# GitHub Self-Hosted Runner Configuration

This directory contains configuration for setting up IREE's GitHub Actions
[self-hosted runners](https://docs.github.com/en/actions/hosting-your-own-runners/about-self-hosted-runners).

The [`gcp/`](./gcp) directory contains scripts specific to setting up runners on
Google Cloud Platform (GCP). These are
[Managed Instance Groups](https://cloud.google.com/compute/docs/instance-groups)
that execute the [GitHub actions runner](https://github.com/actions/runner) as a
service initialized on startup. The scripts automate the creation of VM
[Images]([http://cloud/compute/docs/images](https://cloud.google.com/compute/docs/images)
and
[Instance Templates](https://cloud.google.com/compute/docs/instance-templates)
and the creation and update of the instance groups. These scripts mostly just
automate some manual tasks and minimize errors. Our GCP project is
[iree-oss](https://console.cloud.google.com/?project=iree-oss).

Included in the `gcp` directory is the [startup script](./gcp/startup_script.sh)
that is configured to run when the VM instance starts up. It pulls in the rest
of the configuration from the [`config`](./config) directory at a specified
repository commit.

The [`config/`](./config) directory contains configuration that is pulled into
the runner on VM startup. This configuration registers the runner with the
GitHub Actions control plane and then creates services to start the runner and
to deregister the runner on shutdown. When the runner service exits, it
initiates the shutdown of the VM, which triggers the deregister service.

Also in the config directory is configuration of the runner itself. The entry
point is the [`runner.env`](./config/runner.env) file, which is symlinked into
the runner's `.env` file and directs the runner to run
[hooks before and after each job](https://docs.github.com/en/actions/hosting-your-own-runners/running-scripts-before-or-after-a-job).
We use these hooks to ensure a consistent environment for jobs executed on the
runner and to check that the job was triggered by an event that the runner is
allowed to process (for instance, postsubmit runners will refuse to run a job
triggered by a `pull_request` event).

## Ephemeral Runners and Autoscaling

Our runners are ephemeral, which means that after executing a single job the
runner program exits. As noted above, the runner service triggers a shutdown of
the VM instance when the runner exits. This shutdown triggers the deregister
service which attempts to deregister the runner from the GitHub Actions control
plane. Note that if the runner stopped gracefully (i.e. after completing a job,
it's *supposed* to deregister itself automatically). This deregistration is to
catch other cases. It is best effort (as the instance can execute a non-graceful
shutdown), but the only downside to failed deregistration appears to be
"offline" runner entries hanging around in the UI. GitHub will garbage collect
these after a certain time period (30 days for normal runners and 1 day for
ephemeral runners), so deregistration is not critical.

### Runner Token Proxy

Registering a GitHub Actions Runner requires a registration token. To obtain
such a token, you must have very broad access to either the organization or
repository you are registering it in. This access is too broad to grant to the
runners themselves. Therefore, we mediate the token acquisition through a proxy
hosted on [Google Cloud Run](https://cloud.google.com/run). The proxy has the
app token for a GitHub App with permission to manage self-hosted runners for the
"openxla" GitHub organization. It receives requests from the runners when they
are trying to register or deregister and returns them the much more narrowly
scoped [de]registration token. We use
https://github.com/google-github-actions/github-runner-token-proxy for the
proxy. You can see its docs for more details.

## Service Accounts

The presubmit and postsubmit runners run as different service accounts depending
on their trust level. Presubmit runners are "minimal" trust and postsubmit
runners are "basic" trust, so they run as
`github-runner-minimal-trust@iree-oss.iam.gserviceaccount.com` and
`github-runner-basic-trust@iree-oss.iam.gserviceaccount.com`, respectively.

## Passing Artifacts

Using GitHub's [artifact actions](https://github.com/actions/upload-artifact)
with runners on GCE turns out to be prohibitively slow (see discussion in
https://github.com/openxla/iree/issues/9881). Instead we use our own
[Google Cloud Storage](https://cloud.google.com/storage) (GCS) buckets to save
artifacts from jobs and fetch them in subsequent jobs:
`iree-github-actions-presubmit-artifacts` and
`iree-github-actions-postsubmit-artifacts`. Each runner group's service account
has acces only to the bucket for its group. Artifacts are indexed by the
workflow run id and attempt number, so that they do not collide. Subsequent jobs
should *not* make assumptions about where an artifact was stored however,
instead querying the outputs of the job that created it (which should always
provide such an output). This is both to promote DRY principles and for subtle
reasons like a rerun of a failed job may be on run attempt 2, but fetching
artifacts from a job dependency that succeeded on attempt 1 and therefore did
not rerun and recreate the artifacts indexed by the new attempt.

## Labels

The GitHub Actions Runners are identified with
[labels](https://docs.github.com/en/enterprise-cloud@latest/actions/hosting-your-own-runners/using-labels-with-self-hosted-runners)
that indicate properties of the runner. Some of the labels are automatically
generated from information about the runner on startup, such as its GCP zone and
hostname, others match GitHub's standard labels, like the OS, and some are
injected as custom labels via metadata, like whether the VM is optimized for CPU
or GPU usage. All self-hosted runners receive the `self-hosted` label.

Note that when setting where a job runs, any runner that has all the specified
labels can pick up a job. So if you leave off the runner-group, for instance,
the job will non-deterministically try to run on presubmit or postsubmit
runners. We do not currently have a solution for this problem other than careful
code authorship and review.

## Examining Runners

The runners for openxla can be viewed in the
[GitHub UI](https://github.com/organizations/openxla/settings/actions/runners).
Unfortunately, only organization admins have access to this page. Organization
admin gives very broad privileges, so this set is necessarily kept very small by
Google security policy.

 ## Updating the Runners

We frequently need to update the runner instances. In particular, after a Runner
release, the version of the program running on the runners must be updated
[within 30 days](https://docs.github.com/en/enterprise-cloud@latest/actions/hosting-your-own-runners/autoscaling-with-self-hosted-runners#controlling-runner-software-updates-on-self-hosted-runners),
otherwise the GitHub control plane will refuse their connection. Testing and
rolling out these updates involves a few steps.

For updating the runner version in particular, you can use
[`update_runner_version.py`](./gcp/update_runner_version.py) and skip deployment
to test runners, going straight to a prod canary.

### MIG Rolling Updates

See https://cloud.google.com/compute/docs/instance-groups/updating-migs for the
main documentation. There are two modes for a rolling MIG update, "proactive"
and "opportunistic" (AKA "selective"). There are also three different actions
the MIG can take to update an instance: "refresh", "restart", and "replace". A
"refresh" update only allows updating instance metadata or adding extra disks,
but is mostly safe to run as a "proactive" update. In our case, instances will
pick up changes to the startup script when they restart naturally. If you need
to change something like the boot disk image, you need to do a replacement of
the VM, but in this case a "proactive" update is not safe because it would shut
down the VM even if it was in the middle of running a job. In an "opportunistic"
update, the MIG is *supposed* to apply the update when the instances are
created, but it *doesn't* apply updates if it's recreating an instance deemed
"unhealthy", which includes if the instance shuts itself down or fails its
health check. There is also a restriction that you can have only one
"in-progress" update at a time. This can lead to some weird states where
instances are bootlooping and you can't update them. In this case, you can
manually delete the misbehaving instances and try to get back to everything on a
good version.

In general, the recommended approach (which the scripting defaults to) is to do
updates as opportunistic VM replacement. With refresh, a running VM can end up
with a mismatch between the template it says it's using and commit it's actually
configured from, which makes it difficult to track rollout state. The speed of
refresh updates is a bit of a false one, as for the update to fully take affect
for anything that happens as part of the startup script (which is basically
everything, in our case) the VM has to restart anyway.

Proactive updates can be slow because VMs generally only get deleted when they
complete a job. To speed them along, you can use
[`remove_idle_runners.sh`](./gcp/remove_idle_runners.sh) to relatively safely
bring down instances that aren't currently processing a job.

### Test Runners

We have groups of testing runners (tagged with the `environment=testing` label),
that can be used to deploy new runner configurations and can be tested by
targeting jobs using the label. Create templates using the
[`create_templates.sh`](./gcp/create_templates.sh) script, overriding the
`TEMPLATE_CONFIG_REPO` and/or `TEMPLATE_CONFIG_REF` environment variables to
point to your new configurations. The autoscaling configuration for the testing
group usually has both min and max replicas set to 0, so there aren't any
instances running. Update the configuration to something appropriate for your
testing (probably something like 1-10) using
[`update_autoscaling.sh`](./gcp/update_autoscaling.sh):

```shell
build_tools/github_actions/runner/gcp/update_autoscaling.sh \
  github-runner-testing-presubmit-cpu-us-west1 us-west1 1 10
```

Update the testing instance group to your new template using
[`update_instance_groups.py`](./gcp/update_instance_groups.py) (no need to
canary to the test group):

```shell
build_tools/github_actions/runner/gcp/update_instance_groups.py direct-update \
  --env=testing --region=all --group=all --type=all --version="${VERSION?}"
```

Check that your runners successfully start up and register with the GitHub UI.
Then send a PR or trigger a workflow dispatch (depending on what you're testing)
targeting the testing environment, and ensure that your new runners work. Send
and merge a PR updating the runner configuration. When you're done, make sure to
set the testing group autoscaling back to 0-0.

```shell
build_tools/github_actions/runner/gcp/update_autoscaling.sh \
  github-runner-testing-presubmit-cpu-us-west1 us-west1 0 0
```

You'll also need to delete the remaining runners because without jobs to
process, they will never delete themselves.

```shell
build_tools/github_actions/runner/gcp/remove_idle_runners.sh \
  testing-presubmit cpu us-west1
```

### Deploy to Prod

Since the startup script used by the runners references a specific commit,
merging the PR will not immediately affect them. Note that this means that any
changes you make need to be forward and backward compatible with changes to
anything that is picked up directly from tip of tree (such as workflow files).
These should be changed in separate PRs.

To deploy to prod, create new prod templates. Then use the update script to
canary to a single instance:

```shell
build_tools/github_actions/runner/gcp/update_instance_groups.py canary \
  --env=prod --region=all --group=all --type=all --version="${VERSION}"
```

Watch to make sure that your new runners are starting up and registering as
expected and there aren't any additional failures. It is probably best to wait
on the order of days before proceeding. When you are satisfied that your new
configuration is good, complete the update with your new template:

```shell
build_tools/github_actions/runner/gcp/update_instance_groups.py promote-canary \
  --env=prod --region=all --group=all --type=all
```

## Known Issues / Future Work

There are number of known issues and areas of improvement for the runners:

- The only autoscaling currently uses CPU usage (the default), which does not
  work at all for GPU-based runners. The GPU groups are set with minimum and
  maximum autoscaling size set to the same value (this is slightly different
  from being set to a fixed value for detailed reasons that I won't go into). We
  need to set up autoscaling based on
  [GitHub's job queueing webhooks](https://docs.github.com/en/enterprise-cloud@latest/actions/hosting-your-own-runners/autoscaling-with-self-hosted-runners#using-webhooks-for-autoscaling).
- MIG autoscaling has the option to scale groups up and down. We currently have
  it set to only scale up. When scaling down, the autoscaler just sends a
  shutdown signal to the instance and it has
  [90 seconds to run a shutdown script](https://cloud.google.com/compute/docs/shutdownscript),
  but can't complete a long-running build. There is no functionality to send a
  gentle shutdown signal. This is especially problematic given that we only have
  CPU-usage based autoscaling at the moment because this is an imperfect measure
  and in particular decides that an instance is idle if it is doing IO (e.g.
  uploading artifacts). Job queue based autoscaling would probably help, but the
  same problem would exist. To get around this, we have runners delete
  themselves by making a delete call on the MIG via a custom
  [Cloud Functions proxy](./instance_deleter) that gives only self-deletion
  permissions. This isn't a full substitute for autoscaling down because it
  means that after scaling up all the instances will hang around if there isn't
  any work. Some prototype code had the instances check the autoscaler target at
  intervals and delete themselves, but it caused instability when rolled out.