| # The following lines are not interpreted. | |
| :name: Quark C1000 | |
| :description: This script runs Zephyr shell example on Quark C1000 (32-bit x86). | |
| # The `using` command allows the user to omit a prefix when referring to a peripheral. | |
| # E.g. `using sysbus` allows to refer to the CPU device with `cpu` instead of `sysbus.cpu`. | |
| using sysbus | |
| # The ?= notation indicates a default value if the variable is not set. | |
| $name?="Quark-C1000" | |
| # Create a new machine and set the Monitor's context accordingly. | |
| mach create $name | |
| # Load the hardware description from the REPL file. | |
| machine LoadPlatformDescription @platforms/boards/arduino_101-shield.repl | |
| # This is a sample shell binary: | |
| $bin ?= @https://dl.antmicro.com/projects/renode/zephyr_shell.elf-s_398140-ed6b1a68e94b1cb8ac3cc7d80fb4d36e36a22766 | |
| # This is a default bootloader: | |
| $boot ?= @https://dl.antmicro.com/projects/renode/quark_se_rom.bin-s_8192-b688c8b9380014d7deb2bd42dc218fc5ee8d1abf | |
| # Open a window for the `sysbus.uartB` device - which, in this case, is a default UART for user interaction. | |
| showAnalyzer uartB | |
| # The following series of commands is executed everytime the machine is reset. | |
| macro reset | |
| """ | |
| # Set the WAIT_FOR_JTAG GPIO pin. The bootloader stalls if it's set to low. | |
| gpio OnGPIO 15 true | |
| # Load the bootloader. The address has to be specified as the binary files do not contain | |
| # any addressing information. | |
| sysbus LoadBinary $boot 0xffffe000 | |
| # The ELF files already contain information on where to load each part. They also provide symbols, which | |
| # can be used for execution tracing. | |
| sysbus LoadELF $bin | |
| # By default, the initial PC is set to the ELF entry point. Since the bootloader has to be started before the target application, | |
| # the PC needs to be set manually to the correct value. | |
| sysbus.cpu PC 0xfffffff0 | |
| """ | |
| # Run this macro once to load the binaries. | |
| runMacro $reset | |