# Copyright 2019 The IREE Authors
#
# Licensed under the Apache License v2.0 with LLVM Exceptions.
# See https://llvm.org/LICENSE.txt for license information.
# SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception

cmake_minimum_required(VERSION 3.21...3.24)

# LLVM requires CMP0116 for tblgen: https://reviews.llvm.org/D101083
# CMP0116: Ninja generators transform `DEPFILE`s from `add_custom_command()`
# New in CMake 3.20. https://cmake.org/cmake/help/latest/policy/CMP0116.html
set(CMAKE_POLICY_DEFAULT_CMP0116 OLD)
if(POLICY CMP0116)
  cmake_policy(SET CMP0116 OLD)
endif()

set(CMAKE_EXPORT_COMPILE_COMMANDS ON)

project(IREE ASM C CXX)
set(CMAKE_C_STANDARD 11)
set(CMAKE_CXX_STANDARD 17)
# LLVM defines this as a CACHE property and uses a policy that causes the
# cache value to take precedence. This is causing us to mix 17/14 across
# the boundary.
# TODO: Remove this once the LLVM mechanism is updated. See:
#   https://discourse.llvm.org/t/important-new-toolchain-requirements-to-build-llvm-will-most-likely-be-landing-within-a-week-prepare-your-buildbots/61447/9
set(CMAKE_CXX_STANDARD 17 CACHE STRING "C++ standard to conform to" FORCE)
set(IREE_IDE_FOLDER IREE)
set_property(GLOBAL PROPERTY USE_FOLDERS ON)

if(MSVC)
  enable_language(ASM_MASM)
else()
  enable_language(ASM)
endif()

# Set the default CMake build type so some of the build type dependent setting
# in the submodules and functions (IREE assertion) can be set properly.
set(DEFAULT_CMAKE_BUILD_TYPE "Release")
if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
  message(STATUS "No build type selected, default to ${DEFAULT_CMAKE_BUILD_TYPE}")
  set(CMAKE_BUILD_TYPE "${DEFAULT_CMAKE_BUILD_TYPE}" CACHE STRING "Build type (default ${DEFAULT_CMAKE_BUILD_TYPE})" FORCE)
endif()

include(CMakeDependentOption)

#-------------------------------------------------------------------------------
# Project component configuration
#-------------------------------------------------------------------------------

option(IREE_ENABLE_RUNTIME_TRACING "Enables instrumented runtime tracing." OFF)
option(IREE_ENABLE_COMPILER_TRACING "Enables instrumented compiler tracing." OFF)
option(IREE_ENABLE_RENDERDOC_PROFILING "Enables profiling HAL devices with the RenderDoc tool." OFF)
option(IREE_ENABLE_THREADING "Builds IREE in with thread library support." ON)
option(IREE_ENABLE_CLANG_TIDY "Builds IREE in with clang tidy enabled on IREE's libraries." OFF)

# TODO(#8469): remove the dependency on cpuinfo entirely.
option(IREE_ENABLE_CPUINFO "Enables runtime use of cpuinfo for processor topology detection." ON)

option(IREE_BUILD_COMPILER "Builds the IREE compiler." ON)
option(IREE_BUILD_TESTS "Builds IREE unit tests." ON)
option(IREE_BUILD_DOCS "Builds IREE docs." OFF)
option(IREE_BUILD_SAMPLES "Builds IREE sample projects." ON)
option(IREE_BUILD_PYTHON_BINDINGS "Builds the IREE python bindings" OFF)
option(IREE_BUILD_TRACY "Builds tracy server tools." OFF)
option(IREE_BUILD_BUNDLED_LLVM "Builds the bundled llvm-project (vs using installed)" ON)

option(IREE_BYTECODE_MODULE_FORCE_LLVM_SYSTEM_LINKER "Use the system linker when generating IREE modules in tests/samples/benchmarks (useful for Tracy)." OFF)

# Properties controlling version and naming of release artifacts.
set(IREE_RELEASE_PACKAGE_SUFFIX "" CACHE STRING "Suffix to append to distributed package names")
set(IREE_RELEASE_VERSION "0.1a1" CACHE STRING "Version to embed in distributed packages")
set(IREE_RELEASE_REVISION "HEAD" CACHE STRING "Version control revision information to embed in distributed packages")
option(IREE_EMBED_RELEASE_INFO "Embed the IREE version information in built artifacts." OFF)

# Using already built host binaries, such as for cross-compilation.
set(IREE_HOST_BIN_DIR_DEFAULT "")
if(IREE_HOST_BINARY_ROOT)
  message(WARNING "IREE_HOST_BINARY_ROOT is deprecated. Use IREE_HOST_BIN_DIR"
                  " pointing directly to the directory containing binaries"
                  " instead.")
  set(IREE_HOST_BIN_DIR_DEFAULT "${IREE_HOST_BINARY_ROOT}/bin")
endif()
set(IREE_HOST_BIN_DIR "${IREE_HOST_BIN_DIR_DEFAULT}" CACHE STRING "Path to directory containing IREE binary tools to use instead of building them from source.")

option(IREE_BUILD_BINDINGS_TFLITE "Builds the IREE TFLite C API compatibility shim" ON)
option(IREE_BUILD_BINDINGS_TFLITE_JAVA "Builds the IREE TFLite Java bindings with the C API compatibility shim" ON)

# Properties building and controlling benchmark suites.
# Leave the old name around for a bit so that people can update their configs
# and previous cached values will automatically carry over.
# TODO(pzread): Remove this option after 2023-04-13
option(IREE_BUILD_BENCHMARKS "DEPRECATED alias for IREE_BUILD_LEGACY_BENCHMARKS" OFF)
option(IREE_BUILD_LEGACY_BENCHMARKS "Builds legacy IREE benchmark suites." "${IREE_BUILD_BENCHMARKS}")
cmake_dependent_option(IREE_ENABLE_COMPILATION_BENCHMARKS "DEPRECATED alias for IREE_ENABLE_LEGACY_COMPILATION_BENCHMARKS" OFF "${IREE_BUILD_BENCHMARKS}" OFF)
cmake_dependent_option(
  IREE_ENABLE_LEGACY_COMPILATION_BENCHMARKS
  "Builds legacy IREE benchmark suites for compilation statistics."
  # Read the value from the old name as fallback so people can update their configs.
  "${IREE_ENABLE_COMPILATION_BENCHMARKS}"
  # Only available if IREE_BUILD_LEGACY_BENCHMARKS is set (or by IREE_BUILD_BENCHMARKS transitively).
  "${IREE_BUILD_LEGACY_BENCHMARKS}"
  OFF
)

option(IREE_BUILD_MICROBENCHMARKS "Builds IREE microbenchmark suites." OFF)

# Leave the old name around for a bit so that people can update their configs
# and previous cached values will automatically carry over.
# TODO(pzread): Remove this option after 2023-04-01
option(IREE_BUILD_EXPERIMENTAL_E2E_TEST_ARTIFACTS "DEPRECATED alias for IREE_BUILD_E2E_TEST_ARTIFACTS" OFF)
option(IREE_BUILD_E2E_TEST_ARTIFACTS "Builds IREE E2E test artifacts suite generated by the e2e test framework." "${IREE_BUILD_EXPERIMENTAL_E2E_TEST_ARTIFACTS}")

# For development, builds LLVM (and in the future) the whole compiler as
# individual shared libraries similar to if passing -DBUILD_SHARED_LIBS=ON
# to a standalone LLVM build. This can dramatically reduce linking time and
# makes the management of some dependencies more strict.
# This option is considered experimental and should not be relied on until
# CI coverage is established.
option(IREE_COMPILER_BUILD_SHARED_LIBS "Enables BUILD_SHARED_LIBS CMake mode for LLVM and the compiler (this is only suitable for development)" OFF)

# Must be defined as an option (CMake does not do it automatically), even though
# we override it for different parts of the tree.
# This option is considered experimental and should not be relied on until
# CI coverage is established.
option(BUILD_SHARED_LIBS "Instructs CMake to build libraries as shared if possible" OFF)

#-------------------------------------------------------------------------------
# IREE command-line tooling configuration
#-------------------------------------------------------------------------------

# External user modules linked into IREE tooling (iree-run-module/etc).
# These are only available in the internal IREE tools and here for testing
# custom modules in standard workflows. This is not a deployment mechanism and
# users integrating IREE into their libraries or applications will need to
# manage the building and registering/resolving the modules themselves.
#
# See runtime/src/iree/tooling/modules/CMakeLists.txt for more information on
# how to declare external modules.
set(IREE_EXTERNAL_TOOLING_MODULES "" CACHE STRING "")

#-------------------------------------------------------------------------------
# Compiler plugins
# IREE compiler plugins can be statically built into the compiler by adding
# directories to IREE_COMPILER_PLUGIN_PATHS. If directories are relative, they
# are interpreted against the IREE source directory.
#
# In addition, certain in-tree plugin directories are included regardless of
# this variable (possibly based on other flags).
#
# A plugin directory must contain an iree_compiler_plugin_group.cmake file that
# is loaded and must specify:
#   - any needed add_subdirectory() calls to populate targets.
#   - iree_compiler_register_plugin() targets (either directly or transitively)
#     which associates a plugin id with a registration target.
#
# All iree_compiler_plugin_group.cmake files are included from the binary
# directory ${IREE_BINARY_DIR}/compiler/plugins and must create a sub binary
# directory that is globally unique. It is recommended to prefix with org
# name or project. The following names are reserved:
#   - builtin
#   - samples
#
# Example:
#   add_subdirectory(${CMAKE_CURRENT_LIST_DIR}/example samples/example)
#-------------------------------------------------------------------------------

set(IREE_COMPILER_PLUGIN_PATHS "" CACHE STRING "Paths to external compiler plugins")
set(IREE_COMPILER_BUILTIN_PLUGIN_PATHS "compiler/plugins")
if(IREE_BUILD_SAMPLES)
  list(APPEND IREE_COMPILER_BUILTIN_PLUGIN_PATHS "samples/compiler_plugins")
endif()

#-------------------------------------------------------------------------------
# Experimental project flags
#-------------------------------------------------------------------------------

option(IREE_BUILD_EXPERIMENTAL_CPU_UKERNEL_PLUGINS "Build experimental plugins making builtin ukernels available to llvm-cpu modules compiled with --iree-llvmcpu-enable-microkernels" OFF)
option(IREE_BUILD_EXPERIMENTAL_WEB_SAMPLES "Builds experimental web samples." OFF)

#-------------------------------------------------------------------------------
# CUDA Toolkit.
#
# Using the (optional) CUDA support in the compiler and runtime requires the
# NVIDIA CUDA Toolkit. The toolkit can either be installed ahead of time or
# it can be automatically downloaded on certain host architectures.
#-------------------------------------------------------------------------------

set(IREE_CUDA_AVAILABLE OFF)
find_package(CUDAToolkit)
if(CUDAToolkit_FOUND)
  set(IREE_CUDA_AVAILABLE ON)
else()
  # We can download the SDK in build_tools/third_party/cuda/CMakeLists.txt, if
  # on a supported platform/arch.
  if(CMAKE_SYSTEM_NAME STREQUAL "Linux" OR WIN32)
    if(CMAKE_HOST_SYSTEM_PROCESSOR MATCHES "(x86_64)|(AMD64|amd64)")
      set(IREE_CUDA_AVAILABLE ON)
    endif()
  endif()
endif()

#-------------------------------------------------------------------------------
# Runtime HAL Driver Options
# By default, all runtime drivers supported by the current platform which do
# not require external deps are enabled by default. This can be changed with:
#   -DIREE_HAL_DRIVER_DEFAULTS=OFF
#-------------------------------------------------------------------------------

# External HAL drivers; see runtime/src/iree/hal/drivers/CMakeLists.txt for more
# information on how to declare external drivers.
set(IREE_EXTERNAL_HAL_DRIVERS "" CACHE STRING "")

# Additional executable loader deps to add dependent libraries to any target
# using the default executable loader registration utilities.
# TODO(benvanik): extend the deps to encompass the built-in loaders too so that
# we have one flag. We could also support a list of deps and automatically
# generate the registration from that via a configure file.
set(IREE_HAL_EXECUTABLE_LOADER_EXTRA_DEPS "" CACHE STRING "")

# Additional executable import provider deps to add dependent libraries to any
# target using the default executable import registration utilities.
# TODO(benvanik): extend the deps to encompass the built-in imports too so that
# we have one flag. We could also support a list of deps and automatically
# generate the registration from that via a configure file.
set(IREE_HAL_EXECUTABLE_PLUGIN_EXTRA_DEPS "" CACHE STRING "")

option(IREE_HAL_DRIVER_DEFAULTS "Sets the default value for all runtime HAL drivers" ON)

# CUDA support is enabled by default if the platform supports the CUDA SDK and
# not cross compiling. Note: a CUDA-compatible GPU with drivers is still
# required to actually run CUDA workloads.
set(IREE_HAL_DRIVER_CUDA_DEFAULT ${IREE_HAL_DRIVER_DEFAULTS})
if(NOT IREE_CUDA_AVAILABLE OR CMAKE_CROSSCOMPILING)
  set(IREE_HAL_DRIVER_CUDA_DEFAULT OFF)
endif()

# Vulkan support is enabled by default if the platform might support Vulkan.
# Apple platforms support Metal instead of Vulkan, though MoltenVK may work.
set(IREE_HAL_DRIVER_VULKAN_DEFAULT ${IREE_HAL_DRIVER_DEFAULTS})
if(APPLE)
  set(IREE_HAL_DRIVER_VULKAN_DEFAULT OFF)
endif()

option(IREE_HAL_DRIVER_CUDA "Enables the 'cuda' runtime HAL driver" ${IREE_HAL_DRIVER_CUDA_DEFAULT})
option(IREE_HAL_DRIVER_LOCAL_SYNC "Enables the 'local-sync' runtime HAL driver" ${IREE_HAL_DRIVER_DEFAULTS})
option(IREE_HAL_DRIVER_LOCAL_TASK "Enables the 'local-task' runtime HAL driver" ${IREE_HAL_DRIVER_DEFAULTS})
option(IREE_HAL_DRIVER_VULKAN "Enables the 'vulkan' runtime HAL driver" ${IREE_HAL_DRIVER_VULKAN_DEFAULT})

option(IREE_HAL_EXECUTABLE_LOADER_DEFAULTS "Sets the default value for all runtime HAL executable loaders" ON)
set(IREE_HAL_EXECUTABLE_LOADER_EMBEDDED_ELF_DEFAULT ${IREE_HAL_EXECUTABLE_LOADER_DEFAULTS})
set(IREE_HAL_EXECUTABLE_LOADER_SYSTEM_LIBRARY_DEFAULT ${IREE_HAL_EXECUTABLE_LOADER_DEFAULTS})
set(IREE_HAL_EXECUTABLE_LOADER_VMVX_MODULE_DEFAULT ${IREE_HAL_EXECUTABLE_LOADER_DEFAULTS})

option(IREE_HAL_EXECUTABLE_PLUGIN_DEFAULTS "Sets the default value for all runtime HAL executable plugin mechanisms" ON)
set(IREE_HAL_EXECUTABLE_PLUGIN_EMBEDDED_ELF_DEFAULT ${IREE_HAL_EXECUTABLE_PLUGIN_DEFAULTS})
set(IREE_HAL_EXECUTABLE_PLUGIN_SYSTEM_LIBRARY_DEFAULT ${IREE_HAL_EXECUTABLE_PLUGIN_DEFAULTS})

# Emscripten builds don't support embedded ELF libraries.
if(EMSCRIPTEN)
  set(IREE_HAL_EXECUTABLE_LOADER_EMBEDDED_ELF_DEFAULT OFF)
  set(IREE_HAL_EXECUTABLE_PLUGIN_EMBEDDED_ELF_DEFAULT OFF)
endif()

# If forcing system libraries (for TSAN/debugging tools/etc) then ensure the
# system library loader is linked in.
if(IREE_BYTECODE_MODULE_FORCE_LLVM_SYSTEM_LINKER)
  set(IREE_HAL_EXECUTABLE_LOADER_SYSTEM_LIBRARY_DEFAULT ON)
  set(IREE_HAL_EXECUTABLE_PLUGIN_SYSTEM_LIBRARY_DEFAULT ON)
endif()

# If no local driver is enabled then we force all the loaders/imports off; this
# allows for simpler checks that don't need to see if both the driver and
# feature is available.
if(NOT IREE_HAL_DRIVER_LOCAL_SYNC AND NOT IREE_HAL_DRIVER_LOCAL_TASK)
  set(IREE_HAL_EXECUTABLE_LOADER_EMBEDDED_ELF_DEFAULT OFF)
  set(IREE_HAL_EXECUTABLE_LOADER_SYSTEM_LIBRARY_DEFAULT OFF)
  set(IREE_HAL_EXECUTABLE_LOADER_VMVX_MODULE_DEFAULT OFF)
  set(IREE_HAL_EXECUTABLE_PLUGIN_EMBEDDED_ELF_DEFAULT OFF)
  set(IREE_HAL_EXECUTABLE_PLUGIN_SYSTEM_LIBRARY_DEFAULT OFF)
endif()

option(IREE_HAL_EXECUTABLE_LOADER_EMBEDDED_ELF "Enables the embedded dynamic library loader for local HAL drivers" ${IREE_HAL_EXECUTABLE_LOADER_EMBEDDED_ELF_DEFAULT})
option(IREE_HAL_EXECUTABLE_LOADER_SYSTEM_LIBRARY "Enables the system dynamic library loader for local HAL drivers" ${IREE_HAL_EXECUTABLE_LOADER_SYSTEM_LIBRARY_DEFAULT})
option(IREE_HAL_EXECUTABLE_LOADER_VMVX_MODULE "Enables the VMVX module loader for local HAL drivers" ${IREE_HAL_EXECUTABLE_LOADER_VMVX_MODULE_DEFAULT})

option(IREE_HAL_EXECUTABLE_PLUGIN_EMBEDDED_ELF "Enables the embedded dynamic library plugin mechanism for local HAL drivers" ${IREE_HAL_EXECUTABLE_PLUGIN_EMBEDDED_ELF_DEFAULT})
option(IREE_HAL_EXECUTABLE_PLUGIN_SYSTEM_LIBRARY "Enables the system dynamic library plugin mechanism for local HAL drivers" ${IREE_HAL_EXECUTABLE_PLUGIN_SYSTEM_LIBRARY_DEFAULT})

if(IREE_BUILD_COMPILER)
  # The compiler requires the local task driver with the VMVX loader.
  set(IREE_HAL_DRIVER_LOCAL_TASK ON)
  set(IREE_HAL_EXECUTABLE_LOADER_VMVX_MODULE ON)
endif()

message(STATUS "IREE HAL drivers:")
if(IREE_HAL_DRIVER_CUDA)
  message(STATUS "  - cuda")
endif()
if(IREE_HAL_DRIVER_LOCAL_SYNC)
  message(STATUS "  - local-sync")
endif()
if(IREE_HAL_DRIVER_LOCAL_TASK)
  message(STATUS "  - local-task")
endif()
if(IREE_HAL_DRIVER_VULKAN)
  message(STATUS "  - vulkan")
endif()
if(IREE_EXTERNAL_HAL_DRIVERS)
  message(STATUS "  + external: ${IREE_EXTERNAL_HAL_DRIVERS}")
endif()

message(STATUS "IREE HAL local executable library loaders:")
if(IREE_HAL_EXECUTABLE_LOADER_EMBEDDED_ELF)
  message(STATUS "  - embedded-elf")
endif()
if(IREE_HAL_EXECUTABLE_LOADER_SYSTEM_LIBRARY)
  message(STATUS "  - system-library")
endif()
if(IREE_HAL_EXECUTABLE_LOADER_VMVX_MODULE)
  message(STATUS "  - vmvx-module")
endif()

message(STATUS "IREE HAL local executable plugin mechanisms:")
if(IREE_HAL_EXECUTABLE_PLUGIN_EMBEDDED_ELF)
  message(STATUS "  - embedded-elf")
endif()
if(IREE_HAL_EXECUTABLE_PLUGIN_SYSTEM_LIBRARY)
  message(STATUS "  - system-library")
endif()

#-------------------------------------------------------------------------------
# Experimental ROCM HAL driver
#-------------------------------------------------------------------------------

set(IREE_EXTERNAL_ROCM_HAL_DRIVER_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/experimental/rocm")
set(IREE_EXTERNAL_ROCM_HAL_DRIVER_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}/experimental/rocm")
set(IREE_EXTERNAL_ROCM_HAL_DRIVER_TARGET "iree::experimental::rocm::registration")
set(IREE_EXTERNAL_ROCM_HAL_DRIVER_REGISTER "iree_hal_rocm_driver_module_register")

#-------------------------------------------------------------------------------
# Compiler Target Options
# By default, all compiler targets supported by the current platform are
# enabled. Some compiler targets like CUDA will install external deps as
# needed at configure time. This can be changed with:
#   -DIREE_TARGET_BACKEND_DEFAULTS=OFF
#-------------------------------------------------------------------------------

option(IREE_TARGET_BACKEND_DEFAULTS "Sets the default value for all compiler target backends" ON)

# The VMVX backend is always enabled.
cmake_dependent_option(IREE_TARGET_BACKEND_VMVX "Enables the 'vmvx' compiler target backend" ON ${IREE_BUILD_COMPILER} OFF)

# Supported default target backends.
cmake_dependent_option(IREE_TARGET_BACKEND_LLVM_CPU "Enables the 'llvm-cpu' compiler target backend" ${IREE_TARGET_BACKEND_DEFAULTS} ${IREE_BUILD_COMPILER} OFF)
cmake_dependent_option(IREE_TARGET_BACKEND_LLVM_CPU_WASM "Enables WebAssembly in the 'llvm-cpu' compiler target backend" ${IREE_TARGET_BACKEND_DEFAULTS} ${IREE_TARGET_BACKEND_LLVM_CPU} OFF)
cmake_dependent_option(IREE_TARGET_BACKEND_METAL_SPIRV "Enables the 'metal-spirv' compiler target backend" ${IREE_TARGET_BACKEND_DEFAULTS} ${IREE_BUILD_COMPILER} OFF)
cmake_dependent_option(IREE_TARGET_BACKEND_VULKAN_SPIRV "Enables the 'vulkan-spirv' compiler target backend" ${IREE_TARGET_BACKEND_DEFAULTS} ${IREE_BUILD_COMPILER} OFF)

# Supported default target backends that are only available on certain
# platforms.
set(IREE_TARGET_BACKEND_CUDA_DEFAULT ${IREE_TARGET_BACKEND_DEFAULTS})
if(NOT IREE_CUDA_AVAILABLE)
  set(IREE_TARGET_BACKEND_CUDA_DEFAULT OFF)
endif()
cmake_dependent_option(IREE_TARGET_BACKEND_CUDA "Enables the 'cuda' compiler target backend" ${IREE_TARGET_BACKEND_CUDA_DEFAULT} ${IREE_BUILD_COMPILER} OFF)

# Non-default target backends either have additional dependencies or are
# experimental/niche in some fashion.
cmake_dependent_option(IREE_TARGET_BACKEND_ROCM "Enables the 'rocm' compiler target backend" OFF ${IREE_BUILD_COMPILER} OFF)
# Disable WebGPU by default - it has complex deps and is under development.
cmake_dependent_option(IREE_TARGET_BACKEND_WEBGPU "Enables the 'webgpu' compiler target backend" OFF ${IREE_BUILD_COMPILER} OFF)

#-------------------------------------------------------------------------------
# Compiler Input Dialects
#-------------------------------------------------------------------------------

cmake_dependent_option(IREE_INPUT_MHLO "Builds support for compiling MHLO programs" ON ${IREE_BUILD_COMPILER} OFF)
cmake_dependent_option(IREE_INPUT_TORCH "Builds support for compiling Torch MLIR programs" ON ${IREE_BUILD_COMPILER} OFF)
cmake_dependent_option(IREE_INPUT_TOSA "Builds support for compiling TOSA programs" ON ${IREE_BUILD_COMPILER} OFF)

if(IREE_BUILD_COMPILER)
  message(STATUS "IREE compiler input dialects:")
  if(IREE_INPUT_MHLO)
    message(STATUS "  - MHLO")
  endif()
  if(IREE_INPUT_TORCH)
    message(STATUS "  - Torch MLIR")
  endif()
  if(IREE_INPUT_TOSA)
    message(STATUS "  - TOSA")
  endif()
endif()

#-------------------------------------------------------------------------------
# Compiler Output Formats
#-------------------------------------------------------------------------------

cmake_dependent_option(IREE_OUTPUT_FORMAT_C "Enables the 'vm-c' output format, using MLIR EmitC" ON ${IREE_BUILD_COMPILER} OFF)

if(IREE_BUILD_COMPILER)
  message(STATUS "IREE compiler output formats:")
  if(IREE_OUTPUT_FORMAT_C)
    message(STATUS "  - 'vm-c': textual C source module")
  endif()
  # The 'vm-bytecode' and 'vm-asm' formats are always enabled.
  message(STATUS "  - 'vm-bytecode': VM bytecode")
  message(STATUS "  - 'vm-asm': VM MLIR assembly")
endif()

#-------------------------------------------------------------------------------
# IREE compilation toolchain configuration
#-------------------------------------------------------------------------------

option(IREE_ENABLE_ASAN "Enable address sanitizer" OFF)
option(IREE_ENABLE_MSAN "Enable memory sanitizer" OFF)
option(IREE_ENABLE_TSAN "Enable thread sanitizer" OFF)
option(IREE_BYTECODE_MODULE_ENABLE_TSAN "Enable thread sanitizer in IREE modules in tests" OFF)
option(IREE_ENABLE_UBSAN "Enable undefined behavior sanitizer" OFF)
option(IREE_ENABLE_SPLIT_DWARF "Enable gsplit-dwarf for debug information if the platform supports it" OFF)
option(IREE_ENABLE_THIN_ARCHIVES "Enables thin ar archives (elf systems only). Disable for released static archives" OFF)
option(IREE_LINK_COMPILER_SHARED_LIBRARY "Links IREE tools using the compiler compiled into a shared library" ON)

# STREQUAL feels wrong here - we don't care about the exact true-value used,
# ON or TRUE or something else. But we haven't been able to think of a less bad
# alternative. https://github.com/openxla/iree/pull/8474#discussion_r840790062
if(NOT IREE_ENABLE_TSAN STREQUAL IREE_BYTECODE_MODULE_ENABLE_TSAN)
  message(SEND_ERROR
      "IREE_ENABLE_TSAN and IREE_BYTECODE_MODULE_ENABLE_TSAN must be "
      "simultaneously ON or OFF. "
      "A discrepancy between the two would cause tests to crash as IREE "
      "runtime code (controlled by IREE_ENABLE_TSAN) calls into test IREE "
      "modules (controlled by IREE_BYTECODE_MODULE_ENABLE_TSAN)")
endif()

if(IREE_BYTECODE_MODULE_ENABLE_TSAN)
  if(NOT IREE_BYTECODE_MODULE_FORCE_LLVM_SYSTEM_LINKER)
    message(SEND_ERROR
        "When IREE_BYTECODE_MODULE_ENABLE_TSAN is ON, "
        "IREE_BYTECODE_MODULE_FORCE_LLVM_SYSTEM_LINKER must also be ON. "
        "TSAN instrumentation is not currently supported in embedded modules.")
  endif()
endif()

if(IREE_LINK_COMPILER_SHARED_LIBRARY AND IREE_ENABLE_COMPILER_TRACING)
  message(SEND_ERROR
      "IREE_ENABLE_COMPILER_TRACING requires "
      "-DIREE_LINK_COMPILER_SHARED_LIBRARY=OFF (the compiler library must not "
      "be unloaded before Tracy finishes, static linking is one workaround)")
endif()

option(IREE_ENABLE_CCACHE
    "[DEPRECATED: Use CMAKE_<LANG>_COMPILER_LAUNCHER configure options or environment variables instead.] Use ccache if installed."
    OFF)

if(IREE_ENABLE_CCACHE)
  message(WARNING
      "IREE_ENABLE_CCACHE is deprecated. Use CMAKE_<LANG>_COMPILER_LAUNCHER"
      " configure options or environment variables instead.")
  find_program(CCACHE_PROGRAM ccache)
  if(CCACHE_PROGRAM)
      set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE "${CCACHE_PROGRAM}")
  else()
    message(SEND_ERROR
        "IREE_ENABLE_CCACHE was set, but executable `ccache` was not found.")
  endif()
endif()

option(IREE_DEV_MODE "Configure settings to optimize for IREE development (as opposed to CI or release)" OFF)

#-------------------------------------------------------------------------------
# IREE assertions
# We don't love the way this is done, but we have to line it up with how LLVM
# does it and not diverge, since all implementations and all header users must
# have the same definition of NDEBUG.
#
# LLVM defaults LLVM_ENABLE_ASSERTIONS to ON for Debug builds only but then
# conditions itself to only update flags if not building Debug. We just let
# IREE_ENABLE_ASSERTIONS be not conditioned on anything and only update the
# flags in appropriate build types.
#
# If IREE_ENABLE_ASSERTIONS is set ON manually, then
#   - NDEBUG must be undefined
#   - LLVM_ENABLE_ASSERTIONS is forced off in order to keep multiple parties
#     from mucking with globals.
#
# Since CMake forces NDEBUG for !Debug builds, some surgery needs to be done
# at the top level to avoid divergence.
#-------------------------------------------------------------------------------

option(IREE_ENABLE_ASSERTIONS "Force unset of NDEBUG compile option" OFF)

# Filter -DNDEBUG from CMAKE_CXX_FLAGS_* and CMAKE_C_FLAGS_* (if
# CMAKE_BUILD_TYPE is not Debug).
function(iree_fix_ndebug)
  string(TOUPPER "${CMAKE_BUILD_TYPE}" _UPPERCASE_CMAKE_BUILD_TYPE)
  if(IREE_ENABLE_ASSERTIONS AND NOT "${_UPPERCASE_CMAKE_BUILD_TYPE}" STREQUAL "DEBUG")
      # Also remove /D NDEBUG to avoid MSVC warnings about conflicting defines.
      foreach(_FLAGS_VAR_TO_SCRUB
              CMAKE_CXX_FLAGS_${_UPPERCASE_CMAKE_BUILD_TYPE}
              CMAKE_C_FLAGS_${_UPPERCASE_CMAKE_BUILD_TYPE})
          set(_ORIGINAL_FLAGS "${${_FLAGS_VAR_TO_SCRUB}}")
          string(REGEX REPLACE "(^| )[/-]D *NDEBUG($| )" " " _ALTERED_FLAGS "${_ORIGINAL_FLAGS}")
          if(NOT "${_ORIGINAL_FLAGS}" STREQUAL "${_ALTERED_FLAGS}")
            message(STATUS
              "IREE_ENABLE_ASSERTIONS force disabled NDEBUG for ${_FLAGS_VAR_TO_SCRUB}: '${_ORIGINAL_FLAGS}' -> '${_ALTERED_FLAGS}'")
            set(${_FLAGS_VAR_TO_SCRUB} "${_ALTERED_FLAGS}" PARENT_SCOPE)
          endif()
      endforeach()

      # Make sure that LLVM doesn't add its own logic for assertion disabling.
      # We'd like to make sure that we are not dueling over globals.
      set(LLVM_ENABLE_ASSERTIONS OFF PARENT_SCOPE)
  endif()
endfunction()
iree_fix_ndebug()

#-------------------------------------------------------------------------------
# IREE utility definitions
#-------------------------------------------------------------------------------

list(APPEND CMAKE_MODULE_PATH
  ${CMAKE_CURRENT_LIST_DIR}/build_tools/cmake/
)

include(iree_macros)
include(iree_copts)
include(iree_cc_binary)
include(iree_cc_library)
include(iree_cc_test)
include(iree_compiler_plugin)
include(iree_import_binary)
include(iree_external_cmake_options)
include(iree_tablegen_library)
include(iree_tablegen_doc)
include(iree_c_embed_data)
include(iree_bitcode_library)
include(iree_bytecode_module)
include(iree_c_module)
include(iree_python)
include(iree_lit_test)
include(iree_llvm)
include(iree_add_all_subdirs)
include(iree_check_test)
include(iree_trace_runner_test)
include(iree_native_test)
include(iree_cc_binary_benchmark)
include(iree_benchmark_suite)
include(iree_microbenchmark_suite)
include(iree_hal_cts_test_suite)
include(iree_static_linker_test)
include(iree_fetch_artifact)
include(iree_run_module_test)

# Default any sub-tree which doesn't provide its own package namespacing
# to derive it relative to this directory and prefixed with iree/.
set(IREE_PACKAGE_ROOT_DIR "${CMAKE_CURRENT_LIST_DIR}")
set(IREE_PACKAGE_ROOT_PREFIX "iree")

set(CMAKE_POSITION_INDEPENDENT_CODE TRUE)

#-------------------------------------------------------------------------------
# IREE compilation flags
#-------------------------------------------------------------------------------

iree_append_list_to_string(CMAKE_C_FLAGS_DEBUG ${IREE_C_FLAGS_DEBUG_LIST})
iree_append_list_to_string(CMAKE_CXX_FLAGS_DEBUG ${IREE_CXX_FLAGS_DEBUG_LIST})

set(CMAKE_CXX_FLAGS_FASTBUILD "-gmlt" CACHE STRING "Flags used by the C++ compiler during fast builds." FORCE)
set(CMAKE_C_FLAGS_FASTBUILD "-gmlt" CACHE STRING "Flags used by the C compiler during fast builds." FORCE)
set(CMAKE_EXE_LINKER_FLAGS_FASTBUILD "-Wl,-S" CACHE STRING "Flags used for linking binaries during fast builds." FORCE)
set(CMAKE_SHARED_LINKER_FLAGS_FASTBUILD "-Wl,-S" CACHE STRING "Flags used by the shared libraries linker binaries during fast builds." FORCE)
mark_as_advanced(
  CMAKE_CXX_FLAGS_FASTBUILD
  CMAKE_C_FLAGS_FASTBUILD
  CMAKE_EXE_LINKER_FLAGS_FASTBUILD
  CMAKE_SHARED_LINKER_FLAGS_FASTBUILD
)

# Override the system's default linker.
# See also: https://llvm.org/docs/CMake.html#llvm-use-linker.
set(IREE_USE_LINKER "" CACHE STRING "")
# Equivalent to setting -DIREE_USE_LINKER=lld.
# Note that unlike LLVM's LLVM_ENABLE_LLD, this does _not_ build lld. You will
# need to either install a recent version of lld or build it from source prior
# to setting this option. See also: https://lld.llvm.org/#using-lld.
# This option is disabled on Apple platforms, where lld is not supported.
cmake_dependent_option(IREE_ENABLE_LLD "Override the system's default linker to lld" OFF "NOT APPLE" OFF)

include(iree_setup_toolchain)

#-------------------------------------------------------------------------------
# Python
# If building features that require Python development, find them early in
# one invocation (some CMake versions are sensitive to resolving out of order).
# Otherwise, for features that just require the interpreter, find that alone.
#-------------------------------------------------------------------------------

if(IREE_BUILD_PYTHON_BINDINGS)
  # After CMake 3.18, we are able to limit the scope of the search to just
  # Development.Module. Searching for Development will fail in situations where
  # the Python libraries are not available. When possible, limit to just
  # Development.Module.
  # See https://pybind11.readthedocs.io/en/stable/compiling.html#findpython-mode
  #
  # Configuring the Development.Module is flaky in multi-project setups.
  # "Bootstrapping" by first looking for the optional Development component
  # seems to be robust generally.
  # See: https://reviews.llvm.org/D118148
  find_package(Python3 COMPONENTS Interpreter Development)
  find_package(Python3 COMPONENTS Interpreter Development.Module REQUIRED)
elseif(IREE_BUILD_COMPILER OR IREE_BUILD_TESTS)
  find_package(Python3 COMPONENTS Interpreter REQUIRED)
endif()

# Extended Python environment checks.
if(Python3_FOUND)
  iree_detect_pyyaml()
endif()

if(IREE_BUILD_TESTS AND NOT IREE_PYYAML_FOUND)
  message(WARNING "IREE's regression test suite requires PyYAML to run all tests. It is not installed, so some tests will be disabled.")
endif()

#-------------------------------------------------------------------------------
# Check if git submodules have been initialized.
# This will only run if python3 is available.
#-------------------------------------------------------------------------------

option(IREE_ERROR_ON_MISSING_SUBMODULES "Error if submodules have not been initialized." ON)

find_package(Python3 COMPONENTS Interpreter QUIET)
find_package(Git)
if(IREE_ERROR_ON_MISSING_SUBMODULES AND Python3_FOUND AND Git_FOUND)
  # Only check submodule status when the git commit changes.
  execute_process(
    COMMAND git rev-parse --short HEAD
    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
    RESULT_VARIABLE SHORT_HASH_RESULT
    OUTPUT_VARIABLE SHORT_HASH)
  string(REGEX REPLACE "\n$" "" SHORT_HASH "${SHORT_HASH}")
  if(SHORT_HASH_RESULT EQUAL "0" AND NOT "${IREE_GIT_SHORT_HASH}" STREQUAL "${SHORT_HASH}")
    if(NOT IREE_BUILD_COMPILER)
      set(CHECK_SUBMODULE_ARGS "--runtime_only")
    endif()
    execute_process(
      COMMAND ${Python3_EXECUTABLE} build_tools/scripts/git/check_submodule_init.py ${CHECK_SUBMODULE_ARGS}
      WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
      RESULT_VARIABLE SUBMODULE_INIT_RESULT
    )
    if(NOT SUBMODULE_INIT_RESULT EQUAL "0")
      message(FATAL_ERROR "check_submodule_init.py failed, see the logs above")
    else()
      set(IREE_GIT_SHORT_HASH "${SHORT_HASH}" CACHE STRING "" FORCE)
    endif()
  endif()
endif()

#-------------------------------------------------------------------------------
# IREE top-level targets
# We define these here because various things in the build tree adds
# dependencies to them.
#-------------------------------------------------------------------------------

if(IREE_BUILD_LEGACY_BENCHMARKS OR IREE_BUILD_E2E_TEST_ARTIFACTS)
  # Add top-level custom targets to drive generating benchmark suites.

  # iree-benchmark-import-models imports benchmark models from their source
  # formats, such as .tflite flatbuffers, to IREE-compatible .mlir files.
  add_custom_target(iree-benchmark-import-models)

  # iree-benchmark-suites fully prepares benchmark models for benchmarking:
  #   * importing from source formats to IREE-compatible .mlir files
  #   * compiling from .mlir files to benchmark-ready .vmfb files
  #   * generating flagfiles for executing the benchmark .vmfb files
  add_custom_target(iree-benchmark-suites)
endif()

# TODO(#11263): This conditional block should be merged with the block above
# once we remove IREE_BUILD_LEGACY_BENCHMARKS.
if(IREE_BUILD_E2E_TEST_ARTIFACTS)
  # iree-e2e-compile-stats-suites compiles the benchmark models with specific
  # flags to collect the compilation statistics.
  add_custom_target(iree-e2e-compile-stats-suites)

  # iree-e2e-test-artifacts builds all e2e test artifacts, including benchmarks
  # and model tests.
  add_custom_target(iree-e2e-test-artifacts)
  add_dependencies(iree-e2e-test-artifacts
    iree-benchmark-import-models
    iree-benchmark-suites
    iree-e2e-compile-stats-suites
  )
endif()

if(IREE_BUILD_MICROBENCHMARKS)
  # Add top-level custom targets to drive generating microbenchmark suites.
  add_custom_target(iree-microbenchmark-suites)
endif()

if(IREE_BUILD_DOCS)
  # Add a top-level custom target to drive generating all documentation.
  # Register it to the default target given that IREE_BUILD_DOCS is explicitly
  # requested.
  add_custom_target(iree-doc ALL)
endif()

# Samples may require additional files to be built/configured and will add
# dependencies to this target.
# Note: These will be automatically built with test dependencies
# (`iree-test-deps`).
add_custom_target(iree-sample-deps
  COMMENT
    "Building IREE sample data targets"
)

# Testing rules that require generation will add dependencies to this target.
# This allows them to be EXCLUDE_FROM_ALL but still invokable.
add_custom_target(iree-test-deps
  COMMENT
    "Building IREE test deps"
  DEPENDS
    iree-sample-deps
)

# Testing rules that generate test scripts for iree-run-module-test will add
# dependencies to this target. It is a subset of `iree-test-deps`.
add_custom_target(iree-run-module-test-deps
  COMMENT
    "Building IREE run module test targets"
)

# Convenience target for running IREE tests.
add_custom_target(iree-run-tests
  COMMENT
    "Run IREE unit tests"
  WORKING_DIRECTORY
    "${CMAKE_CURRENT_BINARY_DIR}"
  USES_TERMINAL
  COMMAND
    "${CMAKE_COMMAND}" -E echo
    "The 'iree-run-tests' target is a helper for running ctest. For advanced"
    "options, build dependencies and invoke ctest independently as in:"
  COMMAND
    "${CMAKE_COMMAND}" -E echo
    "  \\(cd ${CMAKE_CURRENT_BINARY_DIR} \\&\\& cmake --build . --target iree-test-deps \\&\\& ctest --output-on-failure\\)"
  COMMAND
    "${CMAKE_COMMAND}" -E echo
    "Run tests in parallel by setting a variable like CTEST_PARALLEL_LEVEL=25."
  COMMAND
    "${CMAKE_CTEST_COMMAND}"
    --output-on-failure
)
add_dependencies(iree-run-tests iree-test-deps)

#-------------------------------------------------------------------------------
# CUDA configuration for both the compiler and runtime.
# We do this at the top level so that we can fail fast and make global
# decisions that effect both compiler and runtime. It also helps with error
# messaging to do this all in one place, since we can provide very targeted
# advice.
#-------------------------------------------------------------------------------

set(IREE_CUDA_LIBDEVICE_PATH "" CACHE FILEPATH "Absolute path to an appropriate libdevice.*.bc (needed to build the IREE cuda compiler target)")

# If any CUDA features are being built, try to locate a CUDA SDK. We will fall
# back to this as needed for specific features.
if(IREE_TARGET_BACKEND_CUDA OR IREE_HAL_DRIVER_CUDA)
  add_subdirectory(build_tools/third_party/cuda EXCLUDE_FROM_ALL)
endif()

#-------------------------------------------------------------------------------
# MLIR/LLVM Dependency
#-------------------------------------------------------------------------------

if(NOT IREE_BUILD_COMPILER)
  message(STATUS "Not adding LLVM/MLIR because the configuration does not require it")
else()
  # Force enable BUILD_SHARED_LIBS for the compiler if instructed.
  set(_IREE_ORIG_BUILD_SHARED_LIBS ${BUILD_SHARED_LIBS})
  if(IREE_COMPILER_BUILD_SHARED_LIBS)
    set(BUILD_SHARED_LIBS ON CACHE BOOL "" FORCE)
  endif()

  # Get the main LLVM deps.
  if(IREE_BUILD_BUNDLED_LLVM)
    iree_llvm_configure_bundled()
  else()
    iree_llvm_configure_installed()
  endif()

  # Also add a library that can be depended on to get LLVM includes setup
  # properly. bazel_to_cmake targets this for some header only pseudo deps.
  add_library(IREELLVMIncludeSetup INTERFACE)
  target_include_directories(IREELLVMIncludeSetup INTERFACE
    ${LLVM_INCLUDE_DIRS}
    ${MLIR_INCLUDE_DIRS}
    ${LLD_INCLUDE_DIRS}
  )

  # Splice the includes setup into base LLVM libraries so that using them
  # gets everything nice and tidy. It would be super if some day, LLVM
  # libraries set their right usage requirements for includes. In the meantime
  # we add usage requirements to libraries at the root of all things LLVM.
  iree_llvm_add_usage_requirements(LLVMSupport IREELLVMIncludeSetup)
  iree_llvm_add_usage_requirements(MLIRSupport IREELLVMIncludeSetup)

  # Add default external projects.
  iree_llvm_add_external_project(mlir-iree-dialects ${CMAKE_CURRENT_SOURCE_DIR}/llvm-external-projects/iree-dialects)
  iree_llvm_add_external_project(mlir-hlo ${CMAKE_CURRENT_SOURCE_DIR}/third_party/mlir-hlo)
  if(IREE_INPUT_TORCH)
    iree_llvm_add_external_project(torch-mlir-dialects ${CMAKE_CURRENT_SOURCE_DIR}/third_party/torch-mlir-dialects)
  endif()

  # Ensure that LLVM-based dependencies needed for testing are included.
  add_dependencies(iree-test-deps FileCheck)
  if(IREE_LLD_TARGET)
    add_dependencies(iree-test-deps ${IREE_LLD_TARGET})
  endif()
  if(IREE_CLANG_TARGET)
    add_dependencies(iree-test-deps ${IREE_CLANG_TARGET})
  endif()

  set(BUILD_SHARED_LIBS ${_IREE_ORIG_BUILD_SHARED_LIBS} CACHE BOOL "" FORCE)
endif()

#-------------------------------------------------------------------------------
# Other dependencies
#-------------------------------------------------------------------------------

include(external_cc_library)
include(flatbuffer_c_library)

add_subdirectory(build_tools/third_party/libyaml EXCLUDE_FROM_ALL)
add_subdirectory(build_tools/third_party/llvm-project EXCLUDE_FROM_ALL)
add_subdirectory(build_tools/third_party/tracy_client EXCLUDE_FROM_ALL)
add_subdirectory(build_tools/third_party/vulkan_memory_allocator EXCLUDE_FROM_ALL)

iree_set_googletest_cmake_options()
add_subdirectory(third_party/googletest EXCLUDE_FROM_ALL)

if(IREE_ENABLE_THREADING)
  iree_set_benchmark_cmake_options()
  add_subdirectory(third_party/benchmark EXCLUDE_FROM_ALL)
  if(IREE_ENABLE_CPUINFO)
    iree_set_cpuinfo_cmake_options()
    add_subdirectory(third_party/cpuinfo EXCLUDE_FROM_ALL)
  endif()
endif()

# This defines the iree-flatcc-cli target, so we don't use EXCLUDE_FROM_ALL.
add_subdirectory(build_tools/third_party/flatcc)

if(IREE_HAL_DRIVER_CUDA)
  add_subdirectory(build_tools/third_party/nccl EXCLUDE_FROM_ALL)
endif()

if(IREE_HAL_DRIVER_VULKAN)
  add_subdirectory(third_party/vulkan_headers EXCLUDE_FROM_ALL)
endif()

if(IREE_BUILD_COMPILER)
  add_subdirectory(build_tools/third_party/mlir-hlo EXCLUDE_FROM_ALL)
endif()

if(IREE_BUILD_TESTS)
  include(iree_configure_testing)
endif()

if(IREE_BUILD_PYTHON_BINDINGS)
  if(NOT TARGET pybind11::module)
    message(STATUS "Using bundled pybind11")
    add_subdirectory(third_party/pybind11 EXCLUDE_FROM_ALL)
  else()
    message(STATUS "Not including bundled pybind11 (already configured)")
  endif()
endif()

if(IREE_TARGET_BACKEND_METAL_SPIRV)
  iree_set_spirv_cross_cmake_options()
  # SPIRV-Cross is needed to cross compile SPIR-V into MSL source code.
  add_subdirectory(third_party/spirv_cross EXCLUDE_FROM_ALL)
endif()

if(IREE_TARGET_BACKEND_WEBGPU)
  # Tint is needed to compile SPIR-V into WGSL source code.
  # Tint also requires SPIRV-Tools, which requires SPIRV-Headers.
  iree_set_spirv_headers_cmake_options()
  add_subdirectory(third_party/spirv_headers EXCLUDE_FROM_ALL)
  add_subdirectory(build_tools/third_party/spirv-tools EXCLUDE_FROM_ALL)
  add_subdirectory(build_tools/third_party/tint EXCLUDE_FROM_ALL)
endif()

#-------------------------------------------------------------------------------
# IREE top-level libraries
#-------------------------------------------------------------------------------

if(IREE_ENABLE_CLANG_TIDY)
  set(CMAKE_CXX_CLANG_TIDY clang-tidy -warnings-as-errors=*)
endif()

add_subdirectory(build_tools/embed_data/)

if(IREE_BUILD_LEGACY_BENCHMARKS OR IREE_BUILD_E2E_TEST_ARTIFACTS)
  find_program(IREE_IMPORT_TFLITE_PATH iree-import-tflite)
  if(IREE_IMPORT_TFLITE_PATH)
    message(STATUS "Found ${IREE_IMPORT_TFLITE_PATH} to generate benchmark artifacts")
  else()
    message(STATUS "iree-import-tflite not found. Some benchmarks may not configure")
  endif()
  find_program(IREE_IMPORT_TF_PATH iree-import-tf)
  if(IREE_IMPORT_TF_PATH)
    message(STATUS "Found ${IREE_IMPORT_TF_PATH} to generate benchmark artifacts")
  else()
    message(STATUS "iree-import-tf not found. Some benchmarks may not configure")
  endif()
endif()

# Note: Test deps are not built as part of all (use the iree-test-deps target).
add_subdirectory(tests EXCLUDE_FROM_ALL)

if(IREE_BUILD_LEGACY_BENCHMARKS)
  add_subdirectory(benchmarks)
endif()

# tools/ can depend on compiler/ and runtime/.
# Note: tools sub directory is added before compiler/ so that phony targets for
# files with the same names from different rules are disambiguated towards
# those in tools/.
add_subdirectory(tools)
add_subdirectory(compiler)
add_subdirectory(runtime)

if(IREE_ENABLE_CLANG_TIDY)
  set(CMAKE_CXX_CLANG_TIDY "")
endif()

if(IREE_BUILD_TRACY)
  if(NOT CMAKE_SYSTEM_NAME MATCHES "Linux")
    message(WARNING "Building Tracy (IREE_BUILD_TRACY) on non-Linux is unsupported and may fail below.")
  endif()
  add_subdirectory(build_tools/third_party/tracy ${CMAKE_CURRENT_BINARY_DIR}/tracy)
  if(NOT TARGET IREETracyCaptureServer)
    message(SEND_ERROR "Could not build Tracy. Either unset IREE_BUILD_TRACY or look for missing dependencies above and install them.")
  endif()
endif()

# Order constraint: The python bindings install tools targets from tools/
# and tracy, and must come after it.
if(IREE_BUILD_PYTHON_BINDINGS)
  # Write out a .env file to make IDEs and developers happy.
  # Yes, we are writing this to the source dir. It is only for IDEs and if
  # it gets clobbered, it is fine (it is also ignored in .gitignore).
  set(_PYTHONPATH_ENV "PYTHONPATH=$<SHELL_PATH:${CMAKE_CURRENT_BINARY_DIR}/compiler/bindings/python;${CMAKE_CURRENT_BINARY_DIR}/runtime/bindings/python>\n")
  file(GENERATE OUTPUT "${CMAKE_CURRENT_SOURCE_DIR}/.env" CONTENT "${_PYTHONPATH_ENV}")
  file(GENERATE OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/.env" CONTENT "${_PYTHONPATH_ENV}")
  # Similarly, write out .env.bat for Windows.
  set(_PYTHONPATH_ENV_BAT "set PYTHONPATH=$<SHELL_PATH:${CMAKE_CURRENT_BINARY_DIR}/compiler/bindings/python;${CMAKE_CURRENT_BINARY_DIR}/runtime/bindings/python>\n")
  file(GENERATE OUTPUT "${CMAKE_CURRENT_BINARY_DIR}/.env.bat" CONTENT "${_PYTHONPATH_ENV_BAT}")
endif()

if(IREE_BUILD_BINDINGS_TFLITE)
  add_subdirectory(runtime/bindings/tflite)
endif()

if(IREE_BUILD_EXPERIMENTAL_WEB_SAMPLES)
  add_subdirectory(experimental/web)
endif()

if(IREE_BUILD_EXPERIMENTAL_CPU_UKERNEL_PLUGINS)
  add_subdirectory(experimental/cpu_ukernel)
endif()

set(IREE_PUBLIC_INCLUDE_DIRS "${IREE_COMMON_INCLUDE_DIRS}"
    CACHE INTERNAL "IREE: Include Directories" FORCE)

#-------------------------------------------------------------------------------
# IREE benchmark tools
#-------------------------------------------------------------------------------

add_subdirectory(build_tools/benchmarks)

#-------------------------------------------------------------------------------
# IREE build tools python modules
#-------------------------------------------------------------------------------

add_subdirectory(build_tools/python)

#-------------------------------------------------------------------------------
# Optional features
#-------------------------------------------------------------------------------

# samples/ can depend on anything, so we include it last
if(IREE_BUILD_SAMPLES)
  add_subdirectory(samples)
endif()

if(IREE_BUILD_TESTS)
  iree_create_ctest_customization()
endif()