// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
//
// AES top-level wrapper

`include "prim_assert.sv"

module aes #(
  parameter bit AES192Enable = 1,    // Can be 0 (disable), or 1 (enable).
  parameter     SBoxImpl     = "lut" // Can be "lut" (LUT-based SBox), "canright",
                                     // "canright_masked_noreuse", or "canright_masked".
                                     // Note: Currently, constant masks are used, this is
                                     // of course not secure.
) (
  input                     clk_i,
  input                     rst_ni,

  // Entropy source interface
  // TODO: This still needs to be connected.
  // See https://github.com/lowRISC/opentitan/issues/1005
  //output logic              entropy_req_o,
  //input  logic              entropy_ack_i,
  //input  logic [63:0]       entropy_i,

  // Bus interface
  input  tlul_pkg::tl_h2d_t tl_i,
  output tlul_pkg::tl_d2h_t tl_o
);

  import aes_reg_pkg::*;

  aes_reg2hw_t reg2hw;
  aes_hw2reg_t hw2reg;

  logic        prng_data_req;
  logic        prng_data_ack;
  logic [63:0] prng_data;
  logic        prng_reseed_req;
  logic        prng_reseed_ack;

  aes_reg_top u_reg (
    .clk_i,
    .rst_ni,
    .tl_i,
    .tl_o,
    .reg2hw,
    .hw2reg,
    .devmode_i(1'b1)
  );

  aes_core #(
    .AES192Enable ( AES192Enable ),
    .SBoxImpl     ( SBoxImpl     )
  ) aes_core (
    .clk_i,
    .rst_ni,

    .prng_data_req_o   ( prng_data_req   ),
    .prng_data_ack_i   ( prng_data_ack   ),
    .prng_data_i       ( prng_data       ),
    .prng_reseed_req_o ( prng_reseed_req ),
    .prng_reseed_ack_i ( prng_reseed_ack ),

    .reg2hw,
    .hw2reg
  );

  aes_prng aes_prng (
    .clk_i,
    .rst_ni,

    .data_req_i   ( prng_data_req   ),
    .data_ack_o   ( prng_data_ack   ),
    .data_o       ( prng_data       ),
    .reseed_req_i ( prng_reseed_req ),
    .reseed_ack_o ( prng_reseed_ack ),

    // TODO: This still needs to be connected to the entropy source.
    // See https://github.com/lowRISC/opentitan/issues/1005
    .entropy_req_o(                      ),
    .entropy_ack_i(                 1'b1 ),
    .entropy_i    ( 64'hFEDCBA9876543210 )
  );

  // All outputs should have a known value after reset
  `ASSERT_KNOWN(TlODValidKnown, tl_o.d_valid)
  `ASSERT_KNOWN(TlOAReadyKnown, tl_o.a_ready)

endmodule