| *** Variables *** |
| ${UART} sysbus.uart0 |
| ${URI} @https://dl.antmicro.com/projects/renode |
| |
| *** Keywords *** |
| Create Machine |
| Execute Command $bin=${URI}/nrf52840--zephyr-custom_spi_sensors_cs.elf-s_1125736-5cf7322357c0434481335500e9eb38ebe44948c3 |
| Execute Command include @scripts/single-node/nrf52840.resc |
| |
| Execute Command machine LoadPlatformDescriptionFromString "spi_mux: SPI.SPIMultiplexer @ spi2 { init: { SetActiveLow 0; SetActiveLow 1 } }" |
| Execute Command machine LoadPlatformDescriptionFromString "dummy0spi: Mocks.DummySPISlave @ spi_mux 0x0" |
| Execute Command machine LoadPlatformDescriptionFromString "dummy1spi: Mocks.DummySPISlave @ spi_mux 0x1" |
| Execute Command machine LoadPlatformDescriptionFromString "gpio0: { 22 -> spi_mux@0; 23 -> spi_mux@1 }" |
| |
| *** Test Cases *** |
| Should Talk to Two SPI Devices |
| Create Machine |
| Create Terminal Tester ${UART} |
| Execute Command logLevel -1 sysbus.spi2.spi_mux.dummy0spi |
| Execute Command logLevel -1 sysbus.spi2.spi_mux.dummy1spi |
| Execute Command logLevel 3 sysbus.nvic |
| |
| # 0x2B0 -> 21.5 C |
| Execute Command sysbus.spi2.spi_mux.dummy0spi EnqueueValue 0x02 |
| Execute Command sysbus.spi2.spi_mux.dummy0spi EnqueueValue 0xB0 |
| |
| # x 0.008750 , y 0.017500 , z 0.008750 |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0xFF |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0xFF |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0xFF |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0xFF |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0xFF |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0x01 |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0x00 |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0x02 |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0x00 |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0x01 |
| Execute Command sysbus.spi2.spi_mux.dummy1spi EnqueueValue 0x00 |
| |
| Start Emulation |
| |
| Wait For Line On Uart Booting Zephyr |
| Wait For Line On Uart Temperature: 21.50 C |
| Wait For Line On Uart x 0.008750 , y 0.017500 , z 0.008750 |
