diff --git a/sw/device/lib/pinmux.c b/sw/device/lib/pinmux.c
index 643e44b49..a07e286e1 100644
--- a/sw/device/lib/pinmux.c
+++ b/sw/device/lib/pinmux.c
@@ -61,26 +61,6 @@ void pinmux_init(void) {
   mask = PINMUX_MIO_OUTSEL_0_OUT_0_MASK;
   mmio_region_write32(reg32, reg_offset, reg_value & mask);

-  // Configure UART1 RX input to connect to MIO pad IOC8
-  reg32 = mmio_region_from_addr(PINMUX0_BASE_ADDR +
-                                PINMUX_MIO_PERIPH_INSEL_0_REG_OFFSET);
-  reg_value = kTopEarlgreyPinmuxInselIoc8;
-  // We've got one insel configuration field per register. Hence, we have to
-  // convert the enumeration index into a byte address using << 2.
-  reg_offset = kTopEarlgreyPinmuxPeripheralInUart1Rx << 2;
-  mask = PINMUX_MIO_PERIPH_INSEL_0_IN_0_MASK;
-  mmio_region_write32(reg32, reg_offset, reg_value & mask);
-
-  // Configure UART1 TX output to connect to MIO pad IOC9
-  reg32 =
-      mmio_region_from_addr(PINMUX0_BASE_ADDR + PINMUX_MIO_OUTSEL_0_REG_OFFSET);
-  reg_value = kTopEarlgreyPinmuxOutselUart1Tx;
-  // We've got one insel configuration field per register. Hence, we have to
-  // convert the enumeration index into a byte address using << 2.
-  reg_offset = kTopEarlgreyPinmuxMioOutIoc9 << 2;
-  mask = PINMUX_MIO_OUTSEL_0_OUT_0_MASK;
-  mmio_region_write32(reg32, reg_offset, reg_value & mask);
-
   // Configure USBDEV SENSE outputs to be high-Z (IOR0, IOR1)
   reg32 =
       mmio_region_from_addr(PINMUX0_BASE_ADDR + PINMUX_MIO_OUTSEL_0_REG_OFFSET);
diff --git a/sw/device/lib/testing/test_rom/test_rom_start.S b/sw/device/lib/testing/test_rom/test_rom_start.S
index 7092c858a..101d3bc7e 100644
--- a/sw/device/lib/testing/test_rom/test_rom_start.S
+++ b/sw/device/lib/testing/test_rom/test_rom_start.S
@@ -146,47 +146,6 @@ _start:
   li   t0, CLKMGR_CLK_HINTS_REG_RESVAL
   sw   t0, CLKMGR_CLK_HINTS_REG_OFFSET(a0)

-  // Check if AST initialization should be skipped.
-  li   a0, (TOP_EARLGREY_OTP_CTRL_CORE_BASE_ADDR + \
-            OTP_CTRL_SW_CFG_WINDOW_REG_OFFSET)
-  lw   t0, OTP_CTRL_PARAM_CREATOR_SW_CFG_AST_INIT_EN_OFFSET(a0)
-  li   t1, MULTIBIT_ASM_BOOL4_TRUE
-  bne  t0, t1, .L_ast_init_skip
-
-  // Copy the AST configuration from OTP.
-  li   a0, (TOP_EARLGREY_AST_BASE_ADDR + AST_REGA_0_REG_OFFSET)
-  li   a1, (TOP_EARLGREY_AST_BASE_ADDR + AST_REGAL_REG_OFFSET + 4)
-  li   a2, (TOP_EARLGREY_OTP_CTRL_CORE_BASE_ADDR + \
-            OTP_CTRL_SW_CFG_WINDOW_REG_OFFSET + \
-            OTP_CTRL_PARAM_CREATOR_SW_CFG_AST_CFG_OFFSET)
-  call crt_section_copy
-
-  // Wait for AST initialization to complete.
-  li   a0, TOP_EARLGREY_SENSOR_CTRL_BASE_ADDR
-.L_ast_done_loop:
-  lw   t0, SENSOR_CTRL_STATUS_REG_OFFSET(a0)
-  srli t0, t0, SENSOR_CTRL_STATUS_AST_INIT_DONE_BIT // no-op as bit index is currently 0
-  andi t0, t0, 0x1
-  beqz t0, .L_ast_done_loop
-
-.L_ast_init_skip:
-  // Enable entropy complex - this is not the full enable
-  li   a0, TOP_EARLGREY_ENTROPY_SRC_BASE_ADDR
-  li   t0, 0x555055
-  sw   t0, ENTROPY_SRC_CONF_REG_OFFSET(a0)
-
-  li   a0, TOP_EARLGREY_ENTROPY_SRC_BASE_ADDR
-  li   t0, 0xa
-  sw   t0, ENTROPY_SRC_MODULE_ENABLE_REG_OFFSET(a0)
-
-  li   a0, TOP_EARLGREY_CSRNG_BASE_ADDR
-  li   t0, 0xaaa
-  sw   t0, CSRNG_CTRL_REG_OFFSET(a0)
-
-  li   a0, TOP_EARLGREY_EDN0_BASE_ADDR
-  li   t0, 0x55aa
-  sw   t0, EDN_CTRL_REG_OFFSET(a0)
-
   // Remove address space protections by configuring entry 15 as
   // read-write-execute for the entire address space and then clearing
   // all other entries.
diff --git a/sw/device/sca/aes_serial.c b/sw/device/sca/aes_serial.c
index aee8a61f3..b910e1c34 100644
--- a/sw/device/sca/aes_serial.c
+++ b/sw/device/sca/aes_serial.c
@@ -199,18 +199,13 @@ int main(void) {
   sca_init(kScaTriggerSourceAes, kScaPeripheralAes);
   sca_get_uart(&uart1);

-  LOG_INFO("Running AES serial");
-
-  LOG_INFO("Initializing simple serial interface to capture board.");
   simple_serial_init(uart1);
   simple_serial_register_handler('k', aes_serial_set_key);
   simple_serial_register_handler('p', aes_serial_single_encrypt);
   simple_serial_register_handler('b', aes_serial_batch_encrypt);

-  LOG_INFO("Initializing AES unit.");
   init_aes();

-  LOG_INFO("Starting simple serial packet handling.");
   while (true) {
     simple_serial_process_packet();
   }
diff --git a/sw/device/sca/lib/meson.build b/sw/device/sca/lib/meson.build
index 3a613b2b8..fa939775a 100644
--- a/sw/device/sca/lib/meson.build
+++ b/sw/device/sca/lib/meson.build
@@ -17,8 +17,6 @@ sw_sca_lib_sca  = declare_dependency(
       sw_lib_dif_gpio,
       sw_lib_dif_rv_timer,
       sw_lib_dif_uart,
-      sw_lib_dif_csrng,
-      sw_lib_dif_edn,
       sw_lib_irq,
       sw_lib_mmio,
       sw_lib_pinmux,
diff --git a/sw/device/sca/lib/sca.c b/sw/device/sca/lib/sca.c
index 3c0c86f26..7354aa9cb 100644
--- a/sw/device/sca/lib/sca.c
+++ b/sw/device/sca/lib/sca.c
@@ -7,8 +7,6 @@
 #include "sw/device/lib/arch/device.h"
 #include "sw/device/lib/base/bitfield.h"
 #include "sw/device/lib/dif/dif_clkmgr.h"
-#include "sw/device/lib/dif/dif_csrng.h"
-#include "sw/device/lib/dif/dif_edn.h"
 #include "sw/device/lib/dif/dif_entropy_src.h"
 #include "sw/device/lib/dif/dif_gpio.h"
 #include "sw/device/lib/dif/dif_rv_timer.h"
@@ -58,13 +56,9 @@ enum {
   kRvTimerHart = kTopEarlgreyPlicTargetIbex0,
 };

-static dif_uart_t uart0;
 static dif_uart_t uart1;
 static dif_gpio_t gpio;
 static dif_rv_timer_t timer;
-static dif_csrng_t csrng;
-static dif_edn_t edn0;
-static dif_edn_t edn1;

 // TODO(alphan): Handle return values as long as they don't affect capture rate.

@@ -80,13 +74,9 @@ static void sca_init_uart(void) {
   };

   IGNORE_RESULT(dif_uart_init(
-      mmio_region_from_addr(TOP_EARLGREY_UART0_BASE_ADDR), &uart0));
-  IGNORE_RESULT(dif_uart_configure(&uart0, uart_config));
-  base_uart_stdout(&uart0);
-
-  IGNORE_RESULT(dif_uart_init(
-      mmio_region_from_addr(TOP_EARLGREY_UART1_BASE_ADDR), &uart1));
+      mmio_region_from_addr(TOP_EARLGREY_UART0_BASE_ADDR), &uart1));
   IGNORE_RESULT(dif_uart_configure(&uart1, uart_config));
+  base_uart_stdout(&uart1);
 }

 /**
@@ -127,25 +117,6 @@ static void sca_init_timer(void) {
   irq_global_ctrl(true);
 }

-/**
- * Initializes the CSRNG handle.
- */
-static void sca_init_csrng(void) {
-  IGNORE_RESULT(dif_csrng_init(
-      mmio_region_from_addr(TOP_EARLGREY_CSRNG_BASE_ADDR), &csrng));
-}
-
-/**
- * Initializes the EDN handle.
- */
-static void sca_init_edn(void) {
-  IGNORE_RESULT(
-      dif_edn_init(mmio_region_from_addr(TOP_EARLGREY_EDN0_BASE_ADDR), &edn0));
-
-  IGNORE_RESULT(
-      dif_edn_init(mmio_region_from_addr(TOP_EARLGREY_EDN1_BASE_ADDR), &edn1));
-}
-
 /**
  * Override default Timer ISR.
  *
@@ -172,20 +143,6 @@ void ottf_timer_isr(void) {
  * @param disable Set of peripherals to disable.
  */
 void sca_disable_peripherals(sca_peripherals_t disable) {
-  if (disable & kScaPeripheralEdn) {
-    IGNORE_RESULT(dif_edn_stop(&edn0));
-    IGNORE_RESULT(dif_edn_stop(&edn1));
-  }
-  if (disable & kScaPeripheralCsrng) {
-    IGNORE_RESULT(dif_csrng_stop(&csrng));
-  }
-  if (disable & kScaPeripheralEntropy) {
-    dif_entropy_src_t entropy;
-    IGNORE_RESULT(dif_entropy_src_init(
-        mmio_region_from_addr(TOP_EARLGREY_ENTROPY_SRC_BASE_ADDR), &entropy));
-    IGNORE_RESULT(dif_entropy_src_disable(&entropy));
-  }
-
   // Disable HMAC, KMAC, OTBN and USB clocks through CLKMGR DIF.
   dif_clkmgr_t clkmgr;
   IGNORE_RESULT(dif_clkmgr_init(
@@ -199,14 +156,6 @@ void sca_disable_peripherals(sca_peripherals_t disable) {
     IGNORE_RESULT(dif_clkmgr_hintable_clock_set_hint(
         &clkmgr, CLKMGR_CLK_HINTS_CLK_MAIN_HMAC_HINT_BIT, kDifToggleDisabled));
   }
-  if (disable & kScaPeripheralKmac) {
-    IGNORE_RESULT(dif_clkmgr_hintable_clock_set_hint(
-        &clkmgr, CLKMGR_CLK_HINTS_CLK_MAIN_KMAC_HINT_BIT, kDifToggleDisabled));
-  }
-  if (disable & kScaPeripheralOtbn) {
-    IGNORE_RESULT(dif_clkmgr_hintable_clock_set_hint(
-        &clkmgr, CLKMGR_CLK_HINTS_CLK_MAIN_OTBN_HINT_BIT, kDifToggleDisabled));
-  }
   if (disable & kScaPeripheralUsb) {
     IGNORE_RESULT(dif_clkmgr_gateable_clock_set_enabled(
         &clkmgr, CLKMGR_CLK_ENABLES_CLK_USB_PERI_EN_BIT, kDifToggleDisabled));
@@ -221,8 +167,6 @@ void sca_init(sca_trigger_source_t trigger, sca_peripherals_t enable) {
   sca_init_uart();
   sca_init_gpio(trigger);
   sca_init_timer();
-  sca_init_csrng();
-  sca_init_edn();
   sca_disable_peripherals(~enable);
 }

diff --git a/sw/device/tests/aes_smoketest.c b/sw/device/tests/aes_smoketest.c
index 4667a550a..bea5d3bf5 100644
--- a/sw/device/tests/aes_smoketest.c
+++ b/sw/device/tests/aes_smoketest.c
@@ -7,7 +7,6 @@
 #include "sw/device/lib/dif/dif_aes.h"
 #include "sw/device/lib/runtime/log.h"
 #include "sw/device/lib/testing/check.h"
-#include "sw/device/lib/testing/entropy_testutils.h"
 #include "sw/device/lib/testing/test_framework/ottf.h"

 #include "hw/top_earlgrey/sw/autogen/top_earlgrey.h"
@@ -66,9 +65,6 @@ bool test_main(void) {

   LOG_INFO("Running AES test");

-  // First of all, we need to get the entropy complex up and running.
-  entropy_testutils_boot_mode_init();
-
   // Initialise AES.
   CHECK_DIF_OK(
       dif_aes_init(mmio_region_from_addr(TOP_EARLGREY_AES_BASE_ADDR), &aes));
diff --git a/sw/device/tests/meson.build b/sw/device/tests/meson.build
index 2e822c5f3..2da8fc3be 100644
--- a/sw/device/tests/meson.build
+++ b/sw/device/tests/meson.build
@@ -248,7 +248,6 @@ aes_smoketest_lib = declare_dependency(
       sw_lib_dif_aes,
       sw_lib_mmio,
       sw_lib_runtime_log,
-      sw_lib_testing_entropy_testutils,
       sw_lib_testing_test_status,
     ],
   ),