# Copyright 2019 The IREE Authors
#
# Licensed under the Apache License v2.0 with LLVM Exceptions.
# See https://llvm.org/LICENSE.txt for license information.
# SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception

#-------------------------------------------------------------------------------
# C/C++ options as used within IREE
#-------------------------------------------------------------------------------
#
#         ██     ██  █████  ██████  ███    ██ ██ ███    ██  ██████
#         ██     ██ ██   ██ ██   ██ ████   ██ ██ ████   ██ ██
#         ██  █  ██ ███████ ██████  ██ ██  ██ ██ ██ ██  ██ ██   ███
#         ██ ███ ██ ██   ██ ██   ██ ██  ██ ██ ██ ██  ██ ██ ██    ██
#          ███ ███  ██   ██ ██   ██ ██   ████ ██ ██   ████  ██████
#
# Everything here is added to *every* iree_cc_library/iree_cc_binary/etc.
# That includes both runtime and compiler components, and these may propagate
# out to user code interacting with either (such as custom modules).
#
# Be extremely judicious in the use of these flags.
#
# - Need to disable a warning?
#   Usually these are encountered in compiler-specific code and can be disabled
#   in a compiler-specific way. Only add global warning disables when it's clear
#   that we never want them or that they'll show up in a lot of places.
#
#   See: https://stackoverflow.com/questions/3378560/how-to-disable-gcc-warnings-for-a-few-lines-of-code
#
# - Need to add a linker dependency?
#   First figure out if you *really* need it. If it's only required on specific
#   platforms and in very specific files clang or msvc are used prefer
#   autolinking. GCC is stubborn and doesn't have autolinking so additional
#   flags may be required there.
#
#   See: https://en.wikipedia.org/wiki/Auto-linking
#
# - Need to tweak a compilation mode setting (debug/asserts/etc)?
#   Don't do that here, and in general *don't do that at all* unless it's behind
#   a very specific IREE-prefixed cmake flag (like IREE_SIZE_OPTIMIZED).
#   There's no one-size solution when we are dealing with cross-project and
#   cross-compiled binaries - there's no safe way to set global options that
#   won't cause someone to break, and you probably don't really need to do
#   change that setting anyway. Follow the rule of least surprise: if the user
#   has CMake's Debug configuration active then don't force things into release
#   mode, etc.
#
# - Need to add an include directory?
#   Don't do that here. Always prefer to fully-specify the path from the IREE
#   workspace root when it's known that the compilation will be occuring using
#   the files within the IREE checkout; for example, instead of adding a global
#   include path to third_party/foo/ and #include <foo.h>'ing, just
#   #include "third_party/foo/foo.h". This reduces build configuration, makes it
#   easier for readers to find the files, etc.
#
# - Still think you need to add an include directory? (system includes, etc)
#   Don't do that here, either. It's highly doubtful that every single target in
#   all of IREE (both compiler and runtime) on all platforms (both host and
#   cross-compilation targets) needs your special include directory. Add it on
#   the COPTS of the target you are using it in and, ideally, private to that
#   target (used in .c/cc files, not in a .h that leaks the include path
#   requirements to all consumers of the API).

set(IREE_CXX_STANDARD ${CMAKE_CXX_STANDARD})

# TODO(benvanik): fix these names (or remove entirely).
set(IREE_ROOT_DIR ${CMAKE_CURRENT_SOURCE_DIR})
set(IREE_SOURCE_DIR ${CMAKE_CURRENT_SOURCE_DIR})
set(IREE_BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR})

# By default we apply visibility control explicitly. However, this is available
# as an option for users who need to control this explicitly (i.e. if
# re-exporting, etc). Defaulting this to on with explicit API control macros
# makes Linux and Windows behave similarly with respect to shared libraries
# and DLLs.
if(IREE_VISIBILITY_HIDDEN)
iree_select_compiler_opts(IREE_DEFAULT_COPTS
  CLANG_OR_GCC
    "-fvisibility=hidden"
)
endif()

# Key compilation options
iree_select_compiler_opts(IREE_DEFAULT_COPTS
  CLANG_OR_GCC
    # NOTE: The RTTI setting must match what LLVM was compiled with (defaults
    # to RTTI disabled).
    "$<$<COMPILE_LANGUAGE:CXX>:-fno-rtti>"
    "$<$<COMPILE_LANGUAGE:CXX>:-fno-exceptions>"

  MSVC_OR_CLANG_CL
    # Exclude a bunch of rarely-used APIs, such as crypto/DDE/shell.
    # https://docs.microsoft.com/en-us/windows/win32/winprog/using-the-windows-headers
    # NOTE: this is not really required anymore for build performance but does
    # work around some issues that crop up with header version compatibility
    # (abseil has issues with winsock versions).
    "/DWIN32_LEAN_AND_MEAN"

    # Don't allow windows.h to define MIN and MAX and conflict with the STL.
    # There's no legit use for these macros as any code we are writing ourselves
    # that we want a MIN/MAX in should be using an IREE-prefixed version
    # instead: iree_min iree_max
    # https://stackoverflow.com/a/4914108
    "/DNOMINMAX"

    # Adds M_PI and other constants to <math.h>/<cmath> (to match non-windows).
    # https://docs.microsoft.com/en-us/cpp/c-runtime-library/math-constants
    "/D_USE_MATH_DEFINES"

    # Disable the "deprecation" warnings about CRT functions like strcpy.
    # Though the secure versions *are* better, they aren't portable and as such
    # just make cross-platform code annoying. One solution is to reimplement
    # them in a portable fashion and use those - and that's what we try to do
    # in certain places where we can get away with it. Other uses, like getenv,
    # are fine as these are not intended for use in core runtime code that needs
    # to be secure (friends don't let friends ship entire compiler stacks
    # embedded inside security sensitive applications anyway :).
    # https://docs.microsoft.com/en-us/cpp/c-runtime-library/security-features-in-the-crt
    "/D_CRT_SECURE_NO_WARNINGS"

    # With the above said about the "deprecated" functions; this useful flag
    # will at least try to use them when possible without any change to user
    # code. Note however because the new versions use templates they won't be
    # activated in C code; that's fine.
    # https://docs.microsoft.com/en-us/cpp/c-runtime-library/secure-template-overloads
    "/D_CRT_SECURE_CPP_OVERLOAD_STANDARD_NAMES"

    # MLIR defines std::complex<APFloat>, which is invalid per the C++ spec
    # stating that std::complex must only be used with builtin compiler types.
    # Until MLIR cleans this up we silence it so that we don't end up with
    # a warning per file that includes mlir/IR/BuiltinAttributes.h.
    # Tracking issue: https://github.com/llvm/llvm-project/issues/65255
    "/D_SILENCE_NONFLOATING_COMPLEX_DEPRECATION_WARNING"

    # Configure RTTI generation.
    # - /GR - Enable generation of RTTI (default)
    # - /GR- - Disables generation of RTTI
    # https://docs.microsoft.com/en-us/cpp/build/reference/gr-enable-run-time-type-information?view=msvc-160
    "/GR-"

    # Default max section count is 64k, which is woefully inadequate for some of
    # the insanely bloated tablegen outputs LLVM/MLIR produces. This cranks it
    # up to 2^32. It's not great that we have to generate/link files like that
    # but it's better to not get spurious failures during LTCG.
    # https://docs.microsoft.com/en-us/cpp/build/reference/bigobj-increase-number-of-sections-in-dot-obj-file
    "/bigobj"

    # Enable C11 standards conforming mode.
    "$<$<COMPILE_LANGUAGE:C>:/std:c11>"

  MSVC
    # Use the modern C preprocessor to more closely match standards/clang/gcc behavior.
    "/Zc:preprocessor"
)

# Compiler diagnostics.
# Please keep these in sync with build_tools/bazel/iree.bazelrc
iree_select_compiler_opts(IREE_DEFAULT_COPTS
  # Clang diagnostics. These largely match the set of warnings used within
  # Google. They have not been audited super carefully by the IREE team but are
  # generally thought to be a good set and consistency with those used
  # internally is very useful when importing. If you feel that some of these
  # should be different (especially more strict), please raise an issue!
  CLANG
    "$<$<BOOL:${IREE_ENABLE_WERROR_FLAG}>:-Werror>"
    "-Wall"

    "-Wno-error=deprecated-declarations"  # Want to see them but defaults to error.

    # Disable warnings we don't care about or that generally have a low
    # signal/noise ratio.
    "-Wno-ambiguous-member-template"
    "-Wno-char-subscripts"
    "-Wno-extern-c-compat" # Matches upstream. Cannot impact due to extern C inclusion method.
    "-Wno-gnu-alignof-expression"
    "-Wno-gnu-variable-sized-type-not-at-end"
    "-Wno-ignored-optimization-argument"
    "-Wno-invalid-offsetof" # Technically UB but needed for intrusive ptrs
    "-Wno-invalid-source-encoding"
    "-Wno-mismatched-tags"
    "-Wno-pointer-sign"
    "-Wno-reserved-user-defined-literal"
    "-Wno-return-type-c-linkage"
    "-Wno-self-assign-overloaded"
    "-Wno-sign-compare"
    "-Wno-signed-unsigned-wchar"
    "-Wno-strict-overflow"
    "-Wno-trigraphs"
    "-Wno-unknown-pragmas"
    "-Wno-unknown-warning-option"
    "-Wno-unused-command-line-argument"
    "-Wno-unused-const-variable"
    "-Wno-unused-function"
    "-Wno-unused-local-typedef"
    "-Wno-unused-private-field"
    "-Wno-user-defined-warnings"
    "-Wno-missing-braces"  # Inconsistently triggers between C++/C headers.

    # Explicitly enable some additional warnings.
    # Some of these aren't on by default, or under -Wall, or are subsets of
    # warnings turned off above.
    #
    # TODO(#16946): reenable -Wc++20-extensions.
    # "-Wc++20-extensions"  # Enable until we use C++20 across all compilers
    "-Wctad-maybe-unsupported"
    "-Wfloat-overflow-conversion"
    "-Wfloat-zero-conversion"
    "-Wfor-loop-analysis"
    "-Wformat-security"
    "-Wgnu-redeclared-enum"
    "-Wimplicit-fallthrough"
    "-Winfinite-recursion"
    "-Wliteral-conversion"
    "-Wlogical-op-parentheses"
    "-Wnon-virtual-dtor"
    "-Woverloaded-virtual"
    "-Wpointer-arith"
    "-Wself-assign"
    "-Wstring-conversion"
    "-Wtautological-overlap-compare"
    "-Wthread-safety"
    "-Wthread-safety-beta"
    "-Wunused-comparison"
    "-Wvla"

  CLANG_GTE_12
    # Clang is lax by default on SIMD vector typing. GCC is strict by default.
    # Some Clang's circa version 10 had incorrect return types for some
    # intrinsics (#14168).
    "-fno-lax-vector-conversions"

  GCC
    "-Wall"
    "$<$<BOOL:${IREE_ENABLE_WERROR_FLAG}>:-Werror>"
    "-Wno-error=deprecated-declarations"  # Want to see them but defaults to error.

    "-Wno-address"  # https://github.com/iree-org/iree/issues/16016
    "-Wno-address-of-packed-member"
    "-Wno-comment"
    "-Wno-format-zero-length"
    "-Wno-uninitialized"
    # gcc complains more than clang, see #15631 and #15638
    $<$<COMPILE_LANGUAGE:CXX>:-Wno-overloaded-virtual>
    # Technically UB but needed for intrusive ptrs
    $<$<COMPILE_LANGUAGE:CXX>:-Wno-invalid-offsetof>
    $<$<COMPILE_LANGUAGE:C>:-Wno-pointer-sign>
    "-Wno-sign-compare"
    "-Wno-unused-function"
    "-Wno-unknown-pragmas"
    "-Wno-unused-but-set-variable"
    "-Wno-misleading-indentation"

  GCC_GTE_13
    # False positives? Not useful? https://stackoverflow.com/a/78760067
    $<$<COMPILE_LANGUAGE:CXX>:-Wno-dangling-reference>

  MSVC_OR_CLANG_CL
    # Default warning level (severe + significant + production quality).
    # This does not include level 4, "informational", warnings or those that
    # are off by default.
    # https://docs.microsoft.com/en-us/cpp/build/reference/compiler-option-warning-level
    # Note that we set CMake policy CMP0092 (if found), making this explicit:
    # https://cmake.org/cmake/help/v3.15/policy/CMP0092.html
    "/W3"

    # "nonstandard extension used : zero-sized array in struct/union"
    # This happens with unsized or zero-length arrays at the end of structs,
    # which is completely valid in C where we do it and get this warning. Shut
    # it up and rely on the better warnings from clang to catch if we try to
    # use it where it really matters (on a class that has copy/move ctors, etc).
    # https://docs.microsoft.com/en-us/cpp/error-messages/compiler-warnings/compiler-warning-levels-2-and-4-c4200
    "/wd4200"

    # "signed/unsigned mismatch in comparison"
    # This is along the lines of a generic implicit conversion warning but tends
    # to crop up in code that implicitly treats unsigned size_t values as if
    # they were signed values instead of properly using ssize_t. In certain
    # cases where the comparison being performed may be guarding access to
    # memory this can cause unexpected behavior ("-1ull < 512ull, great let's
    # dereference buffer[-1ull]!").
    # https://docs.microsoft.com/en-us/cpp/error-messages/compiler-warnings/compiler-warning-level-3-c4018
    #
    # TODO(#3844): remove this (or make it per-file to iree/compiler, as LLVM
    # tends to not care about these kind of things and it crops up there a lot).
    "/wd4018"

    # Also common in LLVM is mismatching signed/unsigned math. That's even more
    # dangerous than C4018: almost always these crop up in doing something with
    # a size_t and a non-size_t value (usually int or something like it) and do
    # you want out-of-bounds access exploits? Because that's how you get
    # out-of-bounds access exploits. Before fuzzers took over finding code and
    # trying to compile it with this warning forced to be an error was a way to
    # narrow down the places to look for attack vectors. I lived through the
    # Microsoft SAL/safe-int code red, and once you get used to using the safe
    # buffer offset/size manipulation functions it eliminates all kinds of
    # annoying bugs - as well as potential security issues.
    #
    # TODO(#3844): work to remove this class of errors from our code. It's
    # almost entirely in LLVM related stuff so per-file iree/compiler/... would
    # be fine.
    "/wd4146"  # operator applied to unsigned type, result still unsigned
    "/wd4244"  # possible loss of data
    "/wd4267"  # initializing: possible loss of data

    # Misc tweaks to better match reasonable clang/gcc behavior:
    "/wd4005"  # allow: macro redefinition
    "/wd4065"  # allow: switch statement contains 'default' but no 'case' labels
    "/wd4141"  # allow: inline used more than once
    "/wd4624"  # allow: destructor was implicitly defined as deleted
    "/wd4576"  # allow: a parenthesized type followed by an initializer list is a non-standard explicit type conversion syntax

    # TODO(benvanik): confirm these are all still required and document:
    "/wd4146"  # operator applied to unsigned type, result still unsigned
    "/wd4244"  # possible loss of data
    "/wd4267"  # initializing: possible loss of data
    "/wd5105"  # allow: macro expansion producing 'defined' has undefined behavior
)

# Set some things back to warnings that are really annoying as build errors
# during active development (but we still want as errors on CI).
if(IREE_DEV_MODE)
  iree_select_compiler_opts(IREE_DEFAULT_COPTS
    CLANG_OR_GCC
      "-Wno-error=unused-parameter"
      "-Wno-error=unused-variable"
  )
endif()

#-------------------------------------------------------------------------------
# Enable frame pointers in IREE_DEV_MODE and in RelWithDebInfo build type ---
# these are conditions under which the instrumentation/debugging/profiling
# benefits of frame pointers outweigh the cost.
#
# `perf record -g` defaults to relying on frame pointers. There is a non-default
# option `perf record --call-graph=dwarf`, to rely on debug info instead. It
# produces inferior results and has a discoverability issue anyway.
#-------------------------------------------------------------------------------

string(TOUPPER "${CMAKE_BUILD_TYPE}" _UPPERCASE_CMAKE_BUILD_TYPE)
if (IREE_DEV_MODE OR (_UPPERCASE_CMAKE_BUILD_TYPE STREQUAL "RELWITHDEBINFO"))
  iree_select_compiler_opts(IREE_DEFAULT_COPTS
    CLANG_OR_GCC
      "-fno-omit-frame-pointer"
  )
endif()

# Debug information and __FILE__ macros get expanded with full paths by default.
# This results in binaries that differ based on what directories they are built
# from and that's annoying.
#
# For now in all configurations we make __FILE__ macros relative. We could also
# make debug information relative using -fdebug-prefix-map but deterministic
# builds are most interesting in release modes that have debug info stripped.
get_filename_component(_IREE_ROOT_NAME ${IREE_ROOT_DIR} NAME)
iree_select_compiler_opts(IREE_DEFAULT_COPTS
  # TODO(benvanik): make this CLANG_OR_GCC once clang-9 is no longer supported.
  CLANG_GTE_10
    "-fmacro-prefix-map=${IREE_ROOT_DIR}=${_IREE_ROOT_NAME}"
  GCC
    "-fmacro-prefix-map=${IREE_ROOT_DIR}=${_IREE_ROOT_NAME}"
)

# On MSVC, CMake sets /GR by default (enabling RTTI), but we set /GR-
# (disabling it) above. To avoid Command line warning D9025 which warns about
# overriding the flag value, we remove /GR from global CMake flags.
#
# Note: this may have ripple effects on downstream projects using IREE. If this
# is a problem for your project, please reach out to us and we'll figure out a
# compatible solution.
#
# See also:
#   https://github.com/iree-org/iree/issues/4665.
#   https://discourse.cmake.org/t/how-to-fix-build-warning-d9025-overriding-gr-with-gr/878
#   https://gitlab.kitware.com/cmake/cmake/-/issues/20610
if(CMAKE_CXX_FLAGS AND "${CMAKE_CXX_COMPILER_ID}" STREQUAL "MSVC")
  string(REPLACE "/GR" "" CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS}")
endif()

# Find and add threads as dependency.
if(NOT ANDROID AND IREE_ENABLE_THREADING)
  set(CMAKE_THREAD_PREFER_PTHREAD TRUE)
  set(THREADS_PREFER_PTHREAD_FLAG TRUE)
  find_package(Threads)
  set(IREE_THREADS_DEPS Threads::Threads)
else()
  # Android provides its own pthreads support with no linking required.
endif()


# Emscripten needs -pthread specified in link _and_ compile options when using
# atomics, shared memory, or pthreads. If we bring our own threading impl and
# try to omit this, we get this error:
#   `--shared-memory is disallowed because it was not compiled with 'atomics'
#    or 'bulk-memory' features`
# TODO(scotttodd): Figure out how to use atomics and/or shared memory without
#                  Specifying this flag
# https://emscripten.org/docs/porting/pthreads.html#compiling-with-pthreads-enabled
if(EMSCRIPTEN AND IREE_ENABLE_THREADING)
  iree_select_compiler_opts(IREE_DEFAULT_COPTS
    ALL
      "-pthread"
  )
endif()

if(ANDROID)
  # logging.h on Android needs llog to link in Android logging.
  iree_select_compiler_opts(_IREE_LOGGING_LINKOPTS
    CLANG_OR_GCC
      "-llog"
  )
endif()

iree_select_compiler_opts(IREE_DEFAULT_LINKOPTS
  CLANG_OR_GCC
    # Required by all modern software, effectively:
    "-lm"
    ${_IREE_LOGGING_LINKOPTS}
  MSVC
    "-natvis:${IREE_ROOT_DIR}/runtime/iree.natvis"

    # Added to fix "LNK1318" error when "IREECompiler.pdb" exceeds 4GiB per:
    # https://github.com/iree-org/iree/issues/20763#issuecomment-2902057042
    "-pdbpagesize:32768"
)

if(EMSCRIPTEN AND IREE_EXTERNAL_WEBGPU_HAL_DRIVER_FOUND)
  iree_select_compiler_opts(IREE_DEFAULT_LINKOPTS
    ALL
      # TODO(scotttodd): Only add when using WebGPU in a library/binary?
      "-sUSE_WEBGPU"
      # Hack: Used to create sync versions of requestAdapter and requestDevice
      # TODO(scotttodd): Only set for test binaries, avoid sync code in apps
      #   this doesn't _break_ apps that don't use the sync functions, but it
      #   does bloat their binary size (and each Emscripten flag comes with
      #   some risk of breaking compatibility with other features)
      "-sASYNCIFY"
  )
endif()

#-------------------------------------------------------------------------------
# Flag sets used different optimization profiles.
#-------------------------------------------------------------------------------

iree_select_compiler_opts(IREE_LTO_COPTS
  CLANG
    "-flto=${IREE_LTO_MODE}"
  GCC
    "-flto"
    "-fuse-linker-plugin"
  MSVC_OR_CLANG_CL
    "/GL"
)

iree_select_compiler_opts(IREE_LTO_LINKOPTS
  CLANG
    "-flto=${IREE_LTO_MODE}"
  GCC
    "-flto"
  MSVC_OR_CLANG_CL
    "-LTCG"
)

iree_select_compiler_opts(IREE_SIZE_OPTIMIZED_DEFAULT_COPTS
  MSVC_OR_CLANG_CL
    "/GS-"
    "/Gw"
    "/Gy"
    "/DNDEBUG"
    "/Os"
    "/Oy"
    "/Zi"
    "/c"
)
iree_select_compiler_opts(IREE_SIZE_OPTIMIZED_DEFAULT_LINKOPTS
  MSVC_OR_CLANG_CL
    "-DEBUG:FULL"
    "-opt:ref,icf"
)

# Function which enables various optimization options for a sub-tree by
# modifying the IREE_DEFAULT_COPTS and IREE_DEFAULT_LINKOPTS that targets
# created after this point use.
#
# Available profiles:
#   "lto": Applies options to enable link time code generation.
#   "size": Applies a variety of options to minimize the size of the runtime,
#     generally at the expense of features but not performance. This implies
#     LTO.
#
# Parameters:
# PROFILE_NAME: Name of a supported profile or falsey for none.
# SIZE_INTERFACE_COPTS: Additional IREE_INTERFACE_COPTS to add for the
#   "size" profile.
function(iree_enable_optimization_options)
  cmake_parse_arguments(
    _RULE
    ""
    "PROFILE_NAME"
    "SIZE_INTERFACE_COPTS"
    ${ARGN}
  )

  if(NOT _RULE_PROFILE_NAME)
    # Do nothing.
    return()
  endif()

  set(_ADDL_COPTS)
  set(_ADDL_INTERFACE_COPTS)
  set(_ADDL_LINKOPTS)

  if(_RULE_PROFILE_NAME STREQUAL "lto")
    set(_ADDL_COPTS ${IREE_LTO_COPTS})
    set(_ADDL_LINKOPTS ${IREE_LTO_LINKOPTS})
  elseif(_RULE_PROFILE_NAME STREQUAL "size")
    # Size optimized assumes LTO.
    # Size optimized often also elides logging and various status reporting,
    # which can result in unused-but-set-variable style warnings. Disable those.
    iree_select_compiler_opts(_ADDL_COPTS
      ALL
        ${IREE_LTO_COPTS}
        ${IREE_SIZE_OPTIMIZED_DEFAULT_COPTS}
      CLANG_OR_GCC
        -Wno-unused-but-set-variable
    )
    set(_ADDL_INTERFACE_COPTS "${_RULE_SIZE_INTERFACE_COPTS}")
    set(_ADDL_LINKOPTS
      ${IREE_LTO_LINKOPTS}
      ${IREE_SIZE_OPTIMIZED_DEFAULT_LINKOPTS}
    )
  else()
    message(FATAL_ERROR "Unrecognized size optimization profile name '${_RULE_PROFILE_NAME}'. Expected one of 'lto', 'size'")
  endif()

  message(STATUS "Enabled optimization profile '${_RULE_PROFILE_NAME}' for targets under ${CMAKE_CURRENT_SOURCE_DIR}: \n"
    "      COPTS: ${_ADDL_COPTS}\n"
    "      INTERFACE COPTS: ${_ADDL_INTERFACE_COPTS}\n"
    "      LINKOPTS: ${_ADDL_LINKOPTS}"
  )
  set(IREE_DEFAULT_COPTS "${IREE_DEFAULT_COPTS};${_ADDL_COPTS}" PARENT_SCOPE)
  set(IREE_INTERFACE_COPTS "${IREE_INTERFACE_COPTS};${_ADDL_INTERFACE_COPTS}" PARENT_SCOPE)
  set(IREE_DEFAULT_LINKOPTS "${IREE_DEFAULT_LINKOPTS};${_ADDL_LINKOPTS}" PARENT_SCOPE)
endfunction()

#-------------------------------------------------------------------------------
# Compiler: Clang/LLVM
#-------------------------------------------------------------------------------

# TODO(benvanik): Clang/LLVM options.

#-------------------------------------------------------------------------------
# Compiler: GCC
#-------------------------------------------------------------------------------

# TODO(benvanik): GCC options.

#-------------------------------------------------------------------------------
# Compiler: MSVC
#-------------------------------------------------------------------------------

if(MSVC)
  if("${CMAKE_C_COMPILER_LAUNCHER}" MATCHES "ccache" OR
     "${CMAKE_CXX_COMPILER_LAUNCHER}" MATCHES "ccache")
    # Disable separate PDB file generation (for debug info) when using ccache.
    # ccache silently falls back to the real compiler when an unsupported flag
    # like /Zi is encountered.
    message(STATUS "Replacing /Zi with /Z7 since ccache is in use and does not support /Zi")
    # https://learn.microsoft.com/en-us/cpp/build/reference/z7-zi-zi-debug-information-format
    string(REPLACE "/Zi" "/Z7" CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG}")
    string(REPLACE "/Zi" "/Z7" CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG}")
    string(REPLACE "/Zi" "/Z7" CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO}")
    string(REPLACE "/Zi" "/Z7" CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
  endif()
endif()

#-------------------------------------------------------------------------------
# Third party: llvm-project
#-------------------------------------------------------------------------------

if(IREE_BUILD_COMPILER)
  # iree-tblgen is not defined using the add_tablegen mechanism as other
  # TableGen tools in LLVM.
  set(IREE_TABLEGEN_EXE "$<TARGET_FILE:iree-tblgen>")
endif()