#!/usr/bin/env python3
# Copyright lowRISC contributors.
# Licensed under the Apache License, Version 2.0, see LICENSE for details.
# SPDX-License-Identifier: Apache-2.0

'''A simulator that runs one instruction at a time, reading from a REPL

The input language is simple (and intended to be generated by another program).
Input should appear with one command per line.

The valid commands are as follows. All arguments are shown here as <argname>.
The integer arguments are read with Python's int() function, so should be
prefixed with "0x" if they are hexadecimal.

    start                Set the PC to zero and start OTBN

    step                 Run one instruction. Print trace information to
                         stdout.

    load_elf <path>      Load the ELF file at <path>, replacing current
                         contents of DMEM and IMEM.

    add_loop_warp <addr> <from> <to>

                         Add a loop warp to the simulation. This will trigger
                         at address <addr> and will jump from iteration <from>
                         to iteration <to>.

    clear_loop_warps     Clear any loop warp rules

    load_d <path>        Replace the current contents of DMEM with <path>
                         (read as an array of 32-bit little-endian words)

    load_i <path>        Replace the current contents of IMEM with <path>
                         (read as an array of 32-bit little-endian words)

    dump_d <path>        Write the current contents of DMEM to <path> (same
                         format as for load).

    print_regs           Write the contents of all registers to stdout (in hex)

    edn_rnd_step         Send 32b RND Data to the model.

    edn_rnd_cdc_done     Finish the RND data write process by signalling RTL
                         is also finished processing 32b packages from EDN.

    edn_urnd_step        Send 32b URND seed data to the model.

    edn_urnd_cdc_done    Finish the URND resseding process by signalling RTL
                         is also finished processing 32b packages from EDN and
                         set the seed.

    edn_flush            Flush EDN data from model because of reset signal in EDN
                         CLOCK DOMAIN

    invalidate_imem      Mark all of IMEM as having invalid ECC checksums

'''

import sys
from typing import List, Optional

from sim.decode import decode_file
from sim.load_elf import load_elf
from sim.sim import OTBNSim


def read_word(arg_name: str, word_data: str, bits: int) -> int:
    '''Try to read an unsigned word of the specified bit length'''
    try:
        value = int(word_data, 0)
    except ValueError:
        raise ValueError('Failed to read {!r} as an integer for <{}> argument.'
                         .format(word_data, arg_name)) from None

    if value < 0 or value >> bits:
        raise ValueError('<{}> argument is {!r}: not representable in {!r} bits.'
                         .format(arg_name, word_data, bits))

    return value


def end_command() -> None:
    '''Print a single '.' to stdout and flush, ending the output for command'''
    print('.')
    sys.stdout.flush()


def check_arg_count(cmd: str, cnt: int, args: List[str]) -> None:
    if len(args) != cnt:
        if cnt == 0:
            txt_cnt = 'no arguments'
        elif cnt == 1:
            txt_cnt = 'exactly one argument'
        else:
            txt_cnt = f'exactly {cnt} arguments'

        raise ValueError(f'{cmd} expects {txt_cnt} arguments. Got {args}.')


def on_start(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Jump to an address given as the (only) argument and start running'''
    check_arg_count('start', 0, args)

    print('START')
    sim.state.ext_regs.commit()
    sim.start(collect_stats=False)

    return None


def on_step(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Step one instruction'''
    check_arg_count('step', 0, args)

    pc = sim.state.pc
    assert 0 == pc & 3

    insn, changes = sim.step(verbose=False)

    print('STALL' if insn is None else insn.rtl_trace(pc))
    for change in changes:
        entry = change.rtl_trace()
        if entry is not None:
            print(entry)

    return None


def on_load_elf(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Load contents of ELF at path given by only argument'''
    check_arg_count('load_elf', 1, args)

    path = args[0]

    print('LOAD_ELF {!r}'.format(path))
    load_elf(sim, path)

    return None


def on_add_loop_warp(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Add a loop warp to the simulation'''
    check_arg_count('add_loop_warp', 3, args)

    try:
        addr = int(args[0], 0)
        if addr < 0:
            raise ValueError('addr is negative')
        from_cnt = int(args[1], 0)
        if from_cnt < 0:
            raise ValueError('from_cnt is negative')
        to_cnt = int(args[2], 0)
        if to_cnt < 0:
            raise ValueError('to_cnt is negative')
    except ValueError as err:
        raise ValueError('Bad argument to add_loop_warp: {}'
                         .format(err)) from None

    print('ADD_LOOP_WARP {:#x} {} {}'.format(addr, from_cnt, to_cnt))
    sim.add_loop_warp(addr, from_cnt, to_cnt)

    return None


def on_clear_loop_warps(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Run until ecall or error'''
    check_arg_count('clear_loop_warps', 0, args)

    sim.loop_warps = {}

    return None


def on_load_d(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Load contents of data memory from file at path given by only argument'''
    check_arg_count('load_d', 1, args)

    path = args[0]

    print('LOAD_D {!r}'.format(path))
    with open(path, 'rb') as handle:
        sim.load_data(handle.read(), has_validity=True)

    return None


def on_load_i(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Load contents of insn memory from file at path given by only argument'''
    check_arg_count('load_i', 1, args)

    path = args[0]

    print('LOAD_I {!r}'.format(path))
    sim.load_program(decode_file(0, path))

    return None


def on_dump_d(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Dump contents of data memory to file at path given by only argument'''
    check_arg_count('dump_d', 1, args)

    path = args[0]

    print('DUMP_D {!r}'.format(path))

    with open(path, 'wb') as handle:
        handle.write(sim.state.dmem.dump_le_words())

    return None


def on_print_regs(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Print registers to stdout'''
    check_arg_count('print_regs', 0, args)

    print('PRINT_REGS')
    for idx, value in enumerate(sim.state.gprs.peek_unsigned_values()):
        print(' x{:<2} = 0x{:08x}'.format(idx, value))
    for idx, value in enumerate(sim.state.wdrs.peek_unsigned_values()):
        print(' w{:<2} = 0x{:064x}'.format(idx, value))

    return None


def on_print_call_stack(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    '''Print call stack to stdout. First element is the bottom of the stack'''
    check_arg_count('print_call_stack', 0, args)

    print('PRINT_CALL_STACK')
    for value in sim.state.peek_call_stack():
        print('0x{:08x}'.format(value))

    return None


def on_edn_rnd_step(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    if len(args) != 1:
        raise ValueError('edn_rnd_step expects exactly 1 argument. Got {}.'
                         .format(args))

    edn_rnd_data = read_word('edn_rnd_step', args[0], 32)

    sim.state.edn_rnd_step(edn_rnd_data)

    return None


def on_edn_urnd_step(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    if len(args) != 1:
        raise ValueError('edn_urnd_step expects exactly 1 argument. Got {}.'
                         .format(args))

    edn_urnd_data = read_word('edn_urnd_step', args[0], 32)

    sim.state.edn_urnd_step(edn_urnd_data)

    return None


def on_edn_flush(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    if len(args) != 0:
        raise ValueError('edn_flush expects zero arguments. Got {}.'
                         .format(args))

    sim.state.edn_flush()

    return None


def on_edn_urnd_cdc_done(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    if len(args) != 0:
        raise ValueError('edn_urnd_cdc_done expects zero arguments. Got {}.'
                         .format(args))

    sim.state.urnd_completed()

    return None


def on_edn_rnd_cdc_done(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    check_arg_count('edn_rnd_cdc_done', 0, args)

    sim.state.rnd_completed()

    return None


def on_invalidate_imem(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    check_arg_count('invalidate_imem', 0, args)

    sim.state.invalidated_imem = True

    return None


def on_reset(sim: OTBNSim, args: List[str]) -> Optional[OTBNSim]:
    if args:
        raise ValueError('reset expects zero arguments. Got {}.'
                         .format(args))

    return OTBNSim()


_HANDLERS = {
    'start': on_start,
    'step': on_step,
    'load_elf': on_load_elf,
    'add_loop_warp': on_add_loop_warp,
    'clear_loop_warps': on_clear_loop_warps,
    'load_d': on_load_d,
    'load_i': on_load_i,
    'dump_d': on_dump_d,
    'print_regs': on_print_regs,
    'print_call_stack': on_print_call_stack,
    'reset': on_reset,
    'edn_rnd_step': on_edn_rnd_step,
    'edn_urnd_step': on_edn_urnd_step,
    'edn_rnd_cdc_done': on_edn_rnd_cdc_done,
    'edn_urnd_cdc_done': on_edn_urnd_cdc_done,
    'edn_flush': on_edn_flush,
    'invalidate_imem': on_invalidate_imem
}


def on_input(sim: OTBNSim, line: str) -> Optional[OTBNSim]:
    '''Process an input command'''
    words = line.split()

    # Just ignore empty lines
    if not words:
        return None

    verb = words[0]
    handler = _HANDLERS.get(verb)
    if handler is None:
        raise RuntimeError('Unknown command: {!r}'.format(verb))

    ret = handler(sim, words[1:])
    print('.')
    sys.stdout.flush()

    return ret


def main() -> int:
    sim = OTBNSim()
    try:
        for line in sys.stdin:
            ret = on_input(sim, line)
            if ret is not None:
                sim = ret

    except KeyboardInterrupt:
        print("Received shutdown request, ending OTBN simulation.")
        return 0
    return 0


if __name__ == '__main__':
    sys.exit(main())