| # OpenTitan Earl Grey Chip Datasheet | |
| # Overview | |
|  | |
| The OpenTitan Earl Grey chip is a low-power secure microcontroller that is designed for several use cases requiring hardware security. | |
| The block diagram is shown above and shows the system configuration, including the Ibex processor and all of the memories and comportable IPs. | |
| As can be seen in the block diagram, the system is split into a fast processor core domain that runs on a 100MHz jittery clock, and a peripheral domain that runs at 24MHz. | |
| Further, a portion of the peripheral domain, the analog sensor top and the padring can stay always-on. | |
| The rest of the system can be shut off as part of the sleep mode. | |
| The OpenTitan Earl Grey chip provides the following features: | |
| <table> | |
| <thead style='font-size:100%'> | |
| <tr> | |
| <th colspan="2">OpenTitan Earl Grey Features</th> | |
| </tr> | |
| </thead> | |
| <tbody style='font-size:90%;line-height:110%'> | |
| <tr> | |
| <td> | |
| <ul> | |
| <li>RV32IMCB RISC-V "Ibex" core: | |
| <ul> | |
| <li>3-stage pipeline, single-cycle multiplier</li> | |
| <li>Selected subset of the bit-manipulation extension</li> | |
| <li>4kB instruction cache with 2 ways</li> | |
| <li>RISC-V compliant JTAG DM (debug module)</li> | |
| <li>PLIC (platform level interrupt controller)</li> | |
| <li>U/M (user/machine) execution modes </li> | |
| <li>Enhanced Physical Memory Protection (ePMP)</li> | |
| <li>Security features: | |
| <ul> | |
| <li>Low-latency memory scrambling on the icache</li> | |
| <li>Dual-core lockstep configuration</li> | |
| <li>Data independent timing</li> | |
| <li>Dummy instruction insertion</li> | |
| <li>Bus and register file integrity</li> | |
| <li>Hardened PC</li> | |
| </ul> | |
| </li> | |
| </ul> | |
| </li> | |
| <br></br> | |
| <li>Security peripherals: | |
| <ul> | |
| <li>AES-128/192/256 with ECB/CBC/CFB/OFB/CTR modes</li> | |
| <li>HMAC / SHA2-256</li> | |
| <li>KMAC / SHA3-224, 256, 384, 512, [c]SHAKE-128, 256</li> | |
| <li>Programmable big number accelerator for RSA and ECC (OTBN)</li> | |
| <li>NIST-compliant cryptographically secure random number generator (CSRNG)</li> | |
| <li>Digital wrapper for analog entropy source with FIPS and CC-compliant health checks</li> | |
| <li>Key manager with DICE support</li> | |
| <li>Manufacturing life cycle manager</li> | |
| <li>Alert handler for handling critical security events</li> | |
| <li>OTP controller with access controls and memory scrambling</li> | |
| <li>Flash controller with access controls and memory scrambling</li> | |
| <li>ROM and SRAM controllers with low-latency memory scrambling</li> | |
| </ul> | |
| </li> | |
| </ul> | |
| </td> | |
| <td> | |
| <ul> | |
| <li>Memory: | |
| <ul> | |
| <li>2x512kB banks eFlash</li> | |
| <li>128kB main SRAM</li> | |
| <li>4KB Always ON (AON) retention SRAM</li> | |
| <li>32kB ROM</li> | |
| <li>2kB OTP</li> | |
| </ul> | |
| </li> | |
| <br></br> | |
| <li>IO peripherals: | |
| <ul> | |
| <li>47x multiplexable IO pads with pad control</li> | |
| <li>32x GPIO (using multiplexable IO)</li> | |
| <li>4x UART (using multiplexable IO)</li> | |
| <li>3x I2C with host and device modes (using multiplexable IO)</li> | |
| <li>SPI device (using fixed IO) with TPM, generic, flash and passthrough modes</li> | |
| <li>2x SPI host (using both fixed and multiplexable IO)</li> | |
| <li>USB device at full speed</li> | |
| </ul> | |
| </li> | |
| <br></br> | |
| <li>Other peripherals: | |
| <ul> | |
| <li>Clock, reset and power management</li> | |
| <li>Fixed-frequency timer</li> | |
| <li>Always ON (AON) timer</li> | |
| <li>Pulse-width modulator (PWM)</li> | |
| <li>Pattern Generator</li> | |
| </ul> | |
| </li> | |
| <br></br> | |
| <li>Software: | |
| <ul> | |
| <li>Boot ROM code implementing secure boot and chip configuration</li> | |
| <li>Bare metal applications and validation tests</li> | |
| </ul> | |
| </li> | |
| </ul> | |
| </td> | |
| </tr> | |
| </tbody> | |
| </table> | |
| # Detailed Specification | |
| For more detailed documentation including the pinout and system address map, see [OpenTitan Earl Grey Chip Specification](./design/README.md). | |
| The [OpenTitan Earl Grey Chip DV Document](../dv/README.md) describes the chip-level DV environment and contains the chip-level test plan. |