| *** Keywords *** |
| Prepare Machine |
| Execute Command include @scripts/single-node/ek-ra2e1.resc |
| |
| *** Test Cases *** |
| Should Run Periodicaly Blink LED |
| Prepare Machine |
| Create Led Tester sysbus.port9.led_blue |
| Create Terminal Tester sysbus.segger_rtt |
| |
| Execute Command agt0 IRQ AddStateChangedHook "Antmicro.Renode.Logging.Logger.Log(LogLevel.Error, 'AGT0 ' + str(state))" |
| # Timeout is only used for checking whether the IRQ has been handled |
| Create Log Tester 0.001 |
| |
| # Configuration is roughly in ms |
| Wait For Prompt On Uart One-shot mode: |
| Write Line To Uart 10 waitForEcho=false |
| Wait For Line On Uart Time period for one-shot mode timer: 10 |
| |
| Wait For Prompt On Uart Periodic mode: |
| Write Line To Uart 5 waitForEcho=false |
| Wait For Line On Uart Time period for periodic mode timer: 5 |
| |
| Wait For Prompt On Uart Enter any key to start or stop the timers |
| Write Line To Uart waitForEcho=false |
| |
| # Timeout is extended by an additional 1ms to account for rounding errors |
| Wait For Log Entry AGT0 True level=Error pauseEmulation=true timeout=0.011 |
| Wait For Log Entry AGT0 False level=Error pauseEmulation=true |
| # move to the begining of a True state |
| Assert Led State True timeout=0.01 pauseEmulation=true |
| # Run test for 5 cycles |
| Assert Led Is Blinking testDuration=0.05 onDuration=0.005 offDuration=0.005 tolerance=0.2 pauseEmulation=true |
| Assert Led State True timeout=0.005 pauseEmulation=true |
| |
| # Stop timers, clear log tester history and check whether the periodic timer stops |
| Write Line To Uart waitForEcho=false |
| Wait For Line On Uart Periodic timer stopped. Enter any key to start timers. pauseEmulation=true |
| Assert And Hold Led State True 0.0 0.05 |
