platforms/cpus/renesas-r7fa2l1a.repl

using "./renesas-r7fa2e1a9.repl"

code_flash:
    size: 0x40000

data_flash:
    size: 0x2000

sram: @ sysbus 0x20000000
    size: 0x8000

port0:
    numberOfConnections: 15

port1:
    numberOfConnections: 16

port3:
    numberOfConnections: 8

port5:
    numberOfConnections: 6

port6: GPIOPort.RenesasRA2_GPIO @ {
        sysbus 0x400400C0;
        sysbus new Bus.BusMultiRegistration { address: 0x40040980; size: 0x40; region: "pinConfiguration" }
    }
    portNumber: 0x6
    numberOfConnections: 11
    pfsMisc: portMisc

    IRQ0 -> icu@1
    IRQ1 -> icu@2
    IRQ2 -> icu@3
    IRQ3 -> icu@4
    IRQ4 -> icu@5
    IRQ5 -> icu@6
    IRQ6 -> icu@7
    IRQ7 -> icu@8
    IRQ8 -> icu@9
    IRQ9 -> icu@10
    IRQ10 -> icu@11
    IRQ11 -> icu@12
    IRQ12 -> icu@13
    IRQ13 -> icu@14
    IRQ14 -> icu@15
    IRQ15 -> icu@16

port7: GPIOPort.RenesasRA2_GPIO @ {
        sysbus 0x400400E0;
        sysbus new Bus.BusMultiRegistration { address: 0x400409C0; size: 0x40; region: "pinConfiguration" }
    }
    portNumber: 0x7
    numberOfConnections: 15
    pfsMisc: portMisc

    IRQ0 -> icu@1
    IRQ1 -> icu@2
    IRQ2 -> icu@3
    IRQ3 -> icu@4
    IRQ4 -> icu@5
    IRQ5 -> icu@6
    IRQ6 -> icu@7
    IRQ7 -> icu@8
    IRQ8 -> icu@9
    IRQ9 -> icu@10
    IRQ10 -> icu@11
    IRQ11 -> icu@12
    IRQ12 -> icu@13
    IRQ13 -> icu@14
    IRQ14 -> icu@15
    IRQ15 -> icu@16

port8: GPIOPort.RenesasRA2_GPIO @ {
        sysbus 0x40040100;
        sysbus new Bus.BusMultiRegistration { address: 0x40040A00; size: 0x40; region: "pinConfiguration" }
    }
    portNumber: 0x8
    numberOfConnections: 10
    pfsMisc: portMisc

    IRQ0 -> icu@1
    IRQ1 -> icu@2
    IRQ2 -> icu@3
    IRQ3 -> icu@4
    IRQ4 -> icu@5
    IRQ5 -> icu@6
    IRQ6 -> icu@7
    IRQ7 -> icu@8
    IRQ8 -> icu@9
    IRQ9 -> icu@10
    IRQ10 -> icu@11
    IRQ11 -> icu@12
    IRQ12 -> icu@13
    IRQ13 -> icu@14
    IRQ14 -> icu@15
    IRQ15 -> icu@16

// Removing PORT9 as it's not present in RA2L1
port9: @ none

gpt:
    [0x09-0x0C] -> icu@[0x4C-0x4F]
    // GPT1 CMPE and CMPF are not connected
    [0x0F-0x10] -> icu@[0x50-0x51]
    // GPT1 PC is not connected
    [0x12-0x15] -> icu@[0x52-0x55]
    // GPT2 CMPE and CMPF are not connected
    [0x18-0x19] -> icu@[0x56-0x57]
    // GPT2 PC is not connected
    [0x1B-0x1E] -> icu@[0x58-0x5B]
    // GPT3 CMPE and CMPF are not connected
    [0x21-0x22] -> icu@[0x5C-0x5D]
    // GPT3 PC is not connected

sci3: SCI.RenesasRA6M5_SCI @ sysbus 0x40070060
    frequency: 32000000
    enableManchesterMode: false
    enableFIFO: false
    fullModel: false
    ReceiveIRQ -> icu@0x93
    TransmitIRQ -> icu@0x94
    TransmitEndIRQ -> icu@0x95

iic1: I2C.RenesasRA_IIC @ sysbus 0x40053100
    ReceiveIRQ -> icu@0x2C
    TransmitIRQ -> icu@0x2D
    TransmitEndIRQ -> icu@0x2E
    ErrorOrEventIRQ -> icu@0x2F

sysbus:
    init add:
        RemoveTag 0x40002000 // Updating "SRAM" due to differences between RA2E1 and RA2L1
        Tag <0x40002000,0x400020db> "SRAM" // SRAM Control
        Tag <0x40050000,0x40050877> "CAN0" // Controller Area Network
        RemoveTag 0x4005c000 // Updating "ADC120" due to differences between RA2E1 and RA2L1
        Tag <0x4005c000,0x4005c0f7> "ADC120" // 12-bit A/D Converter
        Tag <0x4005e000,0x4005e00b> "DAC12" // 12-bit D/A converter
        Tag <0x40072100,0x40072113> "SPI1" // Serial Peripheral Interface 0