTBN) full model | |
| * OpenTitan ClockManager stub | |
| * OpenTitan Entropy Source controller | |
| * OpenTitan SRAM controller | |
| * OpenTitan SystemReset controller | |
| * Quectel BC660K radio | |
| * RV8803 RTC | |
| * STM32F0 CRC | |
| * STM32H7 RCC | |
| * STM32L0 Flash controller | |
| * STM32L0 Low Power Timer | |
| * STM32L0 PWR | |
| * TMP103 temperature sensor | |
| Added demos and tests: | |
| * RTC mode unit test | |
| * Adafruit ItsyBitsy M4 Express Zephyr shell_module test | |
| * STM32L072 tests for: DMA, PVD interrupt, SPI flash, IWDG, LPUART, EEPROM, and CRC | |
| * STM32F4 tests for RTC and running an STM32CubeMX app | |
| * Zynq tests for I2C, TTC, SPI flash, xSPI, and UART based on Linux | |
| Added features: | |
| * support for RESD - Renode Sensor Data format, allowing users to provide multiple sensors with time-coordinated data specific for a given sensor; currently supported in MAX86171, MAX30208, AS6221, and LSM6DSO | |
| * reorganized CPU classes and interfaces, allowing for easier integration of external CPU simulators | |
| * IOMMU, with example usage in WindowIOMMU, WindowMMUBusController, and SimpleDMA | |
| * new key bindings in the Monitor: Ctrl+D for closing the window and Ctrl+U for clearing the current input | |
| * new key bindings in all terminal windows: Shift+Up/Down arrow for line scrolling and Shift+Home/End for jumping to the beginning and the end of the buffer | |
| * option to configure UART window location offsets via the config file | |
| * support for 64-bit bus accesses and 64-bit peripherals | |
| * support non-resettable peripheral registers and register fields | |
| * option to register hooks to be called whenever a RISC-V register is accessed - this can be used to emulate non-standard implementation of these registers | |
| * option to set CPU exceptions from the outside of the CPU | |
| * Robot keyword to verify that GPIO has a specified state for a given period of time | |
| * verbose mode in Robot tests | |
| Changed: | |
| * Robot tests do not need a header with settings and keywords anymore | |
| * changed the conditional syntax in Robot tests to use IF/ELSE for compatibility with newer Robot Framework versions | |
| * cleaned up tests-related file organization in the repository | |
| * simplified flags for renode-test under dotnet | |
| * added skip_mono and skip_dotnet tags to Robot tests | |
| * removed internal signal mappings from STM32 EXTI, making the interrupt routing more explicit in REPL files | |
| * console mode will be started instead of telnet when the UI fails to start | |
| * reset can now be executed on a not started machine | |
| * expanded the Execution Tracer with ``TrackMemoryAccesses`` and ``TrackVectorConfiguration`` options, along with disassembler-generated info | |
| * OnMemoryAccess hooks now receive the current PC as a parameter | |
| * changed the CRCEngine API and improved implementation | |
| * ELF symbol lookup will now skip several types of unimportant symbols | |
| * tags can now have zero width to ease the creation of variable width registers | |
| * added option to invert reset logic in AXI4Lite | |
| * added handling of the ``WSTRB`` signal in AXI4Lite | |
| * added support for various address lines connections in Wishbone | |
| * added various access lengths support for verilated peripherals | |
| * timeout value for Verilator connections can now be defined in compile time | |
| * all architectures now sync their PC on memory accesses | |
| * UARTBase is now a container for IUART devices | |
| * added option to clear all event subscribers in LimitTimer | |
| * added ITimer interface for handling basic timer properties | |
| * extended the excluded assembly list in TypeManager to speed up startup on dotnet | |
| Fixed: | |
| * flushing of the log when using the ``lastLog`` command | |
| * deadlock when using the ``--console`` mode on dotnet with collapsed log entries enabled | |
| * Wireshark handling on macOS | |
| * TAP support on macOS | |
| * Asciinema usage in multi-machine setups | |
| * closing of Renode in several problematic scenarios | |
| * handling of end of file detection in HEX parsing | |
| * robustness of BLESniffer | |
| * timestamps discrepancies in file logs and console logs | |
| * compilation under Visual Studio on Windows | |
| * compilation on Windows when the PLATFORM environment variable is set | |
| * graph titles for metrics visualizer | |
| * handling of peripheral regions in Profiles | |
| * file sharing and access type settings for open files | |
| * floating point registers access on RV32 | |
| * several RISC-V Vector instructions | |
| * crash when the CPU is created with an invalid type | |
| * RISC-V PMP config reading and writing and NAPOT decoding | |
| * translation cache invalidation in multicore RISC-V scenarios | |
| * SEV generation on Cortex-M | |
| * handling of multi-instructions blocks in Xtensa | |
| * execution of too many instructions in a single block | |
| * button sample tests for STM32F072q | |
| * fastvdma co-simulation test | |
| * qCRC packet handling in GDB | |
| * decoding of GDB packets, selecting the command handler based on the longest match for a packet | |
| * address translation in GDB | |
| * UARTToSpiConverter logic and user experience | |
| * handling of Step parameter in ClockEntry | |
| * changing of frequency for divider calculation in ComparingTimer | |
| * cleanup of old clock entries | |
| Improvements in peripherals: | |
| * AmbiqApollo4 IOMaster | |
| * AmbiqApollo4 RTC | |
| * AthenaX5200 | |
| * Cadence TTC | |
| * Dummy I2C Slave | |
| * EFR32 CMU | |
| * EFR32 USART | |
| * EFR32 RTCC | |
| * Generic SPI Flash | |
| * HiMax HM01B0 | |
| * I2C dummy device | |
| * LSM6DSO IMU | |
| * Mapped Memory | |
| * Micron MT25Q | |
| * MPFS PDMA | |
| * NRF52840 SPI | |
| * NRF52840 I2C | |
| * NRF52840 RTC | |
| * NVIC interrupt controller | |
| * OpenCores I2C | |
| * OpenTitan I2C | |
| * OpenTitan Flash controller | |
| * OpenTitan LifeCycle controller | |
| * OpenTitan ROM controller | |
| * SAMD5 UART | |
| * SI70xx temperature sensor | |
| * SiFive GPIO | |
| * STM32 GPIO | |
| * STM32 SPI | |
| * STM32 Timer | |
| * STM32F4 IndependentWatchdog | |
| * STM32F4 RTC | |
| * STM32F7 I2C | |
| * STM32F7 USART | |
| * STM32L0 RCC | |
| * STM32G0 DMA | |
| 1.13.2 - 2022.10.03 | |
| ------------------- | |
| Added platforms: | |
| * Ambiq Apollo4 with ADC, GPIO, IO Master, System Timer, RTC, UART and other peripherals | |
| * STM32L07x with ADC, GPIO, I2C ,RTC, SPI, Timer, USART, IWDG, DMA and other peripherals (RCC) | |
| * verilated Ibex core with the rest of the platform natively in Renode | |
| Added models: | |
| * MAX32650 TPU with CRC32 support | |
| * basic support for MAX32650 ADC | |
| * MAX32650 SPI | |
| * MAX32650 Watchdog | |
| * LSM6DSO IMU | |
| * EFR32xG12DeviceInformation | |
| * External CPU stub as a base for integration of other CPU simulators | |
| * OpenTitan SPI host | |
| * OpenTitan I2C host | |
| * OpenTitan Alert Handler, along with updates to other OpenTitan peripherals with alert functionality | |
| * new algorithms and cores in AthenaX5200 | |
| * EFR32MG1 BitAccess | |
| * i.MX RT GPTimer | |
| Added demos and tests: | |
| * STM32L072 Zephyr shell_module demo and test | |
| * Ambiq Apollo4 Hello World example from Ambiq Suite and various peripheral tests | |
| * MAX32652 EVKIT Hello World example from MAX32652 SDK | |
| * FPGA ISP co-simulation demo and test | |
| Added features: | |
| * experimental support for .NET 6 framework | |
| * guest-application profiling for ARM | |
| * Interrupt hooks for ARM | |
| * BLE sniffer support for Wireshark | |
| * Perfetto profiler format support in guest-application profiling, along with process detection on RISC-V | |
| * binary output format of execution tracer, along with a Python helper script to decode data | |
| * new Run Until Breakpoint keyword for Robot tests | |
| * verbose mode in Robot tester | |
| * region of interest support in FrameBufferTester | |
| * framework for providing timestamped sensor data | |
| * WishboneInitiator bus in Verilator support | |
| * nightly “sources” package with the whole content required for building Renode offline | |
| Organizational improvements: | |
| * added GitHub issue and PR templates, along with an `issue reproduction repository <https://github.com/renode/renode-issue-reproduction-template>`_ | |
| updated contributing instructions | |
| Changed: | |
| * added mapping for l2ZeroDevice in PolarFire SoC | |
| * added caching of canvas bounds in TermSharp for improved performance | |
| * restructured height map storage in TermSharp | |
| * updated descriptions of SLTB004A and EFR32MG12 targets | |
| * restructured CPU-related class hierarchy | |
| * disabled TCG optimizations and liveness analysis for improved performance | |
| * updated OpenTitan supported version, changing a range of OpenTitan peripherals | |
| * major refactor of VerilatorIntegrationLibrary, with new interfaces and code restructuration | |
| * updated symbol exclusion rules not to include $x symbol names in SymbolLookup | |
| * disabled TLB flushing in RISC-V on mode change for improved performance | |
| * allowed more than one page permission at a time in RISC-V, reducing the number of address translations | |
| * improved output of Robot tests with timestamps and explicit test results after each suite | |
| * SD card controller now supports more card types | |
| Fixed: | |
| * PMP implementation for RISC-V | |
| * several RISC-V vector instructions including floating-point vector instructions | |
| * 'Take Screenshot' button in VideoAnalyzer | |
| * non-blocking CPU stepping | |
| * crash when loading file without sufficient permissions | |
| * external MMU not respecting the `no_page_fault` flag | |
| * issues with concurrent creation of config file | |
| * indeterminism of sel4_extensions test | |
| * GDB Stub not issuing an error when trying to add zero-sized watchpoint | |
| * handling of watchpoints on big-endian platforms | |
| * portability of MSBuild calls across different host systems | |
| * PolarFire SoC Watchdog test | |
| * serialization of FrameBufferTester | |
| * translation cache flushing after reset | |
| Improvements in peripherals: | |
| * Cortex-M NVIC | |
| * HPSHostController | |
| * NRF52840 Watchdog | |
| * BMC050 accelerometer | |
| * MAX32650 RTC | |
| * MAX32650 GCR | |
| * STM32F7 I2C | |
| * STM32G0 DMA | |
| * Micron MT25Q | |
| * i.MX RT GPIO | |
| 1.13.1 - 2022.07.23 | |
| ------------------- | |
| Added platforms: | |
| * MAX32652 with UART, GPIO, Timer, PWRSEQ, GCR and RTC | |
| * Thunderboard Sense 2 (SLTB004A) based on EFR32MG12 | |
| Added models: | |
| * STM32G0 DMA controller | |
| * OpenTitan CSRNG | |
| * OpenTitan OTP controller | |
| * OpenTitan Life Cycle controller | |
| * USBserialport_S3B model for Qomu | |
| * SAMD5 UART | |
| * SAMD20 UART | |
| * AES and Message Authentication cores for AthenaX5200 | |
| * LiteX MMCM controller in the 32-bit CSR width configuration | |
| * LiteX Framebuffer in the 32-bit CSR width configuration | |
| Added demos: | |
| * Qomu running Zephyr shell | |
| * SLTB004A running Gecko SDK baremetal CLI sample | |
| Added features: | |
| * guest-application profiling support | |
| * TAP integration on Windows | |
| * interrupt end hooks for RV64 | |
| * option for gathering execution metrics when running tests | |
| * tests for logging from a sub-object | |
| * PolarFireSoC Watchdog tests | |
| * the disassembly output format to the Execution Tracer module | |
| * option for filtering messages by log level in the log tester | |
| Changed: | |
| * improved support for ARMv8-M registers | |
| * added option to compare raw values of selected registers in the gdb_compare script | |
| * implemented generation of guest-host PC mappings info on block translation | |
| * added `Frequency` property to ComparingTimer | |
| * monitor-tests: Use virtual time in the pause test | |
| * added static flushing to the logger | |
| * included missing tools (like gdb_compare, sel4_extensions) in all packages | |
| * added precompilation of Python scripts before running (to detect errors early) | |
| * added user-specified file paths handling | |
| * added filtering of ANSI escape codes from Robot tests keyword results | |
| * added option to enable profiler globally in EmulationManager | |
| * added command to disable automatic symbol switching in seL4 GDB extensions | |
| * improved RISC-V kernel breakpoints support in seL4 GDB extensions | |
| * code generator is now compiled with more aggressive optimizations | |
| * changed the CPU class structure, allowing for core implementations not based on translation libraries | |
| * updated the Nexys Video platform description and demo binaries | |
| Fixed: | |
| * 'Should Output Voice Data' test for QuickFeather | |
| * various RISC-V vector instructions | |
| * register values accessing in RISC-V | |
| * help button behavior in AdvancedLoggerViewer | |
| * concurrent access to Pixel Manipulation Tools | |
| * clock residuum handling, e.g. improving the behavior of the BLE demo | |
| * serialization of externals and GDB stub | |
| * stacktrace reporting when exception is rethrown on the native-managed boundary | |
| * packaging of license files from dependency projects | |
| * exception handling on EnsureTypeIsLoaded | |
| * various fixes in file handling layer | |
| * improved handling of variables assigned to variables in the Monitor | |
| * handling of multiple CPUs with different configurations in GDB | |
| * STM32F413 RCC address | |
| * DDR mapping in PolarFire SoC | |
| * TCM memory size in miv_rv32 | |
| Improvements in peripherals: | |
| * NVIC | |
| * STM32F4_RCC | |
| * STM32_ADC | |
| * STM32_GPIOPort | |
| * MiV_CoreGPIO | |
| * GigaDevice_GD25LQ | |
| * MC3635 | |
| * SynopsysEthernetMAC | |
| * LiteSDCard_CSR32 | |
| * ResetPin | |
| * HPSHostController | |
| 1.13.0 - 2022.04.29 | |
| ------------------- | |
| Added platforms: | |
| * Xtensa sample controller stub | |
| * MIMXRT1064-EVK | |
| * STM32L552 | |
| * ARVSOM | |
| * BeagleV StarLight | |
| * Sparc GR716 | |
| * RISC-V virt | |
| * S32K118 with LPIT, LPTMR, GPIO, Clock generator mock | |
| * STM32G0 | |
| * STM32F412 | |
| * STM32H743 | |
| * MIV_RV32 | |
| Added models: | |
| * new models for i.MX RT 1064: PWM, timer, ADC, LPSPI, Flex SPI, TRNG | |
| * new models for nRF52840: RNG, Radio, Watchdog, ECB, PPI infrastructure | |
| * new models for STM32: ADC, slave CAN, PWR, watchdog | |
| * new models for OpenTitan: flash controller, timer, PLIC, HMAC, AES, KMAC, ROM controller, Key manager, Reset manager | |
| * new models for Polarfire SoC: system services, user crypto features (RNG and RSA), Mustein GPU and various fixes to platform description | |
| * new model for Zynq 7000: XADC | |
| * new generic models: | |
| * generic SPISensor | |
| * HostCamera device | |
| * TrivialUart | |
| * HPSHostController - fake I2C host master device for communicating with simulated devices | |
| * GigaDevice_GD25LQ - initial model | |
| * VirtIO block device model | |
| Added demos: | |
| * Murax SoC with verilated UART with simple echo demo | |
| * LiteX with verilated CFU running CFU Playground demo | |
| * Zynq with verilated FastVDMA running Linux | |
| * NRF52840 BLE demo running Zephyr ``central_hr`` and ``peripheral_hr`` samples | |
| * Leon3 running Zephyr shell | |
| * GR716 running Zephyr shell | |
| * Xtensa sample controller running Zephyr "Hello World" sample | |
| Added core features: | |
| * RISC-V: vector extension 1.0 support | |
| * Xtensa architecture support | |
| * RISC-V: access to proper set of registers + custom registers from GDB | |
| * RISC-V: support for Custom Function Unit extensions | |
| * WFE support on ARM cores | |
| * uninterruptible debugging option to all architectures | |
| * floating point support to Cortex-M platforms | |
| * basic support for ARM 64-bit registers | |
| * Cortex-M33 stub | |
| * Sparc: added CSR register and exposed FSR register | |
| Added features: | |
| * primary selection copy support in TermSharp | |
| * support for asciinema UART dumps | |
| * support for native library communication in verilated peripherals | |
| * APB3 bus implementation for VerilatorIntegrationLibrary | |
| * support for loading HEX files | |
| * video capture mechanism with host camera integration | |
| * startup parameter for specifying the config file | |
| * register access keywords for Robot Framework integration | |
| * keyboard input in VideoAnalyzer on Windows | |
| * option to stop on first error when running tests | |
| * option to save failed test logs | |
| * opcodes counting mechanism, along with RISC-V opcodes files parser | |
| * execution tracing mechanism | |
| * Wireshark support on Windows | |
| * seL4-aware GDB debug support | |
| * BLE wireless medium including Wireshark support | |
| * gdb_compare script allowing to compare execution of two GDB instances, for example one connected to Renode and one to hardware | |
| * support for vector registers in GDB | |
| * CPU Id parameter in ARM cores | |
| * option to control timestamp format and visibility in LoggingUartAnalyzer | |
| * option to skip library fetch during build | |
| * option to flush terminal history when connecting via socket | |
| * support for external, bus-connected MMU | |
| Changed: | |
| * bumped Robot Framework version to ``4.0.1`` | |
| * RobotFramework: log entries keywords now accept regex patterns | |
| * STM: renamed some UART ports to USART | |
| * ZynqEthernet: removed and replaced with CadenceGEM | |
| * Zedboard: updated demo to Linux 5.10 | |
| * reworked CPU halting | |
| * added CRC to packets sent by NetworkServer | |
| * RISC-V: added logs on unhandled CSR accesses | |
| * improved build time by changes to TermSharp project organization | |
| * various updates to STM32F746 CPU definition | |
| * added limit to displayed command history in AntShell | |
| * moved output of Robot tests to current directory when running on Windows | |
| * XWT events are now queued in GTK engine | |
| * added option to reconnect to SocketServerProvider | |
| * explicitly used XZ compression with pacman | |
| * added option to limit function names logging to unique entries, vastly improving performance | |
| * removed dependency to realpath from build and run scripts | |
| * removed dependency to ZeroMQ | |
| * renamed EOSS3_SPIMaster to DesignWare_SPI | |
| * dropped Fedora version indicator from packages | |
| * optimized RISC-V PMP handling | |
| * reworked PlatformLevelInterruptController to operate on contexts instead of targets | |
| * added O/H/W write commands to ArduinoLoader | |
| * enabled TLS 1.1 and TLS 1.2 in CachingFileFetcher | |
| * improved multicore debugging support in GDB | |
| * allowed to reuse testers in Robot tests | |
| * added option to safely include the same C# file multiple times during one Renode run | |
| * added ``tests.yaml``, containing all Robot tests, to all packages | |
| * add debug mode for all architectures disabling interrupts when stepping over guest code | |
| * simplified fixture selection when running tests | |
| * allowed unaligned memory access by default in IbexRiscV32 | |
| * added GDB support for VS bits in MSTATUS register | |
| * added interrupts support in verilated peripherals | |
| * added support for CPU registers wider than 64-bits in Renode (C# part, not tlibs) | |
| * improved and unified the --plain mode handling | |
| * refactored the disassembly handling subsystem | |
| * improved GDB packets handling performance | |
| * added option to control serialization mode in the configuration file | |
| * added optional compiled files cache | |
| * improved handling of exceptions at the C/C# boundary | |
| * flattened the TimeFramework structure to increase performance | |
| * improved performance of handling of truncated translation blocks | |
| * improved performance of TermSharp height map calculations and row handling | |
| * added several tlib performance optimizations | |
| * added the synchronized timers emulation mode | |
| * added support for the flow control in UART | |
| * added support for bright colors to TermSharp | |
| * added basic VSCode launch configurations for Renode on Mono | |
| * unified ``renode`` and ``renode-test`` scripts names across all packages | |
| * added support for per-core peripheral registration | |
| * added option to the build script to export the build directory | |
| * improved performance of ELF reloading | |
| * updated Conda build scripts to better work with the latest Renode, improved Windows support | |
| * added option to configure step for clock entries | |
| * improved startup performance by skipping analysis of uninteresting assemblies in TypeManager | |
| * tied the AutoRepaintingVideo refresh frequency to the virtual time flow | |
| * enabled passing the -e parameter to Renode even when providing a script file parameter | |
| * added option to preserve temporary files from Robot tests | |
| * added a source of a log message to the log tester | |
| * Provides and Requires keywords now use state snapshots | |
| Fixed: | |
| * CPU endianness handling in GDB register accesses | |
| * SPARC WRASR and CASA instructions | |
| * SPARC registers handling in GDB | |
| * memory invalidation on writes in MappedMemory | |
| * ARM instructions: ASX, SAX, SUB16 and UQSUB | |
| * symbol name mangling on MacOS | |
| * updating PC before raising MMU exception on RISC-V | |
| * unaligned ld_phys handling, resolves problems of possible memory corruption | |
| * possible race conditions in TerminalTester | |
| * IO access path selection in tlib | |
| * support for big-endian peripherals | |
| * running tests in sequential mode | |
| * HiFive Unleashed platform description including PHY advertisement and RAM size | |
| * Ethernet PHY advertisement on the Zedboard platform | |
| * cross-endian bus accesses | |
| * endian conversion wrappers for untranslated accesses | |
| * registers mapping of fflags/frm/fcsr, resolving GDB registers XML generation | |
| * running tests when the build phase failed | |
| * it-status unit test | |
| * added LibLLVM to all packages | |
| * whitespace handling in resc scripts on Windows | |
| * occasional assertion fail when loading ELF files | |
| * setting breakpoints on virtual addresses | |
| * MicroPython tests | |
| * installation on Linux with a separate /opt mount point | |
| * demangling symbols from the anonymous namespace | |
| * SoftFloat's type conversion functions | |
| * illegal instruction exception on wrong CSR access on RISC-V | |
| * support for quad words access on the system bus | |
| * possible memory leak in tlib | |
| * improved precision of calculations in BasicClockSource and ComparingTimer Fixed | |
| * support for various versions of standard libraries on Linux hosts (libdl, libutil, etc) | |
| * libc dependencies for the Renode portable package | |
| * invalidation of translation blocks on writes | |
| * handling big offsets in MappedMemory | |
| * ARM-M PRIMASK and xPSR handling | |
| * PowerPC registers listing in GDB | |
| * improved tlib debugging by not omitting the frame pointer on debug build | |
| * fixed sfence.vma instruction implementation for RISC-V | |
| * potential math errors (underflows/overflows) when handling the virtual time | |
| * handling input redirected from file in the console mode | |
| * prevented GdbStub from sending telnet config bytes on new connections | |
| * serialization of paused state | |
| * ad-hoc compiler support in the portable package | |
| * flushing of log tester | |
| * UartPtyTerminal serialization | |
| * reporting the exit code in renode-test | |
| * RISC-V custom CSRs handling | |
| * resetting of a machine from the context of another machine | |
| * thread-safety of interrupt handling mechanism | |
| * occasional dependency fail on static constructors | |
| Improvements in peripherals: | |
| * CoreLevelInterruptor | |
| * PlatformLevelInterruptController | |
| * NVIC | |
| * CortexAPrivateTimer | |
| * BMA180 | |
| * CC1200 | |
| * Micron_MT25Q | |
| * SynopsysEthernetMAC | |
| * K6xF_Ethernet | |
| * CadenceGEM | |
| * OV2640 | |
| * GaislerMIC | |
| * PL011 | |
| * EFR32_USART | |
| * LowPower_UART | |
| * OpenTitan_UART | |
| * OpenTitan_GPIO | |
| * IMXRT_ADC | |
| * IMXRT_LPSPI | |
| * LPUART | |
| * STM32F7_I2C | |
| * STM32_UART | |
| * STM32 RTC | |
| * STM32_TIMER | |
| * STM32DMA | |
| * STMCAN | |
| * EXTI | |
| * NRF52840_CLOCK | |
| * NRF52840_Timer | |
| * NRF52840 GPIO | |
| * LiteX_I2S | |
| * Litex_GPIO | |
| * MPFS_PDMA | |
| * MPFS_DDRMock | |
| * Gaisler_GPTimer | |
| 1.12.0 - 2021.04.02 | |
| ------------------- | |
| Added: | |
| * STM32F072 platform, with the STM32F072b Discovery board | |
| * i.MX RT1064 platform | |
| * NRF52840 platform, with Arduino Nano 33 BLE Sense board | |
| * OpenTitan EarlGrey RISC-V platform with a range of OpenTitan peripherals | |
| * CV32E40P-based RISC-V platform with many PULP peripherals | |
| * LiteX with RISC-V Ibex CPU platform support | |
| * CrossLink-NX evaluation board | |
| * ice40up5k-mdp-evn board | |
| * Zephyr-based test suite for QuickLogic QuickFeather with EOS S3 | |
| * Tock demo on LiteX/VexRiscv and STM32F4 | |
| * Mbed demo on STM32F7 | |
| * integration with Arduino IDE and Arduino CLI | |
| * Python Standard Library, to be used with Python hooks and scripts in Renode | |
| * support for images in the Monitor, along with possibility to take framebuffer screenshots. This also works with certain terminal emulators, like iTerm2, when in headless mode | |
| * option to connect UART to the running console, improving headless capabilities | |
| * option to run Renode Monitor directly in console, overlapped with logs, using the ``--console`` command line switch | |
| * support for virtual addressing in GDB | |
| * option to combine multiple interrupt or GPIO signals into one, using logical OR, directly in REPL files | |
| * multi-bus support and AXI4 support (both as an initiator and a receiver) in co-simulation with Verilator | |
| * ability to send synthetic network frames in Robot tests | |
| * various sensor models: MC3635, LSM330, LSM303DLHC, LSM9DS1, LIS2DS12, BMP180 | |
| * seven-segment display model | |
| * support for camera interfaces for nRF52840 and other platforms, along with a basic HM01B camera model | |
| * support for sound data via PDM and I2S interfaces in nRF52840 and EOS S3 | |
| * 32-bit CSR versions of various LiteX peripherals | |
| * ``window-height`` and ``window-width`` Renode config file options | |
| Changed: | |
| * ad hoc C# compilation now uses the same, bundled compiler on all OSes, also allowing for compilation in the portable Linux package | |
| * bumped the officially supported Ubuntu version to 20.04 | |
| * added execution metrics analyzer to all Renode packages | |
| * verilated peripherals can now also be used on Windows and on macOS | |
| * verilated UART peripherals have updated protocol message numbers, requiring them to be recompiled to work with the latest Renode version | |
| * moved to use openlibm instead of libm on Linux, improving portability | |
| * GDB can now access memory across pages in a single access | |
| * switched the unit testing framework from NUnit2 to NUnit3 | |
| * reduced the number of transitions between the C and C# code, improving performance | |
| * improved performance of peripheral writes | |
| * tests print the run summary at the end of the output, making it easier to spot errors | |
| * revamped handling of the vectored interrupt mode for RISC-V cores | |
| * RISC-V CPUs can now optionally allow for unaligned memory accesses | |
| * updated the default privileged architecture version for VexRiscv CPU | |
| * VexRiscv can now use standard RISC-V interrupt model | |
| * changed the flow of NVIC interrupt handling, significantly improving performance | |
| * STM32F7 DMA2D and LTDC now support more pixel blending modes | |
| * reimplemented and modernized several STM32 peripherals | |
| * improved the model of K6xF Ethernet controller | |
| * LiteSDCard model now supports DMA interface | |
| * EXTI controller now has a configurable number of output lines | |
| * improved handling of dummy bytes in MPFS QSPI | |
| Fixed: | |
| * tests running from installed Renode packages creating output files in forbidden locations | |
| * serialization of NetworkInterfaceTester and UARTBackend | |
| * possible non-deterministic behavior of UART backend in tests | |
| * occasional file sharing violation in PosixFileLocker | |
| * Renode printing out colors when in plain mode | |
| * non-determinism in the button model | |
| * time drift caused by unreported virtual ticks and improper instruction counting | |
| * crash in TermsharpProvider when running on Windows | |
| * invalid default frequency for STM32L1 | |
| 1.11.0 - 2020.10.22 | |
| ------------------- | |
| Added: | |
| * support for generating execution metrics, covering information like executed instructions count, memory and peripheral accesses, and interrupt handling | |
| * infrastructure for reporting supported CPU features to GDB | |
| * tests for Icicle Kit with PolarFire SoC | |
| * ``--debug-on-error`` option for ``renode-test`` allowing interactive debugging of failed Robot tests | |
| * ``lastLog`` Monitor command displaying ``n`` last log messages | |
| * ``currentTime`` monitor command with information about elapsed host and virtual time | |
| * ``WriteLine`` UART helper method to feed strings from the Monitor or scripts | |
| * support for non-base RISC-V instruction sets disassembly | |
| * support for custom Robot test results listeners | |
| * support for Python-based implementation of (stateful) custom CSRs and custom instructions in RISC-V | |
| * option to control RISC-V CSR access validation level interactively | |
| * dummy support for data cache flush instruction in VexRiscv | |
| * 64-bit decrementer support in PowerPC | |
| * nRF52840 RTC model | |
| * STM32F4 RTC model | |
| * STM32F4 RCC stub model | |
| * unified timer model for STM32F4 and STM32L1 platforms | |
| * support for ATAPI CD-ROM | |
| * burst read support in OpenCores I2C | |
| Changed: | |
| * time flow settings in Icicle Kit script now ensure full determinism | |
| * all testers (for UART, LED, network, sysbus accesses and log messages) now rely on virtual time instead of host time and accept floating point timeouts | |
| * portable package now includes requirements.txt file | |
| * skipped tests do not generate save files anymore | |
| * ``Clear`` Monitor command does not remove current working directory from searched paths | |
| * WFI handling in RISC-V is simplified, improving performance on sleepy systems | |
| * translation block fetch logger messages are now logged with Info instead of Debug level | |
| * Cortex-M CPUs now reports their registers to GDB | |
| * several infrastructural changes in the PCI subsystem | |
| * STM32L1 oscillators are now all reported as ready | |
| Fixed: | |
| * Renode logo appearing in UART analyzer windows when running without Monitor | |
| * logs not being fully written out when terminating Renode | |
| * keyboard event detection in framebuffer window when no pointer device is attached | |
| * crash when the logger console reports width equal to 0 | |
| * crash of ad-hoc compilation on Renode portable. Note that this still requires a C# compiler to be available on the host system | |
| * crash when connecting GDB with the first core not being connected | |
| * occasional crash when providing incorrect CLI arguments | |
| * invalid disassembly of 64-bit RISC-V instructions | |
| * crash on machine reset when using custom CSRs in RISC-V | |
| * handling of multi-byte reads in LiteX I2C model | |
| * handling of images with unaligned size in USB pen drive | |
| * invalid LED connections in STM32F4 | |
| 1.10.1 - 2020.07.30 | |
| ------------------- | |
| This is a hotfix release overriding 1.10.0. | |
| Fixed: | |
| * crash on Windows when accessing high memory addresses | |
| * installation instructions in README | |
| 1.10.0 - 2020.07.28 | |
| ------------------- | |
| Added: | |
| * support for the PolarFire SoC-based Icicle Kit platform, with a demo running Linux | |
| * experimental support for OpenPOWER ISA | |
| * support for NXP K64F with UART, Ethernet and RNG | |
| * basic support for Nordic nRF52840 | |
| * Microwatt platform, with Potato UART, running MicroPython or Zephyr | |
| * LiteX platform with a 4-core VexRiscv in SMP | |
| * LiteX demo running Microwatt as a CPU | |
| * LiteX demo with VexRiscv booting Linux from the SD card | |
| * LiteX demo with VexRiscv showing how to handle input and output via I2S | |
| * LiteX MMCM model, I2S model and SD card controller model | |
| * several peripheral models for QuickLogic EOS S3: ADC, SPI DMA, Packet FIFO, FFE etc | |
| * ADXL345 accelerometer model | |
| * PAC1934 power monitor model | |
| * PCM encoder/decoder infrastructure for providing audio data to I2S devices | |
| * modular network server allowing to easily add server components to the emulation without a host-to-guest connection | |
| * built-in TFTP server module | |
| * file backend for UARTs, allowing to send output directly to a file (``uart CreateFileBackend``) | |
| * ``alias`` Monitor command | |
| * ``console_log`` Monitor command to simply print to the log window without level filtering | |
| * ``--no-gui`` build option to build without graphical dependencies | |
| * option to define an average cycles count per instruction, to be used by CPU counters | |
| * code formatting rules for translation libraries, to be used with Uncrustify | |
| Changed: | |
| * Renode is now able to be compiled with ``mcs``. This means that you can use your distribution's Mono package instead of the one provided by mono-project.com, as long as it satisfies the minimum version requirement (currently Mono 5.2) | |
| * the default log level is now set to ``INFO`` instead of ``DEBUG`` | |
| * all PolarFire SoC peripherals are now renamed from PSE_* to MPFS_*, to follow Microchip's naming pattern | |
| * major rework of the SD card model, along with the added SPI interface | |
| * RI5CY core can now be created with or without FPU support | |
| * STM32 and SAM E70 platforms now have verified ``priorityMask`` in NVIC | |
| * Cortex-M based platforms can now be reset by writing to NVIC | |
| * easy way to update timer values between synchronization phases, significantly improving the performance of polling on timers | |
| * tests are now able to run in parallel, using the ``-j`` switch in the testing script execution | |
| * the pattern for download links in scripts for binaries hosted by Antmicro has been changed | |
| * portable package now includes testing infrastructure and sample tests | |
| * the LLVM-based disassembly library is now rebuilt, using less space and being able to support more architectures on all host OSes | |
| * the C++ symbol demangling now relies on a `CxxDemangler <https://github.com/southpolenator/CxxDemangler>`_ library, instead of libstdc++ | |
| * failed Robot tests will now produce snapshots allowing users to debug more easily | |
| * SVD-based log messages on reads and writes are now more verbose | |
| * Terminal Tester API has changed slightly, allowing for easier prompt detection, timeout control etc. | |
| Fixed: | |
| * crash when running tests with empty ``tests.yaml`` file | |
| * crash when Renode is unable to find the root directory | |
| * crash when loading broken or incompatible state snapshot with ``Load`` | |
| * several issues in the PPC architecture | |
| * ``mstatus`` CSR behaviour when accessing FP registers in RISC-V | |
| * PMP napot decoding in RISC-V | |
| * evaluation of the IT-state related status codes in ARM CPUs | |
| * invalid setting of CPUID fields in x86 guests | |
| * PolarFire SoC platform description and various models: CAN, SPI, SD controller, etc. | |
| * ``ODR`` register behavior in STM32F1 GPIO port | |
| * ``State changed`` event handling in LED model | |
| * invalid disposal of the SD card model, possibly leading to filesystem sharing violations | |
| * some cursor manipulation commands in TermSharp | |
| * performance issues when hitting breakpoints with GDB | |
| * on the fly compilation of "*.cs" files in the portable Renode package | |
| * Mono Framework version detection | |
| * upgrading Renode version on Windows when installed using the ``msi`` package | |
| * error message when quitting Renode on Windows | |
| * running tests from binary packages | |
| * support for testing in Conda Renode package | |
| * other various fixes in Conda package building | |
| 1.9.0 - 2020.03.10 | |
| ------------------ | |
| Breaking changes: | |
| * the Renode configuration directory was moved to another location. | |
| The directory is moved from ``~/.renode`` on Unix-like systems and ``Documents`` on Windows to | |
| ``~/.config/renode`` and ``AppData\Roaming\renode`` respectively. To use your previous settings | |
| and Monitor history, please start Renode 1.9 and copy your old config folder over the new one. | |
| Added: | |
| * support for RISC-V Privileged Architecture 1.11 | |
| * EOS S3 platform, with QuickFeather and Qomu boards support | |
| * EFR32MG13 platform support | |
| * Zolertia Firefly dual radio (CC2538/CC1200) platform support | |
| * Kendryte K210 platform support | |
| * NeTV2 with LiteX and VexRiscv platform support | |
| * EFR32 timer and gpcrc models | |
| * CC2538 GPIO controller and SSI models | |
| * CC1200 radio model | |
| * MAX3421E USB controller model | |
| * LiteX SoC controller model | |
| * support for Wishbone bus in verilated peripherals, exemplified with the ``riscv_verilated_liteuart.resc`` sample | |
| * one-shot mode in AutoRepaintingVideo allowing display models to control when they are refreshed | |
| * ``GetItState`` for ARM Cortex-M cores allowing to verify the current status of the IT block | |
| * scripts to create Conda packages for Linux, Windows and macOS | |
| * requirements.txt with Python dependencies to simplify the compilation process | |
| * configuration option to collapse repeated lines in the log - turn it to false if you observe strange behavior of the log output | |
| Changed: | |
| * VexRiscv now supports Supervisor level interrupts, following latest changes to this core | |
| * PolarFire SoC script now has a sample binary, running FreeRTOS with LwIP stack | |
| * the output of Robot test is now upgraded to clearly indicate time of execution | |
| * NetworkInterfaceKeywords now support wireless communication | |
| * exposed several RISC-V registers to the Monitor | |
| * VerilatedUART now supports interrupts | |
| * tests file format was changed to yaml, thus changing tests.txt to tests.yaml | |
| * test.sh can now run NUnit tests in parallel | |
| * ``./build.sh -p`` will no longer build the portable Linux package as it requires a very specific Mono version | |
| * path to ``ar`` can now be specified in the properties file before building | |
| * MinGW libraries are now compiled in statically, significantly reducing the Windows package size | |
| Fixed: | |
| * crash when trying to set the underlying model for verilated peripheral in REPL | |
| * crash when copying data from the terminal to clipboard on Windows | |
| * crash on loading missing FDT file | |
| * crash when starting the GDB server before loading the platform | |
| * handling of very long commands via GDB | |
| * improper window positioning when running on Windows with a display scaling enabled | |
| * exception reporting from running CPUs | |
| * flushing of closing LoggingUartAnalyzer | |
| * icon installation on Fedora | |
| * rebuilding translation libraries when only a header is changed | |
| * macOS run scripts bundled in packages | |
| * priority level handling in NVIC | |
| * COUNTFLAG handling in NVIC | |
| * several improvements in Cadence GEM frame handling | |
| * FastRead operations in Micron MT25Q flash | |
| * PolarFire SoC Watchdog forbidden range handling | |
| * offset calculation on byte accesses in NS16550 model | |
| * interrupt handling in PolarFire SoC QSPI model | |
| * connected pins state readout in PolarFire SoC GPIO model | |
| * several fixes in HiFive SPI model | |
| * page latch alignment in PolarFire SoC | |
| 1.8.2 - 2019.11.12 | |
| ------------------ | |
| Added: | |
| * a sample running HiFive Unleashed with Fomu running Foboot, connected via USB | |
| * a sample running MicroPython on LiteX with VexRiscv | |
| * vectored interrupts support in RISC-V | |
| * ``pythonEngine`` variable is now availalbe in Python scripting | |
| Changed: | |
| * Renode now requires Mono 5.20 on Linux and macOS | |
| * USB setup packets are now handled asynchronously, allowing more advanced processing on the USB device side | |
| * additional flash sizes for Micron MT25Q | |
| * LiteX_Ethernet has a constant size now | |
| Fixed: | |
| * problem with halting cores in GDB support layer when hitting a breakpoint - GDB works in a proper all-stop mode now | |
| 1.8.1 - 2019.10.09 | |
| ------------------ | |
| Added: | |
| * LiteX with VexRiscv configuration running Zephyr | |
| * USB/IP Server for attaching Renode peripherals as a USB device to host | |
| * optional NMI support in RISC-V | |
| * flash controller for EFR32 | |
| * I2C controller for LiteX | |
| * SPI controller for PicoRV | |
| * framebuffer controller for LiteX | |
| * USB keyboard model | |
| Changed: | |
| * ``-e`` parameter for commands executed at startup can be provided multiple times | |
| * ``polarfire`` platform is now renamed to ``polarfire-soc`` | |
| * style of Robot Framework result files | |
| * MT25Q flash backend has changed from file to memory, allowing software to execute directly from it | |
| * improved LiteX on Fomu platform | |
| * terminals based on sockets now accept reconnections from clients | |
| Fixed: | |
| * ``Bad IL`` exceptions when running on Mono 6.4 | |
| 1.8.0 - 2019.09.02 | |
| ------------------ | |
| Added: | |
| * support for RI5CY core and the VEGA board | |
| * UART and timer models for RI5CY | |
| * support for Minerva, a 32-bit RISC-V soft CPU | |
| * LiteX with Minerva platform | |
| * LiteX with VexRiscv on Arty platform | |
| * SPI, Control and Status, SPI Flash and GPIO port peripheral models for LiteX | |
| * PSE_PDMA peripheral model for the PolarFire SoC platform | |
| * basic slave mode support in PSE_I2C | |
| * EtherBone bridge model to connect Renode with FPGA via EtherBone | |
| * EtherBone bridge demo on Fomu | |
| * RTCC and GPCRC peripheral models for EFR32 | |
| * support for deep sleep on Cortex-M cores | |
| * option of bundling Renode as an ELF executable on Linux | |
| Changed: | |
| * GDB server is now started from the ``machine`` level instead of ``cpu`` and is able to handle multiple cores at once | |
| * renamed ``SetLossRangeWirelessFunction`` to ``SetRangeLossWirelessFunction`` | |
| * LiteX Ethernet now supports the MDIO interface | |
| * updated memory map for several EFR32 platforms | |
| * changed the interrupt handling of EFR32_USART | |
| * several changes in Ethernet PHY | |
| * switch is now started immediately after creation | |
| * the Monitor (and other mechanisms) now uses caching, increasing its performance | |
| * Robot tests are now part of packages | |
| * Robot tests no longer cause the Monitor telnet server to start automatically | |
| * REPL files now accept multiline strings delimited with triple apostrophe | |
| * UART analyzers are writing to the Renode log when running from Robot | |
| * simplified command line switches for running Robot tests | |
| * some Robot keywords (e.g. ``LogToFile``) are not saved between related tests | |
| Fixed: | |
| * compilation of verilated peripheral classes in Windows (backported to 1.7.1 package) | |
| * determinism of SAM E70 tests | |
| * crash when using ``logLevel`` command with ``--hide-log`` switch | |
| * ad-hoc compiler behavior in Windows | |
| * crash on too short Ethernet packets | |
| * byte read behavior in NS16550 | |
| * auto update behavior of PSE_Timer | |
| * connection mode when running the Monitor via telnet | |
| * deserialization of ``SerializableStreamView`` | |
| * crash when completing interrupts in PLIC when no interrupt is pending | |
| * Renode startup position on Windows with desktop scaling enabled | |
| * fence.* operation decoding in RISC-V | |
| * invalid size reported by SD card | |
| * crash when trying to set the same log file twice | |
| * compilation issues on GCC 9 | |
| 1.7.1 - 2019.05.15 | |
| ------------------ | |
| Added: | |
| * integration layer for Verilator | |
| * base infrastructure for verilated peripherals | |
| * base class for verilated UARTs, with analyzer support | |
| * Linux on LiteX with VexRiscv demo | |
| Changed: | |
| * RISC-V CPUs now don't need CLINT in their constructor, but will accept any abstract time provider | |
| * updated LiteX with PicoRV32 and LiteX with VexRiscv platform | |
| Fixed: | |
| * sharing violation when trying to run downloaded files | |
| 1.7.0 - 2019.05.02 | |
| ------------------ | |
| Added: | |
| * PicoRV32 CPU | |
| * LiteX platform with PicoRV32 | |
| * LiteX timer and ethernet (LiteEth) model | |
| * Murax SoC with UART, timer and GPIO controller models | |
| * Fomu target support with LiteX and VexRiscv | |
| * SAM E70 Xplained platform with USART, TRNG and ethernet controller models | |
| * STM32F4 Random Number Generator model | |
| * PSE watchdog model | |
| * PTP support in Cadence GEM ethernet model, along with several fixes | |
| * option to execute CPUs in serial instead of parallel | |
| * support for custom instructions in RISC-V | |
| * ``empty`` keyword in REPL | |
| * graphical display analyzer support on Windows | |
| * multi-target GPIO support, along with the new REPL syntax | |
| * local interrupts in PolarFire SoC platform | |
| * option to pass variables to Robot tests via test.sh | |
| * some SiFive FU540 tests | |
| * network interface tester for Robot tests | |
| * tests for PTP implementation in Zephyr | |
| Changed: | |
| * Micron MT25Q is now able to use file as a backend and does not need to have a separate memory provided in REPL | |
| * Micron MT25Q now has selectable endianess | |
| * ``logFile`` command will now create a copy of the previous log before overwriting it | |
| * ``sysbus LogPeripheralAccess`` will now add the active CPU name and current PC to log messages | |
| * single-stepping of a CPU is now easier, it requires only a single call to ``cpu Step`` on a paused CPU | |
| * NVIC reload value is now 24-bit | |
| * reimplemented the STM32_UART model | |
| * updated the PolarFire SoC memory map | |
| * updated the SiFive FU540 memory map | |
| * ``GetClockSourceInfo`` will now display the name of the timer | |
| * Termsharp will no longer print the NULL character | |
| * RISC-V cores will now abort when trying to run a disabled F/D instruction | |
| Fixed: | |
| * handling of divider in ComparingTimer | |
| * reporting of download progress on some Mono versions | |
| * running Robot tests on Windows | |
| * generation of TAP helper on newest Mono releases | |
| * Renode crashing after opening a socket on the same port twice | |
| * serialization of data storage structures | |
| * architecture name reported on GDB connection for Cortex-M CPUs | |
| * highlighting of wrapped lines in the terminal on Windows | |
| * TAB completion in the Monitor on Windows | |
| * RNG determinism and serialization for multicore/multi-node systems | |
| * SiFive FE310 interrupt connection | |
| * instruction counting in RISC-V on MMU faults | |
| * time progress in multicore systems | |
| * fixes in MiV GPIO controller model | |
| * several fixes and improvements in file backend storage layer | |
| * several fixes in testing scripts | |
| * several fixes in various LiteX peripherals | |
| * several fixes in PSE QSPI and Micron MT25Q model | |
| 1.6.2 - 2019.01.10 | |
| ------------------ | |
| Added: | |
| * instructions on running in Docker | |
| * --pid-file option to save Renode's process ID to a file | |
| Changed: | |
| * RISC-V X0 register is now protected from being written from the Monitor | |
| * Renode will now close when it receives a signal from the environment (e.g. Ctrl+C from the console window) | |
| * invalid instructions in RISC-V will no longer lead to CPU abort - an exception will be issued instead, to be handled by the guest software | |
| * Robot tests will now log more | |
| Fixed: | |
| * formatting of symbol logging | |
| * error reporting in Robot tests using the ``Requires`` keyword | |
| * Microsemi's Mi-V CPU description | |
| 1.6.1 - 2019.01.02 | |
| ------------------ | |
| Added: | |
| * CC2538 Flash Controller | |
| * ECB mode for CC2538 Cryptoprocessor | |
| Changed: | |
| * unhandled read/write logs are now decorated with the CPU name instead of the number | |
| * message acknowledge logic on PolarFire CAN controller | |
| Fixed: | |
| * race condition in PromptTerminal used by the Robot Framework | |
| * Monitor socket not opening in certain situations | |
| * unaligned accesses in RISC-V not setting the proper badaddr value | |
| * handling of data exceeding the maximum packet size of USB endpoint | |
| * memory map and CPU definition for SiFive FE310 | |
| * out of bounds access when using Ctrl+R with wrapped lines in the Monitor | |
| 1.6.0 - 2018.11.21 | |
| ------------------ | |
| Added: | |
| * new USB infrastructure | |
| * new PCI infrastructure | |
| * PolarFire SoC platform support | |
| * atomic instructions on RISC-V | |
| * basic PicoSoC support - the picorv32 CPU and UART | |
| * block-finished event infrastructure - verified on RISC-V and ARM cores | |
| * more PSE peripherals: RTC, PCIe controller, USB controller, QSPI, CAN, etc | |
| * Micron MT25Q flash model | |
| * ``watch`` command to run Monitor commands periodically | |
| * a message on the Monitor when quitting Renode | |
| * qXfer support for GDB, allowing the client to autodetect the architecture | |
| * log tester for Robot Framework | |
| Changed: | |
| * added error handling for uninitialized IRQ objects in REPL loading | |
| * RISC-V CSR registers are now accessible in relevant privilege architecture version only | |
| * RISC-V CPUs no longer require CLINT provided as a constructor parameter | |
| * added second timer interrupt to PSE_Timer | |
| * machine.GetClockSourceInfo now prints the current value for each clock entry | |
| * REPL loading tests are now in Robot | |
| * value provider callbacks on write-only fields will generate exceptions | |
| * watchpoint handling infrastructure | |
| * reworked single stepping | |
| * Monitor errors are forwarded to the GDB client when issuing qRcmd | |
| * LoadELF command initializes PC on all cores by default | |
| * reduced the default synchronization quantum | |
| * CPU abort now halts the emulation | |
| * --disable-xwt no longer requires opening a port | |
| * RISC-V atomic instructions now fail if the A instruction set is not enabled | |
| Fixed: | |
| * pausing and halting the CPU from hooks | |
| * error when trying to TAB-complete nonexisting paths | |
| * packaging script on Windows | |
| * crash on extremely narrow Terminal on Windows | |
| * inconsistent cursor position when erasing in Termsharp | |
| * selection of multibyte UTF characters on Linux | |
| * scrollbar behavior on Windows | |
| * error reporting from executed commands in Robot | |
| * RISC-V cores reset | |
| * several fixes in time framework | |
| * output pin handling and interrupt clearing in PSE_GPIO | |
| * minor fixes in PSE_SPI | |
| * throwing invalid instruction exception on wrong CSR access in RISC-V | |
| * CPU abort will now stop the failing CPU | |
| 1.5.0 - 2018.10.03 | |
| ------------------ | |
| Added: | |
| * custom CSR registers in RISC-V | |
| * VexRiscv CPU | |
| * basic LiteX platform with VexRiscv | |
| * LiteX VexRiscv demo with Zephyr | |
| * single and multinode CC2538 demos with Contiki-NG | |
| * PSE peripherals | |
| * several tests for demos and internal mechanisms | |
| * base classes for bus peripherals, allowing for easier definition of registers | |
| Changed: | |
| * installation instructions in README | |
| * the target .NET version changed to 4.5 reducing the number of dependencies | |
| * forced mono64 on macOS | |
| * renamed the multinode demos directory | |
| * RISC-V CPUs now generate an exception on unaligned memory reads and writes | |
| * CLINT is now optional for RISC-V CPUs | |
| * reimplemented FileStreamLimitWrapper | |
| Fixed: | |
| * first line blinking in terminal on Windows | |
| * performance fixes in function logging | |
| * handling of broken CSI codes in Termsharp | |
| * completely removed the GTK dependency on Windows | |
| * handling of CheckIfUartIsIdle Robot keyword | |
| * resetting of RISC-V-based platforms | |
| * prevented a rare crash on disposing multicore platforms when using hooks | |
| * handling of unsupported characters in Robot protocol | |
| * Windows installer correctly finds the previous Renode installation (may require manual deinstallation of the previous version) | |
| * compilation of translation libraries on Windows is no longer forced on every Renode recompilation | |
| 1.4.2 - 2018.07.27 | |
| ------------------ | |
| Added: | |
| * debug mode in RISC-V, masking interrupts and ignoring WFI when connected via GDB | |
| * installer file for Windows | |
| * GPIO controller for STM32F103, with other improvements to the platform file | |
| * PWM, I2C and SPI peripherals for HiFive Unleashed | |
| * tests for HiFive Unleashed | |
| * configuration option to always add machine name in logs | |
| * test scripts when installing Renode from a package on Linux | |
| Changed: | |
| * changed gksu dependency to pkexec, as Ubuntu does not provide gksu anymore | |
| * virtual time of machines created after some time is synchronized with other machines | |
| * improved Vector Table Offset guessing when loading ELF files on ARM Cortex-M CPUs | |
| * extended capabilities of some Robot keywords | |
| * changed the way peripheral names are resolved in logs, so that they don't disappear when removing the emulation | |
| Fixed: | |
| * support for writing 64-bit registers from GDB | |
| * crash when trying to connect to a nonexisting interrupt | |
| * GDB access to Cortex-M registers | |
| * some fixes in EFR32_USART | |
| 1.4.1 - 2018.06.28 | |
| ------------------ | |
| Added: | |
| * AXI UART Lite model | |
| Changed: | |
| * event dispatching on WPF on Windows | |
| Fixed: | |
| * an error in handling of generated code on Windows, causing the emulated application to misbehave | |
| * font loading and default font size on Windows | |
| 1.4.0 - 2018.06.22 | |
| ------------------ | |
| Added: | |
| * support for RISC-V Privileged Architecture 1.10 | |
| * 64-bit RISC-V target emulation | |
| * support for HiFive Unleashed platform | |
| * support for SiFive Freedom E310 platform | |
| * new way of handling time progression and synchronization in the whole framework | |
| * support for 64-bit registers | |
| * basic support for a range of SiLabs EFM32, EFR32 and EZR32 MCUs | |
| * several new Robot keywords | |
| * Wireshark support for macOS | |
| Changed: | |
| * Windows runs a 64-bit version of Renode | |
| * 32-bit host OSes are no longer supported | |
| * Robot tests can now be marked as OS-specific or ignored | |
| * improvements in CC2538 radio model | |
| * enum values in REPL files can now be provided as integers | |
| * updated interrupt model in RISC-V | |
| * MaximumBlockSize is no longer forced to 1 when starting GDB server | |
| Fixed: | |
| * several fixes in REPL grammar | |
| * fixes in Robot test handling | |
| * fixes in GDB watchpoints and breakpoints | |
| * few other fixes in GDB integration layer | |
| * floating point operations in RISC-V | |
| * atomic operations in RISC-V | |
| * high CPU usage when loading many nodes at the same time | |
| * deserialization of the UART windows | |
| * symbol names caching when loading new symbol files | |
| * several minor fixes in different platform files | |
| 1.3.0 - 2018.01.26 | |
| ------------------ | |
| Added: | |
| * EmulationEnvironment - a mechanism to handle sensor data in a centralized way | |
| * test for loading REPL files | |
| * several registers and commands in CC2538RF | |
| * SCSS device for QuarkC1000 platform | |
| * sample scripts with two nodes running a Zephyr demo | |
| Changed: | |
| * ComparingTimer and LimitTimer are now more similar in terms of API | |
| * macOS runs a 64-bit version of Renode | |
| * changed Arduino 101 with CC2520 board to Quark C1000 devkit | |
| * improvements in RISC-V interrupt handling | |
| * current working directory is now always a part of Monitor's default path | |
| Fixed: | |
| * crash when closing Renode with Wireshark enabled but not yet started | |
| * handling of timer events for a specific timer configuration | |
| * implementation of LED tester | |
| * starting Robot on Windows without administrative privileges | |
| * terminal state after running Robot tests | |
| * improper timer initialization in RISC-V's CoreLevelInterruptor | |
| * text highlighting in wrapped lines in terminal windows | |
| 1.2.0 - 2017.11.15 | |
| ------------------ | |
| Added: | |
| * support for RISC-V architecture | |
| * support for Microsemi Mi-V platform | |
| * thin OpenOCD layer in GDB remote protocol support | |
| Changed: | |
| * timers can now hold values up to 64 bits | |
| * ``Button`` peripheral can now have inverted logic | |
| * GDB server can be configured to autostart after the first "monitor halt" received | |
| Fixed: | |
| * translation cache invalidation on manual writes to memory | |
| * reset of ``LimitTimer`` peripheral, which is the base for most of the supported timers | |
| 1.1.0 - 2017.11.14 | |
| ------------------ | |
| Added: | |
| * sample scripts for different platforms | |
| * support for running Renode on Windows | |
| * EFR32MG cpu support. For the list of peripherals, see efr32mg.repl | |
| * more robust support for SVD files | |
| * support for '\n -> \r\n' patching in Termsharp console windows | |
| * support for font configuration in Termsharp | |
| * support for CRC in Ethernet | |
| * packaging scripts | |
| Changed: | |
| * API for UART-related keywords in Robot Framework integration layer | |
| * the project infrastructure now supports C# 7.0 | |
| * directory organization | |
| Fixed: | |
| * several minor fixes in platform description format (.repl) | |
| * bug where Renode hanged after issuing the "help" command in the Monitor | |
| 1.0.0 - 2017.06.13 | |
| ------------------ | |
| This is the initial release of Renode. | |
| Renode is a virtual development and testing tool for multinode embedded networks. | |
| For more information please visit `<https://www.renode.io>`_. | |