| # Copyright lowRISC contributors. | |
| # Licensed under the Apache License, Version 2.0, see LICENSE for details. | |
| # SPDX-License-Identifier: Apache-2.0 | |
| # | |
| # Meridian RDC Waivers | |
| # Assumes modules defined in run-rdc.tcl | |
| if {[info exists modules] == 0} { | |
| error "modules variable does not exist!" 99 | |
| } | |
| foreach mod $modules { | |
| if {[file exists $RDC_WAIVER_DIR/rdc_waivers.$mod.tcl]} { | |
| source $RDC_WAIVER_DIR/rdc_waivers.$mod.tcl | |
| } | |
| } | |
| # clk_ast_ext_i: Ignore S_GENCLK | |
| set_rule_status -rule {S_GENCLK} -status {Waived} \ | |
| -expression {(ClockTreeSignal=~"IOC6")} \ | |
| -comment {External signal has SW bypass option. But usually not used. So internal generated clock is define ans main clock} | |
| # RstMgrSwRst scenario does not involved in retention logic | |
| set_rule_status -rule {E_RST_METASTABILITY} -status {Waived} \ | |
| -expression {(FromScenario=="RstMgrSwRst") && \ | |
| (MetaStableFlop=~"*u_pinmux_aon.*io_*_retreg*")} \ | |
| -comment {RstMgrSwRst scenario does not involved in retention logic} | |
| # RstMgrSwRst scenario: Xbar should not have any outstanding req. | |
| set_rule_status -rule {E_RST_METASTABILITY} -status {Waived} \ | |
| -expression {(FromScenario=="RstMgrSwRst") && \ | |
| (ResetFlop=~"*.u_reg_if.outstanding_q")} \ | |
| -comment {RstMgrSwRst scenario: Xbar should not have any outstanding req.} | |
| # USBDEV Wake up to PINMUX | |
| set_rule_status -rule {E_RST_METASTABILITY} -status {Waived} \ | |
| -expression {(ResetFlop=~"*.u_usbdev.u_reg.u_wake_control_cdc.u_src_to_dst_req.dst_level_q") && \ | |
| (MetaStableFlop=~"*.u_pinmux_aon.u_usbdev_aon_wake.wake_detect_active_q")} \ | |
| -comment {Suspend request signal is a pulse signal. \ | |
| It is to initiate the wakeup detector FSM inside pinmux. \ | |
| When Power is down, the state machine is already configures.} | |
| # USBDEV SW RST REQ: All reset are in phase (sync assert, sync de-assert) | |
| set_rule_status -rule {E_RST_METASTABILITY} -status {Waived} \ | |
| -expression {(FromScenario=="RstMgrSwRst") && \ | |
| (ResetFlop=~"*.u_usbdev.gen_no_stubbed_*") && \ | |
| (MetaStableFlop=~"*.u_xbar_main.u_asf_41.*.fifo_*ptr*") && \ | |
| (ClockDomains=="USB_CLK::USB_CLK")} \ | |
| -comment {SW Reset is sync assert and sync de-assert. \ | |
| So, when signal crossing the domain, it has no metastability issue.} | |
| # USBDEV, CSR to PAD | |
| set_rule_status -rule {E_RST_METASTABILITY} -status {Waived} \ | |
| -expression {(ResetFlop=~"*.u_usbdev.u_reg.u_phy_pins_drive_d*_o.q*") && \ | |
| (MetaStableFlop=~"USB_*")} \ | |
| -comment {For AonPok, MainPok drop cases, the module floats the PAD \ | |
| intentionally. If the PADs should drive values, the values are \ | |
| pre-configured before entering to the low power modes. \ | |
| For SW_RST_REQ cases, SW should correctly configure the pull-ups, \ | |
| pull-downs prior to resetting the USBDEV IP.} | |
| # Ibex Clock Gating | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression { \ | |
| (ResetFlop=~"*.u_rv_core_ibex.u_core.g_clock_en_secure.u_prim_core_busy_flop.gen_generic.u_impl_generic.q_o[0]") && \ | |
| (MetaStableFlop=~"*.u_rv_core_ibex.u_core.core_clock_gate_i.gen_generic.u_impl_generic.en_latch")} \ | |
| -comment {If clockgating enble is reset, it affects the gating cell when \ | |
| CLK is 0 value.} | |
| # PINMUX CSR to SPI_DEV PADs | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(ResetFlop=~"*.u_pinmux_aon.dio*.pull_en") && \ | |
| (MetaStableFlop=~"SPI_DEV_*")} \ | |
| -comment {POR_N resets SPI_DEV. The SPI_CLK portion is in idle state.} | |
| # PINMUX Retention to SPI_HOST | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(ResetFlop=~"*.u_pinmux_aon.dio_oe_retreg_q*") && \ | |
| (MetaStableFlop=~"SPI_HOST_CLK")} \ | |
| -comment {SPI_HOST_CLK is in idle when POR_N is asserted.} | |
| # PINMUX Retention to USB | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(ResetFlop=~"*.u_pinmux_aon.dio_oe_retreg_q*") && \ | |
| (MetaStableFlop=~"USB_*")} \ | |
| -comment {USB is in idle when POR_N is asserted.} | |
| # AES Clock Gating | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*clk_main_aes_trans*") && \ | |
| (MetaStableFlop=~"*u_clk_main_aes_trans.u_cg.*en_latch")} \ | |
| -comment {POR_N resets AES module too.} | |
| # HMAC Clock Gating | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*clk_main_hmac_trans*") && \ | |
| (MetaStableFlop=~"*u_clk_main_hmac_trans.u_cg.*en_latch")} \ | |
| -comment {POR_N resets HMAC module too.} | |
| # KMAC Clock Gating | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*clk_main_kmac_trans*") && \ | |
| (MetaStableFlop=~"*u_clk_main_kmac_trans.u_cg.*en_latch")} \ | |
| -comment {POR_N resets KMAC module too.} | |
| # OTBN Clock Gating | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*clk_main_otbn_trans*") && \ | |
| (MetaStableFlop=~"*u_clk_main_otbn_trans.u_cg.*en_latch")} \ | |
| -comment {POR_N resets OTBN module too.} | |
| # SW_EN to CG | |
| create_view_criteria -name PorNSwEnCg -rule E_RST_METASTABILITY \ | |
| -criteria {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*.u_clkmgr_aon.*_sw_en_sync*")} | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*.u_clkmgr_aon.*io_div2_peri_sw_en_sync*") && \ | |
| (MetaStableFlop=~"*.u_clk_io_div2_peri_cg.*")} | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*.u_clkmgr_aon.*io_peri_sw_en_sync*") && \ | |
| (MetaStableFlop=~"*.u_clk_io_peri_cg.*")} | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*.u_clkmgr_aon.*io_div4_peri_sw_en_sync*") && \ | |
| (MetaStableFlop=~"*.u_clk_io_div4_peri_cg.*")} | |
| set_rule_status -rule E_RST_METASTABILITY -status Waived \ | |
| -expression {(SourceReset=="POR_N") && \ | |
| (ResetFlop=~"*.u_clkmgr_aon.*usb_peri_sw_en_sync*") && \ | |
| (MetaStableFlop=~"*.u_clk_usb_peri_cg.*")} | |
| # SPI_HOST_CLK | |
| set_rule_status -rule {E_RST_METASTABILITY} -status {Waived} \ | |
| -expression {(ResetFlop=~"*u_spi_host*u_sck_flop*") && \ | |
| (MetaStableFlop=~"SPI_HOST_CLK")} \ | |
| -comment {If SPI_HOST receives a reset, CS_L will be de-asserted. \ | |
| Any transactions will be cancelled.} | |
| # W_ASYNC_RST_FLOPS | |
| set_rule_status -rule W_ASYNC_RST_FLOPS -status Waived \ | |
| -expression {(DrivingSignal=~"*strap_sampling.tap_strap_q*")} \ | |
| -comment {STRAP can be changed. \ | |
| However, whenever the tap sample is changed, TRST_N holds the \ | |
| reset state. So, all TAPs remain in the reset state. \ | |
| Async reset glitch won't affect the design. } | |
| set_rule_status -rule W_ASYNC_RST_FLOPS -status Waived \ | |
| -expression {(DrivingSignal=~"*.u_rv_dm.u_pm_en_sync.*")} \ | |
| -comment {LifeCycle HW Debug Enable signal is static and determined \ | |
| at boot time.} |