# FPGA Splice flow

This is a FPGA utility script which embedds the generated rom elf file
into FPGA bitstream.  Script assumes there is pre-generated FPGA bit
file in the build directory. The boot rom mem file is auto generated.

## How to run the script

Utility script to load MEM contents into BRAM FPGA bitfile.

### Usage:

```console
$ cd $REPO_TOP
$ ./util/fpga/splice_nexysvideo.sh
```

Updated output bitfile located : at the same place as raw vivado bitfile @
`build/lowrisc_systems_top_earlgrey_nexysvideo_0.1/synth-vivado/lowrisc_systems_top_earlgrey_nexysvideo_0.1.splice.bit`

This directory contains following files:

* `splice_nexysvideo.sh` - master script
* `bram_load.mmi` - format which vivado tool understands on which FPGA
  BRAM locations the SW contents should go
* `addr4x.py` - utility script used underneath to do address calculation
  to map with FPGA BRAM architecture