// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{ name: "csrng",
  clocking: [{clock: "clk_i", reset: "rst_ni"}],
  bus_interfaces: [
    { protocol: "tlul", direction: "device" }
  ],
  param_list: [
    // Random netlist constants
    { name:      "RndCnstCsKeymgrDivNonProduction",
      desc:      "Compile-time random bits for csrng state group diversification value",
      type:      "csrng_pkg::cs_keymgr_div_t",
      randcount: "384",
      randtype:  "data",
    }
    { name:      "RndCnstCsKeymgrDivProduction",
      desc:      "Compile-time random bits for csrng state group diversification value",
      type:      "csrng_pkg::cs_keymgr_div_t",
      randcount: "384",
      randtype:  "data",
    }
    // Regular parameters
    { name: "SBoxImpl",
      type: "aes_pkg::sbox_impl_e",
      default: "aes_pkg::SBoxImplCanright",
      desc: "Selection of the S-Box implementation. See aes_pkg.sv.",
      local: "false",
      expose: "true"
    },
  ],
  interrupt_list: [
    { name: "cs_cmd_req_done"
      desc: "Asserted when a command request is completed."}
    { name: "cs_entropy_req"
      desc: "Asserted when a request for entropy has been made."}
    { name: "cs_hw_inst_exc"
      desc: "Asserted when a hardware-attached CSRNG instance encounters a command exception"}
    { name: "cs_fatal_err"
      desc: "Asserted when a FIFO error or a fatal alert occurs. Check the !!ERR_CODE register to get more information."}
  ],
  alert_list: [
    { name: "fatal_alert",
      desc: '''
            This alert triggers (i) if an illegal state machine state is reached, or
            (ii) if an AES fatal alert condition occurs, or (iii) if a fatal integrity
            failure is detected on the TL-UL bus.
            '''
    }
  ],
  inter_signal_list: [
    { struct:  "csrng"
      type:    "req_rsp"
      name:    "csrng_cmd"
      act:     "rsp"
      package: "csrng_pkg"
      width:   "2",
    }
    { struct:  "entropy_src_hw_if"
      type:    "req_rsp",
      name:    "entropy_src_hw_if"
      act:     "req"
      package: "entropy_src_pkg"
    }
    { struct:  "cs_aes_halt"
      type:    "req_rsp",
      name:    "cs_aes_halt"
      act:     "rsp"
      package: "entropy_src_pkg"
    }
    { struct:  "otp_en"
      type:    "uni"
      name:    "otp_en_csrng_sw_app_read"
      act:     "rcv"
      package: "otp_ctrl_pkg"
    }
    { struct:  "lc_tx"
      type:    "uni"
      name:    "lc_hw_debug_en"
      act:     "rcv"
      default: "lc_ctrl_pkg::Off"
      package: "lc_ctrl_pkg"
    }
  ],
  regwidth: "32",
  registers: [
    { name: "REGWEN",
      desc: "Register write enable for all control registers",
      swaccess: "rw0c",
      hwaccess: "none",
      fields: [
        {
            bits: "0",
            desc: ''' When true, all writeable registers can be modified.
            When false, they become read-only.
            '''
            resval: 1
        }
      ]
    },
    { name: "CTRL",
      desc: "Control register",
      swaccess: "rw",
      hwaccess: "hro",
      regwen: "REGWEN",
      tags: [// Exclude from writes to these bits since hardware actions will start.
             "excl:CsrAllTests:CsrExclWrite"]
      fields: [
        {
            bits: "3:0",
            name: "ENABLE",
            desc: '''
                  Setting this field to 0xA will enable the CSRNG module.
                  '''
          resval: "0x5"
        },
        {
            bits: "7:4",
            name: "SW_APP_ENABLE",
            desc: '''
                  Setting this field to 0xA will enable reading from the GENBITS register.
                  This application interface for software (register based) will be enabled
                  only if the efuse_sw_app_enable input is set.
                  '''
          resval: "0x5"
        },
      ]
    },
    {
      name: "CMD_REQ",
      desc: "Command request register",
      swaccess: "wo",
      hwaccess: "hro",
      hwqe: "true",
      fields: [
        { bits: "31:0",
          name: "CMD_REQ",
          desc: '''
                Writing this request with defined CSRNG commands will initiate all
                possible CSRNG actions. The application interface must wait for the
                "ack" to return before issuing new commands.
                '''
        }
      ]
    },
    {
      name: "SW_CMD_STS",
      desc: "Application interface command status register",
      swaccess: "ro",
      hwaccess: "hwo",
      fields: [
        { bits: "0",
          name: "CMD_RDY",
          desc: '''This bit indicates when the command interface is ready to accept commands.
                '''
          resval: "1"
        }
        { bits: "1",
          name: "CMD_STS",
          desc: '''
                This one bit field is the status code returned with the application command ack.
                It is updated each time a command ack is asserted on the internal application
                interface for software use.
                0b0: Request completed successfully
                0b1: Request completed with an error
                '''
          resval: "0"
        }
      ]
    },
    {
      name: "GENBITS_VLD",
      desc: "Generate bits returned valid register",
      swaccess: "ro",
      hwaccess: "hwo",
      hwext: "true",
      fields: [
        { bits: "0",
          name: "GENBITS_VLD",
          desc: "This bit is set when genbits are available on this application interface."
        }
        { bits: "1",
          name: "GENBITS_FIPS",
          desc: "This bit is set when genbits are FIPS/CC compliant."
        }
      ]
    },
    {
      name: "GENBITS",
      desc: "Generate bits returned register",
      swaccess: "ro",
      hwaccess: "hrw",
      hwext: "true",
      hwre: "true",
      fields: [
        { bits: "31:0",
          name: "GENBITS",
          desc: '''
                Reading this register will get the generated bits that were requested with
                the generate request. This register must be four times for each request
                number made. For example, a application command generate request with
                a `creq` value of 4 requires this register to be read 16 times to get all
                of the data out of the FIFO path.
                '''
        }
      ]
    },
    { name: "INT_STATE_NUM",
      desc: "Internal state number register",
      swaccess: "rw",
      hwaccess: "hro",
      hwqe: "true",
      fields: [
        {
            bits: "3:0",
            name: "INT_STATE_NUM",
            desc: '''
                  Setting this field will set the number for which internal state can be
                  selected for a read access. Up to 16 internal state values can be chosen
                  from this register. The actual number of valid internal state fields
                  is set by NHwApps plus 1 software app. For those selections that point
                  to reserved locations (greater than NHwApps plus 1), the returned value
                  will be zero. Writing this register will also reset the internal read
                  pointer for the INT_STATE_VAL register.
                  '''
        },
      ]
    },
    {
      name: "INT_STATE_VAL",
      desc: "Internal state read access register",
      swaccess: "ro",
      hwaccess: "hrw",
      hwext: "true",
      hwre: "true",
      fields: [
        { bits: "31:0",
          name: "INT_STATE_VAL",
          desc: '''
                Reading this register will dump out the contents of the selected internal state field.
                Since the internal state field is 448 bits wide, it will require 14 reads from this
                register to gather the entire field. Once 14 reads have been done, the internal read
                pointer (selects 32 bits of the 448 bit field) will reset to zero. The INT_STATE_NUM
                can be re-written at this time (internal read pointer is also reset), and then
                another internal state field can be read.
                Also, the life cycle state must be one where the signal "lc_hw_debug_en" is asserted
                in order to read any internal state field.
                '''
        }
      ]
    },
    {
      name: "HW_EXC_STS",
      desc: "Hardware instance exception status register",
      swaccess: "rw",
      hwaccess: "hwo",
      fields: [
        { bits: "14:0",
          name: "HW_EXC_STS",
          desc: '''
                Reading this register indicates whether one of the CSRNG HW instances has
                encountered an exception.  Each bit corresponds to a particular hardware
                instance, with bit 0 corresponding to instance HW0, bit 1 corresponding
                to instance HW1, and so forth. (To monitor the status of requests made
                to the SW instance, check the CMD_STS register). Writing a zero to this register
                resets the status bits.
                '''
        }
      ]
    },
    {
      name: "ERR_CODE",
      desc: "Hardware detection of error conditions status register",
      swaccess: "ro",
      hwaccess: "hwo",
      fields: [
        { bits: "0",
          name: "SFIFO_CMD_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                command stage command FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "1",
          name: "SFIFO_GENBITS_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                command stage genbits FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "2",
          name: "SFIFO_CMDREQ_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                cmdreq FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "3",
          name: "SFIFO_RCSTAGE_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                rcstage FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "4",
          name: "SFIFO_KEYVRC_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                keyvrc FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "5",
          name: "SFIFO_UPDREQ_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                updreq FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "6",
          name: "SFIFO_BENCREQ_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                bencreq FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "7",
          name: "SFIFO_BENCACK_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                bencack FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "8",
          name: "SFIFO_PDATA_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                pdata FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "9",
          name: "SFIFO_FINAL_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                final FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "10",
          name: "SFIFO_GBENCACK_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                gbencack FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "11",
          name: "SFIFO_GRCSTAGE_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                grcstage FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "12",
          name: "SFIFO_GGENREQ_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                ggenreq FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "13",
          name: "SFIFO_GADSTAGE_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                gadstage FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "14",
          name: "SFIFO_GGENBITS_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                ggenbits FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "15",
          name: "SFIFO_BLKENC_ERR",
          desc: '''
                This bit will be set to one when an error has been detected for the
                blkenc FIFO. The type of error is reflected in the type status
                bits (bits 28 through 30 of this register).
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "20",
          name: "CMD_STAGE_SM_ERR",
          desc: '''
                This bit will be set to one when an illegal state has been detected for the
                command stage state machine. This error will signal a fatal alert, and also
                an interrupt if enabled.
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "21",
          name: "MAIN_SM_ERR",
          desc: '''
                This bit will be set to one when an illegal state has been detected for the
                main state machine. This error will signal a fatal alert, and also
                an interrupt if enabled.
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "22",
          name: "DRBG_GEN_SM_ERR",
          desc: '''
                This bit will be set to one when an illegal state has been detected for the
                ctr_dbrg gen state machine. This error will signal a fatal alert, and also
                an interrupt if enabled.
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "23",
          name: "DRBG_UPDBE_SM_ERR",
          desc: '''
                This bit will be set to one when an illegal state has been detected for the
                ctr_dbrg update block encode state machine. This error will signal a fatal alert, and also
                an interrupt if enabled.
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "24",
          name: "DRBG_UPDOB_SM_ERR",
          desc: '''
                This bit will be set to one when an illegal state has been detected for the
                ctr_dbrg update out block state machine. This error will signal a fatal alert, and also
                an interrupt if enabled.
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "25",
          name: "AES_CIPHER_SM_ERR",
          desc: '''
                This bit will be set to one when an AES fatal error has been detected.
                This error will signal a fatal alert, and also
                an interrupt if enabled.
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "28",
          name: "FIFO_WRITE_ERR",
          desc: '''
                This bit will be set to one when any of the source bits (bits 0 through 15 of this
                this register) are asserted as a result of an error pulse generated from
                any full FIFO that has been recieved a write pulse.
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "29",
          name: "FIFO_READ_ERR",
          desc: '''
                This bit will be set to one when any of the source bits (bits 0 through 15 of this
                this register) are asserted as a result of an error pulse generated from
                any empty FIFO that has recieved a read pulse.
                This bit will stay set until firmware clears it.
                '''
        }
        { bits: "30",
          name: "FIFO_STATE_ERR",
          desc: '''
                This bit will be set to one when any of the source bits (bits 0 through 15 of this
                this register) are asserted as a result of an error pulse generated from
                any FIFO where both the empty and full status bits are set.
                This bit will stay set until firmware clears it.
                '''
        }
      ]
    },
    { name: "ERR_CODE_TEST",
      desc: "Test error conditions register",
      swaccess: "rw",
      hwaccess: "hro",
      hwqe: "true",
      regwen: "REGWEN",
      fields: [
        {
            bits: "4:0",
            name: "ERR_CODE_TEST",
            desc: '''
                  Setting this field will set the bit number for which an error
                  will be forced in the hardware. This bit number is that same one
                  found in the !!ERR_CODE register. The action of writing this
                  register will force an error pulse. The sole purpose of this
                  register is to test that any error properly propagates to either
                  an interrupt or an alert.
                  '''
        },
      ]
    },
    { name: "SEL_TRACKING_SM",
      desc: "Select debug tracking state machine register",
      swaccess: "wo",
      hwaccess: "hro",
      fields: [
        {
            bits: "1:0",
            name: "SEL_TRACKING_SM",
            desc: '''
                  These encoded bits will select one of four groups of
                  state machine tracking registers. Each tracking debug field is 8 bits
                  wide, so up to four debug fields can be observed at one time.
                  Each tracking field will follow a per instance csrng application command
                  through the csrng design unit.
                  '''
        },
      ]
    },
    { name: "TRACKING_SM_OBS",
      desc: "CSRNG application command tracking state machine observation register",
      swaccess: "ro",
      hwaccess: "hwo",
      fields: [
        { bits: "7:0",
          name: "TRACKING_SM_OBS0",
          desc: '''
                This field will hold csrng command tracking state machine status,
                This field holds tracking information for instance 0 if the
                !!SEL_TRACKING_SM register is set to 0.
                If more than 4 instances are active, then the selection register
                can be programmed to select up to 3 other groups.
                The life cycle state must be set to debug state to read this field.
                '''
          tags: [// Internal HW can modify status register
                 "excl:CsrAllTests:CsrExclCheck"]
          resval: "0"
        }
        { bits: "15:8",
          name: "TRACKING_SM_OBS1",
          desc: '''
                This field will hold csrng command tracking state machine status,
                This field holds tracking information for instance 1 if the
                !!SEL_TRACKING_SM register is set to 0.
                If more than 4 instances are active, then the selection register
                can be programmed to select up to 3 other groups.
                The life cycle state must be set to debug state to read this field.
                '''
          tags: [// Internal HW can modify status register
                 "excl:CsrAllTests:CsrExclCheck"]
          resval: "0"
        }
        { bits: "23:16",
          name: "TRACKING_SM_OBS2",
          desc: '''
                This field will hold csrng command tracking state machine status,
                This field holds tracking information for instance 2 if the
                !!SEL_TRACKING_SM register is set to 0.
                If more than 4 instances are active, then the selection register
                can be programmed to select up to 3 other groups.
                The life cycle state must be set to debug state to read this field.
                '''
          tags: [// Internal HW can modify status register
                 "excl:CsrAllTests:CsrExclCheck"]
          resval: "0"
        }
        { bits: "31:24",
          name: "TRACKING_SM_OBS3",
          desc: '''
                This field will hold csrng command tracking state machine status,
                This field holds tracking information for instance 3 if the
                !!SEL_TRACKING_SM register is set to 0.
                If more than 4 instances are active, then the selection register
                can be programmed to select up to 3 other groups.
                The life cycle state must be set to debug state to read this field.
                '''
          tags: [// Internal HW can modify status register
                 "excl:CsrAllTests:CsrExclCheck"]
          resval: "0"
        }
      ]
    },
  ]
}