| *** Variables *** | |
| ${UART0} sysbus.uart0 | |
| ${UART1} sysbus.uart1 | |
| ${URI} @https://dl.antmicro.com/projects/renode | |
| ${HELLO_ELF} ${URI}/cortex-r52--hirtos-hello.elf-s_140356-d44a0b48e22a17fa8cb83ef08243ec23942812c0 | |
| ${HELLO_PARTITIONS_ELF} ${URI}/cortex-r52--hirtos-hello_partitions.elf-s_285392-644559248d6c6d752fe0dc1b46e3a467cce75841 | |
| *** Keywords *** | |
| Create Machine | |
| Execute Command mach create | |
| Execute Command machine LoadPlatformDescription @platforms/cpus/cortex-r52.repl | |
| Create Multicore Machine | |
| Execute Command mach create | |
| Execute Command machine LoadPlatformDescription @platforms/cpus/cortex-r52_smp.repl | |
| Wait For Lines Per Thread | |
| [Arguments] @{lines} ${testerId} | |
| FOR ${thread} IN RANGE 1 8 | |
| ${id}= Evaluate str(${thread}+1) | |
| ${prio}= Evaluate str(31-${thread}) | |
| ${thread}= Evaluate str(${thread}) | |
| FOR ${line} IN @{lines} | |
| ${line}= Replace String ${line} %THREAD% ${thread} | |
| ${line}= Replace String ${line} %ID% ${id} | |
| ${line}= Replace String ${line} %PRIO% ${prio} | |
| Wait For Line On Uart ${line} treatAsRegex=true testerId=${testerId} | |
| END | |
| END | |
| Wait For Hello Sample | |
| [Arguments] ${testerId} ${cpu}=0 | |
| Wait For Line On Uart HiRTOS running on CPU ${cpu} testerId=${testerId} | |
| Wait For Line On Uart FVP ARMv8-R Hello running on CPU ${cpu} testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Thread scheduler started testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Timer thread started testerId=${testerId} | |
| # First, check if all threads have been started | |
| Wait For Lines Per Thread Thread %THREAD% \\(id %ID%, prio %PRIO%\\): .* Wakeups 1 testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Idle thread started testerId=${testerId} | |
| # Then, make sure each of them has been woken up at least once | |
| Wait For Lines Per Thread Thread %THREAD% \\(id %ID%, prio %PRIO%\\): .* Wakeups 2 testerId=${testerId} | |
| Wait For Hello Partitions Sample | |
| [Arguments] ${testerId} ${cpu}=0 | |
| Wait For Line On Uart HiRTOS Separation Kernel running on CPU ${cpu} testerId=${testerId} | |
| # Check if Partition 1 has been started | |
| Wait For Line On Uart HiRTOS running on CPU ${cpu} testerId=${testerId} | |
| Wait For Line On Uart Hello Partition 1 running on CPU ${cpu} testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Thread scheduler started testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Timer thread started testerId=${testerId} | |
| Wait For Lines Per Thread Partition 1: Thread %THREAD% \\(id %ID%, prio %PRIO%\\): .* Wakeups 1 testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Idle thread started testerId=${testerId} | |
| # Check if Partition 2 has been started | |
| Wait For Line On Uart HiRTOS running on CPU ${cpu} testerId=${testerId} | |
| Wait For Line On Uart Hello Partition 2 on CPU ${cpu} testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Thread scheduler started testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Timer thread started testerId=${testerId} | |
| Wait For Lines Per Thread Partition 2: Thread %THREAD% \\(id %ID%, prio %PRIO%\\): .* Wakeups 1 testerId=${testerId} | |
| Wait For Line On Uart HiRTOS: Idle thread started testerId=${testerId} | |
| # Finally, make sure each thread has been woken up at least once | |
| Wait For Lines Per Thread Partition 1: Thread %THREAD% \\(id %ID%, prio %PRIO%\\): .* Wakeups 2 | |
| ... Partition 2: Thread %THREAD% \\(id %ID%, prio %PRIO%\\): .* Wakeups 2 | |
| ... testerId=${testerId} | |
| *** Test Cases *** | |
| Should Run Hello Sample On One Core | |
| Create Machine | |
| ${tester}= Create Terminal Tester ${UART0} defaultPauseEmulation=true | |
| Execute Command sysbus LoadELF ${HELLO_ELF} | |
| Wait For Hello Sample ${tester} | |
| Should Run Hello Partitions Sample On One Core | |
| Create Machine | |
| ${tester}= Create Terminal Tester ${UART0} defaultPauseEmulation=true | |
| Execute Command sysbus LoadELF ${HELLO_PARTITIONS_ELF} | |
| Wait For Hello Partitions Sample ${tester} | |
| Should Run Hello Sample On Two Cores | |
| Create Multicore Machine | |
| ${cpu0_tester}= Create Terminal Tester ${UART0} | |
| ${cpu1_tester}= Create Terminal Tester ${UART1} | |
| Execute Command sysbus LoadELF ${HELLO_ELF} | |
| Wait For Hello Sample ${cpu0_tester} cpu=0 | |
| Wait For Hello Sample ${cpu1_tester} cpu=1 | |
| Should Run Hello Partitions Sample On Two Cores | |
| Create Multicore Machine | |
| ${cpu0_tester}= Create Terminal Tester ${UART0} | |
| ${cpu1_tester}= Create Terminal Tester ${UART1} | |
| Execute Command sysbus LoadELF ${HELLO_PARTITIONS_ELF} | |
| Wait For Hello Partitions Sample ${cpu0_tester} cpu=0 | |
| Wait For Hello Partitions Sample ${cpu1_tester} cpu=1 |