// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0

#ifndef OPENTITAN_SW_DEVICE_LIB_DIF_DIF_KMAC_H_
#define OPENTITAN_SW_DEVICE_LIB_DIF_DIF_KMAC_H_

/**
 * @file
 * @brief <a href="/hw/ip/kmac/doc/">KMAC</a> Device Interface Functions
 */

#include <stdint.h>

#include "sw/device/lib/base/mmio.h"
#include "sw/device/lib/dif/dif_warn_unused_result.h"

#ifdef __cplusplus
extern "C" {
#endif  // __cplusplus

/**
 * This API implements an interface for the KMAC hardware.
 *
 * The KMAC hardware implements the following cryptographic hash and message
 * authentication code (MAC) functions:
 *
 * - SHA-3 [1]
 * - SHAKE [1]
 * - cSHAKE [2]
 * - KMAC [2]
 *
 * The following sequence of operations is required to initialize the KMAC
 * hardware:
 *
 * - `dif_kmac_init()`
 * - `dif_kmac_configure()`
 *
 * If configuration changes are required then `dif_kmac_configure` can be called
 * again so long as there are no operations in progress.
 *
 * The following sequence of operations is required to execute an operation:
 *
 * - `dif_kmac_{sha3,shake,cshake,kmac}_start()`
 * - `dif_kmac_absorb()`
 * - `dif_kmac_squeeze()`
 * - `dif_kmac_end()`
 *
 * This is a streaming API and the `dif_kmac_absorb` and `dif_kmac_squeeze`
 * functions may be called multiple times during a single operation. Once
 * `dif_kmac_squeeze` has been called however no further `dif_kmac_absorb` calls
 * may be made. See NIST FIPS 202 [1] for more information about the sponge
 * construction and the 'absorbing' and 'squeezing' states.
 *
 * Please see the following documentation for more information about the KMAC
 * hardware:
 * https://docs.opentitan.org/hw/ip/kmac/doc/
 *
 * References:
 * [1] - NIST FIPS 202
 *       SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions
 *       http://dx.doi.org/10.6028/NIST.FIPS.202
 * [2] - NIST Special Publication 800-185
 *       SHA-3 Derived Functions: cSHAKE, KMAC, TupleHash and ParallelHash
 *       https://doi.org/10.6028/NIST.SP.800-185
 */

/**
 * A toggle state: enabled, or disabled.
 *
 * This enum may be used instead of a `bool` when describing an enabled/disabled
 * state.
 */
typedef enum dif_kmac_toggle {
  /*
   * The "enabled" state.
   */
  kDifKmacToggleEnabled,
  /**
   * The "disabled" state.
   */
  kDifKmacToggleDisabled,
} dif_kmac_toggle_t;

/**
 * Hardware instantiation parameters for KMAC.
 *
 * This struct describes information about the underlying hardware that is
 * not determined until the hardware design is used as part of a top-level
 * design.
 */
typedef struct dif_kmac_params {
  /**
   * The base address for the KMAC hardware registers.
   */
  mmio_region_t base_addr;
} dif_kmac_params_t;

/**
 * Supported entropy modes.
 *
 * Entropy may be provided by the entropy distribution network (EDN) or using a
 * seed provided by software.
 */
typedef enum dif_kmac_entropy_mode {
  kDifKmacEntropyModeIdle = 0,
  kDifKmacEntropyModeEdn,
  kDifKmacEntropyModeSoftware,
} dif_kmac_entropy_mode_t;

/**
 * Runtime configuration for KMAC.
 *
 * This struct describes runtime information for configuration of the hardware.
 */
typedef struct dif_kmac_config {
  /**
   * Entropy mode specifying the source of entropy (EDN or software).
   */
  dif_kmac_entropy_mode_t entropy_mode;

  /**
   * Entropy fast process mode when enabled prevents the KMAC unit consuming
   * entropy unless it is processing a secret key.
   */
  bool entropy_fast_process;

  /**
   * Entropy seed. Only used when the source of entropy is software.
   */
  uint64_t entropy_seed;

  /**
   * Entropy reseed interval in clock cycles. Only used when the source of
   * entropy is EDN.
   */
  uint16_t entropy_reseed_interval;

  /**
   * Number of clock cycles to wait for the EDN to reseed the entropy generator
   * before an error is raised (see `dif_kmac_get_error`). If 0 the unit will
   * wait forever.
   */
  uint16_t entropy_wait_timer;

  /**
   * Convert the message to big-endian byte order.
   * Note: this option currently had no effect since the message is sent a byte
   * at a time but will in the future.
   */
  bool message_big_endian;

  /**
   * Convert the output state (digest) to big-endian byte order on a word
   * granularity.
   */
  bool output_big_endian;

  /**
   * Place kmac inside key sideload mode
   */
  bool sideload;

} dif_kmac_config_t;

/**
 * A handle to KMAC.
 *
 * This type should be treated as opaque by users.
 *
 * Note: contains mutable information about the state.
 */
typedef struct dif_kmac {
  dif_kmac_params_t params;

  /**
   * Whether the 'squeezing' phase has been started.
   */
  bool squeezing;

  /**
   * Flag indicating whether the output length (d) should be right encoded in
   * software and appended to the end of the message. The output length is
   * required to be appended to the message as part of a KMAC operation.
   */
  bool append_d;

  /**
   * Offset into the output state.
   */
  size_t offset;

  /**
   * The rate (r) in 32-bit words.
   */
  size_t r;

  /**
   * The output length (d) in 32-bit words.
   *
   * If the output length is not fixed then this field will be set to 0.
   *
   * Note: if the output length is fixed length will be modified to ensure that
   * `d - offset` always accurately reflects the number of words remaining.
   */
  size_t d;
} dif_kmac_t;

/**
 * The result of a KMAC operation.
 */
typedef enum dif_kmac_result {
  /**
   * Indicates that the operation succeeded.
   */
  kDifKmacOk,
  /**
   * Indicates some unspecified failure.
   */
  kDifKmacError,
  /**
   * Indicates that some parameter passed into a function failed a
   * precondition.
   *
   * When this value is returned, no hardware operations occurred.
   */
  kDifKmacBadArg,

  /**
   * The operation failed because writes to a required register are
   * disabled.
   */
  kDifKmacLocked,

  /**
   * The operation did not fully complete. Input and/or output parameters may
   * have only been partially processed. See the function description for more
   * information about how to retry or continue the operation.
   */
  kDifKmacIncomplete,
} dif_kmac_result_t;

/**
 * A KMAC interrupt request type.
 */
typedef enum dif_kmac_irq {
  /**
   * KMAC/SHA3 absorbing has been completed.
   *
   * Associated with the `kmac.INTR_STATE.kmac_done` hardware interrupt.
   */
  kDifKmacIrqDone = 0,

  /**
   * Message FIFO empty condition.
   *
   * Associated with the `kmac.INTR_STATE.fifo_empty` hardware interrupt.
   */
  kDifKmacIrqFifoEmpty,

  /**
   * KMAC/SHA3 error occurred.
   *
   * Associated with the `kmac.INTR_STATE.kmac_err` hardware interrupt.
   */
  kDifKmacIrqError,
} dif_kmac_irq_t;

/**
 * Supported SHA-3 modes of operation.
 */
typedef enum dif_kmac_mode_sha3 {
  /** SHA-3 with 224 bit strength. */
  kDifKmacModeSha3Len224,
  /** SHA-3 with 256 bit strength. */
  kDifKmacModeSha3Len256,
  /** SHA-3 with 384 bit strength. */
  kDifKmacModeSha3Len384,
  /** SHA-3 with 512 bit strength. */
  kDifKmacModeSha3Len512,
} dif_kmac_mode_sha3_t;

/**
 * Supported SHAKE modes of operation.
 */
typedef enum dif_kmac_mode_shake {
  /** SHAKE with 128 bit strength. */
  kDifKmacModeShakeLen128,
  /** SHAKE with 256 bit strength. */
  kDifKmacModeShakeLen256,
} dif_kmac_mode_shake_t;

/**
 * Supported cSHAKE modes of operation.
 */
typedef enum dif_kmac_mode_cshake {
  /** cSHAKE with 128 bit strength. */
  kDifKmacModeCshakeLen128,
  /** cSHAKE with 256 bit strength. */
  kDifKmacModeCshakeLen256,
} dif_kmac_mode_cshake_t;

/**
 * Supported KMAC modes of operation.
 */
typedef enum dif_kmac_mode_kmac {
  /** KMAC with 128 bit strength. */
  kDifKmacModeKmacLen128,
  /** KMAC with 256 bit strength. */
  kDifKmacModeKmacLen256,
} dif_kmac_mode_kmac_t;

/**
 * Maximum lengths supported by the KMAC unit.
 */
enum {

  /**
   * The maximum length in bytes of a customization string (S) before it has
   * been encoded.
   */
  kDifKmacMaxCustomizationStringLen = 32,

  /**
   * The maximum number of bytes required to encode the length of the
   * customization string.
   *
   * Assumes maximum customization string length of 32 bytes (256 bits).
   */
  kDifKmacMaxCustomizationStringOverhead = 3,

  /**
   * The maximum length in bytes of a function name (N) before it has been
   * encoded.
   */
  kDifKmacMaxFunctionNameLen = 4,

  /**
   * The maximum number of bytes required to encode the length of the function
   * name.
   *
   * Assumes maximum function name length of 4 bytes (32 bits).
   */
  kDifKmacMaxFunctionNameOverhead = 2,

  /**
   * The maximum output length (L) that can be set when starting a KMAC
   * operation.
   *
   * The length is in 32-bit words and is designed to be low enough that the
   * length in bits can still be represented by an unsigned 32-bit integer.
   */
  kDifKmacMaxOutputLenWords = (UINT32_MAX - 32) / 32,

  /**
   * The maximum key length supported by the KMAC operation.
   *
   * The length is in 32-bit words.
   */
  kDifKmacMaxKeyLenWords = 512 / 32,
};

/**
 * Key length.
 *
 * The key length is specified in bits.
 */
typedef enum dif_kmac_key_length {
  /** Software provided 128 bit key. */
  kDifKmacKeyLen128 = 0,
  /** Software provided 192 bit key. */
  kDifKmacKeyLen192 = 1,
  /** Software provided 256 bit key. */
  kDifKmacKeyLen256 = 2,
  /** Software provided 384 bit key. */
  kDifKmacKeyLen384 = 3,
  /** Software provided 512 bit key. */
  kDifKmacKeyLen512 = 4,
} dif_kmac_key_length_t;

/**
 * A key for KMAC operations.
 *
 * The key is provided in two parts, `share0` and `share1`. These are
 * combined using a bitwise XOR operation in the KMAC unit to produce the real
 * key.
 *
 * The key shares are encoded in little endian byte order. This is fixed and
 * cannot be changed (unlike the byte order used for the message and state).
 *
 * Unused words in the key shares must be set to 0.
 */
typedef struct dif_kmac_key {
  uint32_t share0[kDifKmacMaxKeyLenWords];
  uint32_t share1[kDifKmacMaxKeyLenWords];
  dif_kmac_key_length_t length;
} dif_kmac_key_t;

/**
 * An encoded bit string used for customization string (S).
 *
 * Use `dif_kmac_customization_string_init` to initialize.
 */
typedef struct dif_kmac_customization_string {
  /** Encoded S: left_encode(len(S)) || S */
  char buffer[kDifKmacMaxCustomizationStringLen +
              kDifKmacMaxCustomizationStringOverhead];
  /** Length of data in buffer in bytes. */
  uint32_t length;
} dif_kmac_customization_string_t;

/**
 * An encoded bit string used for function name (N).
 *
 * Use `dif_kmac_function_name_init` to initialize.
 */
typedef struct dif_kmac_function_name {
  /** Encoded N: left_encode(len(N)) || N */
  char buffer[kDifKmacMaxFunctionNameLen + kDifKmacMaxFunctionNameOverhead];
  /** Length of data in buffer in bytes. */
  uint32_t length;
} dif_kmac_function_name_t;

/**
 * Error reported by KMAC unit.
 *
 * Codes taken from hw/ip/kmac/rtl/kmac_pkg.sv:err_code_e
 */
typedef enum dif_kmac_error {
  /**
   * No error has occured.
   */
  kDifKmacErrorNone,

  /**
   * The Key Manager has raised an error because the secret key is not valid.
   */
  kDifKmacErrorKeyNotValid,

  /**
   * An attempt was made to write data into the message FIFO but the KMAC unit
   * was not in the correct state to receive the data.
   */
  kDifKmacErrorSoftwarePushedMessageFifo,

  /**
   * An invalid state transition was attempted (e.g. idle -> run without
   * intermediate process state).
   */
  kDifKmacErrorSoftwarePushedWrongCommand,

  /**
   * The entropy wait timer has expired.
   */
  kDifKmacErrorEntropyWaitTimerExpired,

  /**
   * Incorrect entropy mode when entropy is ready.
   */
  kDifKmacErrorEntropyModeIncorrect,

  /**
   * An error was encountered but the cause is unknown.
   */
  kDifKmacErrorUnknownError,
} dif_kmac_error_t;

/**
 * The state of the message FIFO used to buffer absorbed data.
 */
typedef enum dif_kmac_fifo_state {
  /** The message FIFO is empty. */
  kDifKmacFifoStateEmpty,
  /** The message FIFO is not empty or full. */
  kDifKmacFifoStatePartial,
  /** The message FIFO is full. Further writes will block. */
  kDifKmacFifoStateFull,
} dif_kmac_fifo_state_t;

/**
 * A snapshot of the enablement state of the interrupts for KMAC.
 *
 * This is an opaque type, to be used with the `dif_kmac_irq_disable_all()` and
 * `dif_kmac_irq_restore_all()` functions.
 */
typedef uint32_t dif_kmac_irq_snapshot_t;

/**
 * Creates a new handle for KMAC.
 *
 * This function does not actuate the hardware.
 *
 * @param params Hardware instantiation parameters.
 * @param[out] kmac Out param for the initialized handle.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_init(dif_kmac_params_t params, dif_kmac_t *kmac);

/**
 * Configures KMAC with runtime information.
 *
 * @param kmac A KMAC handle.
 * @param config Runtime configuration parameters.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT dif_kmac_result_t
dif_kmac_configure(dif_kmac_t *kmac, dif_kmac_config_t config);

/**
 * Encode a customization string (S).
 *
 * The length of the string must not exceed `kDifKmacMaxCustomizationStringLen`.
 *
 * Note that this function will encode `len` bytes from `data` regardless of
 * whether `data` is null-terminated or not.
 *
 * See NIST Special Publication 800-185 [2] for more information about the
 * customization string (S) parameter.
 *
 * @param data String to encode.
 * @param len Length of string to encode.
 * @param[out] out Encoded customization string.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_customization_string_init(
    const char *data, size_t len, dif_kmac_customization_string_t *out);

/**
 * Encode a function name (N).
 *
 * The length of the string must not exceed `kDifKmacMaxFunctionNameLen`.
 *
 * Note that this function will encode `len` bytes from `data` regardless of
 * whether `data` is null-terminated or not.
 *
 * See NIST Special Publication 800-185 [2] for more information about the
 * function name (N) parameter.
 *
 * @param data String to encode.
 * @param len Length of string to encode.
 * @param[out] out Encoded function name.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_function_name_init(const char *data, size_t len,
                                              dif_kmac_function_name_t *out);

/**
 * Start a SHA-3 operation.
 *
 * SHA-3 operations have a fixed output length.
 *
 * See NIST FIPS 202 [1] for more information about SHA-3.
 *
 * @param kmac A KMAC handle.
 * @param mode The SHA-3 mode of operation.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_mode_sha3_start(dif_kmac_t *kmac,
                                           dif_kmac_mode_sha3_t mode);

/**
 * Start a SHAKE operation.
 *
 * SHAKE operations have a variable (XOF) output length.
 *
 * See NIST FIPS 202 [1] for more information about SHAKE.
 *
 * @param kmac A KMAC handle.
 * @param mode The mode of operation.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_mode_shake_start(dif_kmac_t *kmac,
                                            dif_kmac_mode_shake_t mode);

/**
 * Start a cSHAKE operation.
 *
 * cSHAKE operations have a variable (XOF) output length.
 *
 * See NIST Special Publication 800-185 [2] for more information about cSHAKE.
 *
 * @param kmac A KMAC handle.
 * @param mode The mode of operation.
 * @param n Function name (optional).
 * @param s Customization string (optional).
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_mode_cshake_start(
    dif_kmac_t *kmac, dif_kmac_mode_cshake_t mode,
    const dif_kmac_function_name_t *n,
    const dif_kmac_customization_string_t *s);

/**
 * Start a KMAC operation.
 *
 * To use KMAC in eXtendable-Output Function (XOF) mode set the output length
 * (`l`) to 0. The output length must not be greater than
 * `kDifKmacMaxOutputLenWords`.
 *
 * The key provided must have at least as many bits as the security strength
 * of the `mode`.
 *
 * See NIST Special Publication 800-185 [2] for more information about KMAC.
 *
 * @param kmac A KMAC handle.
 * @param mode The mode of operation.
 * @param l Output length (number of 32-bit words that will be 'squeezed').
 * @param k Pointer to secret key.
 * @param s Customization string (optional).
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_mode_kmac_start(
    dif_kmac_t *kmac, dif_kmac_mode_kmac_t mode, size_t l,
    const dif_kmac_key_t *k, const dif_kmac_customization_string_t *s);

/**
 * Absorb bytes from the message provided.
 *
 * If `kDifKmacIncomplete` is returned then the message FIFO is full and the
 * message was only partially absorbed. The message pointer and length should be
 * updated according to the number of bytes processed and the absorb operation
 * continued at a later time.
 *
 * If `processed` is not provided then this function will block until the entire
 * message has been processed or an error occurs.
 *
 * @param kmac A KMAC handle.
 * @param msg Pointer to data to absorb.
 * @param len Number of bytes of data to absorb.
 * @param[out] processed Number of bytes processed (optional).
 * @preturn The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_absorb(dif_kmac_t *kmac, const void *msg, size_t len,
                                  size_t *processed);

/**
 * Squeeze bytes into the output buffer provided.
 *
 * Requesting a squeeze operation will prevent any further absorbtion operations
 * from taking place.
 *
 * If `kDifKmacIncomplete` is returned then the hardware is currently
 * recomputing the state and the output was only partially written. The output
 * pointer and length should be updated according to the number of bytes
 * processed and the squeeze operation continued at a later time.
 *
 * If `processed` is not provided then this function will block until `len`
 * bytes have been written to `out` or an error occurs.
 *
 * @param kmac A KMAC handle.
 * @param[out] out Pointer to output buffer.
 * @param[out] len Number of 32-bit words to write to output buffer.
 * @param[out] processed Number of 32-bit words written to output buffer
 * (optional).
 * @preturn The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_squeeze(dif_kmac_t *kmac, uint32_t *out, size_t len,
                                   size_t *processed);

/**
 * Ends a squeeze operation and resets the hardware so it is ready for a new
 * operation.
 *
 * @param kmac A KMAC handle.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_end(dif_kmac_t *kmac);

/**
 * Get the current error code.
 *
 * @param kmac A KMAC handle.
 * @param[out] error The current error code.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_get_error(const dif_kmac_t *kmac,
                                     dif_kmac_error_t *error);

/**
 * Clear the current error code and reset the state machine to the idle state
 * ready to accept new operations.
 *
 * The state of any in-progress operation will be lost and the operation will
 * need to be restarted.
 *
 * @param kmac A KMAC handle.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_reset(dif_kmac_t *kmac);

/**
 * Fetch the current status of the message FIFO used to buffer absorbed data.
 *
 * @param kmac A KMAC handle.
 * @param[out] state The state of the FIFO (empty, partially full or full).
 * @param[out] depth The current depth of the FIFO (optional).
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_get_fifo_state(const dif_kmac_t *kmac,
                                          dif_kmac_fifo_state_t *state,
                                          uint32_t *depth);

/**
 * Reports whether or not the KMAC configuration register is locked.
 *
 * If writes to the KMAC configuration register are disabled (locked) then it is
 * not possible to change any configuration parameters or start a new operation.
 * The configuration register is locked when an operation has been started and
 * is unlocked again when it completes.
 *
 * @param kmac A KMAC handle.
 * @param[out] is_locked Out-param reporting the lock state.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_config_is_locked(const dif_kmac_t *kmac,
                                            bool *is_locked);

/**
 * Returns whether a particular interrupt is currently pending.
 *
 * @param kmac A KMAC handle.
 * @param irq An interrupt type.
 * @param[out] is_pending Out-param for whether the interrupt is pending.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_irq_is_pending(const dif_kmac_t *kmac,
                                          dif_kmac_irq_t irq, bool *is_pending);

/**
 * Acknowledges a particular interrupt, indicating to the hardware that it has
 * been successfully serviced.
 *
 * @param kmac A KMAC handle.
 * @param irq An interrupt type.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_irq_acknowledge(const dif_kmac_t *kmac,
                                           dif_kmac_irq_t irq);

/**
 * Checks whether a particular interrupt is currently enabled or disabled.
 *
 * @param kmac A KMAC handle.
 * @param irq An interrupt type.
 * @param[out] state Out-param toggle state of the interrupt.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_irq_get_enabled(const dif_kmac_t *kmac,
                                           dif_kmac_irq_t irq,
                                           dif_kmac_toggle_t *state);

/**
 * Sets whether a particular interrupt is currently enabled or disabled.
 *
 * @param kmac A KMAC handle.
 * @param irq An interrupt type.
 * @param state The new toggle state for the interrupt.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_irq_set_enabled(const dif_kmac_t *kmac,
                                           dif_kmac_irq_t irq,
                                           dif_kmac_toggle_t state);

/**
 * Forces a particular interrupt, causing it to be serviced as if hardware had
 * asserted it.
 *
 * @param kmac A KMAC handle.
 * @param irq An interrupt type.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_irq_force(const dif_kmac_t *kmac,
                                     dif_kmac_irq_t irq);

/**
 * Disables all interrupts, optionally snapshotting all toggle state for later
 * restoration.
 *
 * @param kmac A KMAC handle.
 * @param[out] snapshot Out-param for the snapshot; may be `NULL`.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_irq_disable_all(const dif_kmac_t *kmac,
                                           dif_kmac_irq_snapshot_t *snapshot);

/**
 * Restores interrupts from the given snapshot.
 *
 * This function can be used with `dif_kmac_irq_disable_all()` to temporary
 * interrupt save-and-restore.
 *
 * @param kmac A KMAC handle.
 * @param snapshot A snapshot to restore from.
 * @return The result of the operation.
 */
DIF_WARN_UNUSED_RESULT
dif_kmac_result_t dif_kmac_irq_restore_all(
    const dif_kmac_t *kmac, const dif_kmac_irq_snapshot_t *snapshot);

#ifdef __cplusplus
}  // extern "C"
#endif  // __cplusplus

#endif  // OPENTITAN_SW_DEVICE_LIB_DIF_DIF_KMAC_H_