| *** Keywords *** |
| Set Machine |
| [Arguments] ${name} |
| Execute Command mach set "${name}" |
| |
| Setup Terminal Tester |
| [Arguments] ${machine} |
| ${tester_id}= Create Terminal Tester sysbus.segger machine=${machine} defaultPauseEmulation=true |
| [return] ${tester_id} |
| |
| *** Test Cases *** |
| Should Run Demo |
| Execute Command i @scripts/multi-node/da16200.resc |
| ${sender_tester}= Setup Terminal Tester Sender |
| ${receiver_tester}= Setup Terminal Tester Receiver |
| |
| Wait For Line On Uart mcu Initialize Success! testerId=${receiver_tester} |
| Wait For Line On Uart mcu Initialize Success! testerId=${sender_tester} |
| |
| Wait For Line On Uart Wifi setting OK. Starting UDP communication timeout=15 testerId=${receiver_tester} |
| Wait For Line On Uart Wifi setting OK. Starting UDP communication timeout=15 testerId=${sender_tester} |
| |
| Wait For Line On Uart UDP data received: from 192.0.2.2:80 -> Ping! testerId=${receiver_tester} |
| Wait For Line On Uart UDP data received: from 192.0.2.1:80 -> Pong! testerId=${sender_tester} |
| |
| Wait For Line On Uart UDP data received: from 192.0.2.2:80 -> Ping! testerId=${receiver_tester} |
| Wait For Line On Uart UDP data received: from 192.0.2.1:80 -> Pong! testerId=${sender_tester} |
| |
| Wait For Line On Uart UDP data received: from 192.0.2.2:80 -> Ping! testerId=${receiver_tester} |
| Wait For Line On Uart UDP data received: from 192.0.2.1:80 -> Pong! testerId=${sender_tester} |
