// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0

#include "sw/device/boot_rom/bootstrap.h"

#include "sw/device/boot_rom/spiflash_frame.h"
#include "sw/device/lib/arch/device.h"
#include "sw/device/lib/base/log.h"
#include "sw/device/lib/base/memory.h"
#include "sw/device/lib/base/mmio.h"
#include "sw/device/lib/dif/dif_gpio.h"
#include "sw/device/lib/flash_ctrl.h"
#include "sw/device/lib/hw_sha256.h"
#include "sw/device/lib/runtime/hart.h"
#include "sw/device/lib/spi_device.h"

#include "hw/top_earlgrey/sw/autogen/top_earlgrey.h"

#define GPIO_BOOTSTRAP_BIT_MASK 0x00020000u

/**
 * Check if flash is blank to determine if bootstrap is needed.
 *
 * TODO: Update this to check bootstrap pin instead in Verilator.
 */
static bool bootstrap_requested(void) {
  // The following flash empty-sniff-check is done this way due to the lack of
  // clear eflash reset in SIM environments.
  if (kDeviceType == kDeviceSimVerilator) {
    mmio_region_t flash_region = mmio_region_from_addr(FLASH_MEM_BASE_ADDR);
    uint32_t value = mmio_region_read32(flash_region, 0x0);
    return value == 0 || value == UINT32_MAX;
  }

  // Initialize GPIO device.
  dif_gpio_t gpio;
  dif_gpio_config_t gpio_config = {
      .base_addr = mmio_region_from_addr(TOP_EARLGREY_GPIO_BASE_ADDR)};
  dif_gpio_init(&gpio_config, &gpio);

  uint32_t gpio_in;
  dif_gpio_all_read(&gpio, &gpio_in);
  return (gpio_in & GPIO_BOOTSTRAP_BIT_MASK) != 0;
}

/**
 * Erase all flash, and verify blank.
 */
static int erase_flash(void) {
  if (flash_bank_erase(FLASH_BANK_0) != 0) {
    return E_BS_ERASE;
  }
  if (flash_bank_erase(FLASH_BANK_1) != 0) {
    return E_BS_ERASE;
  }
  if (flash_check_empty() == 0) {
    return E_BS_NOTEMPTY;
  }

  return 0;
}

/**
 * Compares the SHA256 hash of the recieved data with the recieved hash.
 *
 * Returns true if the hashes match.
 */
static bool check_frame_hash(const spiflash_frame_t *frame) {
  uint8_t hash[sizeof(frame->header.hash)];
  uint8_t *data = ((uint8_t *)frame) + sizeof(hash);
  hw_SHA256_hash(data, sizeof(spiflash_frame_t) - sizeof(hash), hash);

  return memcmp(hash, frame->header.hash, sizeof(hash)) == 0;
}

/**
 * Load spiflash frames from the SPI interface.
 *
 * This function checks that the sequence numbers and hashes of the frames are
 * correct before programming them into flash.
 * */
static int bootstrap_flash(void) {
  uint8_t ack[SHA256_DIGEST_SIZE] = {0};
  uint32_t expected_frame_num = 0;
  while (true) {
    if (spid_bytes_available() >= sizeof(spiflash_frame_t)) {
      spiflash_frame_t frame;
      spid_read_nb(&frame, sizeof(spiflash_frame_t));

      uint32_t frame_num = SPIFLASH_FRAME_NUM(frame.header.frame_num);
      LOG_INFO("Processing frame #%d, expecting #%d", frame_num,
               expected_frame_num);

      if (frame_num == expected_frame_num) {
        if (!check_frame_hash(&frame)) {
          LOG_ERROR("Detected hash mismatch on frame #%d", frame_num);
          spid_send(ack, sizeof(ack));
          continue;
        }

        hw_SHA256_hash(&frame, sizeof(spiflash_frame_t), ack);
        spid_send(ack, sizeof(ack));

        if (expected_frame_num == 0) {
          flash_default_region_access(/*rd_en=*/true, /*prog_en=*/true,
                                      /*erase_en=*/true);
          int flash_error = erase_flash();
          if (flash_error != 0) {
            return flash_error;
          }
          LOG_INFO("Flash erase successful");
        }

        if (flash_write(frame.header.flash_offset, frame.data,
                        SPIFLASH_FRAME_DATA_WORDS) != 0) {
          return E_BS_WRITE;
        }

        ++expected_frame_num;
        if (SPIFLASH_FRAME_IS_EOF(frame.header.frame_num)) {
          LOG_INFO("Bootstrap: DONE!");
          return 0;
        }
      } else {
        // Send previous ack if unable to verify current frame.
        spid_send(ack, sizeof(ack));
      }
    }
  }
}

int bootstrap(void) {
  if (!bootstrap_requested()) {
    return 0;
  }
  // SPI device is only initialized in bootstrap mode.
  LOG_INFO("Bootstrap requested, initialising HW...");
  spid_init();
  flash_init_block();

  LOG_INFO("HW initialisation completed, waiting for SPI input...");
  int error = bootstrap_flash();
  if (error != 0) {
    error |= erase_flash();
    LOG_ERROR("Bootstrap error: 0x%x", error);
  }

  // Always make sure to revert flash_ctrl access to default settings.
  // bootstrap_flash enables access to flash to perform update.
  flash_default_region_access(/*rd_en=*/false, /*prog_en=*/false,
                              /*erase_en=*/false);
  return error;
}