| using "./efr32mg1.repl" |
| |
| rtcc: Timers.EFR32_RTCC @ sysbus 0x40042000 |
| frequency: 32768 |
| -> nvic@30 |
| |
| i2c0: |
| -> nvic@17 |
| i2c1: I2C.EFR32_I2CController @ sysbus <0x4000c400, +0x400> |
| -> nvic@42 |
| |
| usart0: |
| ReceiveIRQ -> nvic@12 |
| TransmitIRQ -> nvic@13 |
| usart1: |
| ReceiveIRQ -> nvic@20 |
| TransmitIRQ -> nvic@21 |
| usart2: UART.EFR32_USART @ sysbus <0x40010800, +0x400> |
| ReceiveIRQ -> nvic@40 |
| TransmitIRQ -> nvic@41 |
| usart3: UART.EFR32_USART @ sysbus <0x40010c00, +0x400> |
| ReceiveIRQ -> nvic@43 |
| TransmitIRQ -> nvic@44 |
| |
| leUart0: |
| -> nvic@22 |
| |
| gpioPort: |
| EvenIRQ -> nvic@10 |
| OddIRQ -> nvic@18 |
| |
| seq_sram: Memory.MappedMemory @ sysbus 0x21000000 |
| size: 0x00002000 |
| |
| sram: |
| size: 0x00040000 |
| |
| flash: |
| size: 0x00100000 |
| |
| flashCtrl: MTD.EFR32xg13FlashController @ sysbus 0x400E0000 |
| flash: flash |
| |
| timer0: |
| -> nvic@11 |
| |
| timer1: |
| -> nvic@19 |
| |
| wtimer0: Timers.EFR32_Timer @ sysbus 0x4001a000 |
| frequency: 0x1000000 //bogus |
| width: TimerWidth.Bit32 |
| -> nvic@36 |
| |
| wtimer1: Timers.EFR32_Timer @ sysbus 0x4001a400 |
| frequency: 0x1000000 //bogus |
| width: TimerWidth.Bit32 |
| -> nvic@37 |
| |
| deviceInformation: Miscellaneous.SiLabs.EFR32xG12DeviceInformation @ sysbus 0x0FE081B0 |
| deviceFamily: DeviceFamily.EFR32MG12P |
| deviceNumber: 0x1 |
| flashDevice: flash |
| sramDevice: sram |
| |
| emu_pwrcfg: Python.PythonPeripheral @ sysbus 0x400E3038 |
| size: 0x8 |
| initable: true |
| filename: "scripts/pydev/repeater.py" |
| |
| emu_if: Python.PythonPeripheral @ sysbus 0x400E3024 |
| size: 0x4 |
| initable: true |
| script: "request.value = 0xffffffff" |
| |
| bitclear: @ sysbus <0x44000000, +0x1000000> |
| |
| bitset: @ sysbus <0x46000000, +0x1000000> |
| |
| nvic: |
| priorityMask: 0xe0 |
| |
| sysbus: |
| init add: |
| Tag <0x400f0000,0x400f03ff> "CRYPTO0" |
| Tag <0x4004e400,0x4004e7ff> "PCNT1" |
| Tag <0x4004e800,0x4004ebff> "PCNT2" |
| Tag <0x40008000,0x400083ff> "VDAC0" |
| Tag <0x4001f000,0x4001f3ff> "CSEN" |
| Tag <0x40055000,0x400553ff> "LESENSE" |
| Tag <0x40052400,0x400527ff> "WDOG1" |
| Tag <0x40022000,0x400223ff> "SMU" |
| Tag <0x4001d000,0x4001d3ff> "TRNG0" |
| Tag <0x4001d004 0x4> "FIFOLEVEL" 0x40 |
| Tag <0xe00ff000, 0xe00fffff> "CM4_ROM_Table" |
| Tag <0xe0041000, 0xe0041fff> "ETM" |
| Tag <0xe0040000, 0xe0040fff> "TPIU" |
| Tag <0xe000e000, 0xe000efff> "System_Control_Space" |
| Tag <0xe0002000, 0xe0002fff> "FPB" |
| Tag <0xe0001000, 0xe0001fff> "DWT" |
| Tag <0xe0000000, 0xe0000fff> "ITM" |
| Tag <0x400e4000, 0x400e43ff> "CMU" |
| Tag <0x400e2000, 0x400e23ff> "LDMA" |
| Tag <0x40052000, 0x400523ff> "WDOG0" |
| Tag <0x4004a000, 0x4004a3ff> "LEUART0" |
| Tag <0x40042000, 0x400423ff> "RTCC" |
| Tag <0x4001c000, 0x4001c3ff> "GPCRC" |
| Tag <0x4001a400, 0x4001a7ff> "WTIMER1" |
| Tag <0x4001a000, 0x4001a3ff> "WTIMER0" |
| Tag <0x40018400, 0x400187ff> "TIMER1" |
| Tag <0x40018000, 0x400183ff> "TIMER0" |
| Tag <0x40010c00, 0x40010fff> "USART3" |
| Tag <0x40010800, 0x40010bff> "USART2" |
| Tag <0x40010400, 0x400107ff> "USART1" |
| Tag <0x40010000, 0x400103ff> "USART0" |
| Tag <0x4000c400, 0x4000c7ff> "I2C1" |
| Tag <0x4000c000, 0x4000c3ff> "I2C0" |
| Tag <0x4000a000, 0x4000afff> "GPIO" |
| Tag <0x40006000, 0x400063ff> "IDAC0" |
| Tag <0x40002000, 0x400023ff> "ADC0" |
| Tag <0x40002038 0x4> "IF" 0x1 #single conversion finished |
| Tag <0x40000400, 0x400007ff> "ACMP1" |
| Tag <0x40000000, 0x400003ff> "ACMP0" |
| Tag <0x0fe08000, 0x0fe083ff> "Chip_config" |
| Tag <0x0fe04000, 0x0fe047ff> "Lock_bits" |
| Tag <0x0fe00000, 0x0fe007ff> "User_Data" |