# Copyright lowRISC contributors.
# Licensed under the Apache License, Version 2.0, see LICENSE for details.
# SPDX-License-Identifier: Apache-2.0

CUR_DIR := $(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
PRJ_DIR := $(realpath ${CUR_DIR}/../)
export PRJ_DIR

REG_OUTPUT_DIR    ?= ${PRJ_DIR}/build/regs-generated
REG_OUTPUT_DV_DIR ?= ${REG_OUTPUT_DIR}/dv
REG_OUTPUT_SW_DIR ?= ${REG_OUTPUT_DIR}/sw

IPS ?= aes           \
       alert_handler \
       clkmgr        \
       entropy_src   \
       csrng         \
       edn           \
       flash_ctrl    \
       gpio          \
       hmac          \
       kmac          \
       i2c           \
       keymgr        \
       lc_ctrl       \
       nmi_gen       \
       otp_ctrl      \
       padctrl       \
       pinmux        \
       pwrmgr        \
       rstmgr        \
       rv_plic       \
       rv_timer      \
       sensor_ctrl   \
       spi_device    \
       sram_ctrl     \
       trial1        \
       otbn          \
       uart          \
       usbdev        \
       usbuart

TOPS ?= top_earlgrey

# conditional flags
VERBOSE ?= 0
toolflags ?=
ifeq ($(VERBOSE),1)
  toolflags      += -v
endif

dir_hjson = data

dynips_reg = $(addsuffix _reg, $(IPS))

ips_reg = $(addsuffix _reg, $(IPS))

ips_reg_header = $(addsuffix _reg_header, $(IPS))

tops_gen = $(addsuffix _gen,$(TOPS))

tops_reg = $(addsuffix _reg,$(TOPS))

all: $(dynips_reg) $(tops_gen) $(tops_reg) banner otp-mmap

banner:
	@echo "############################################"
	@echo "Note: Regs for DV & SW are now generated at:"
	@echo "${REG_OUTPUT_DIR}"
	@echo "############################################"

regs: $(dynips_reg) $(tops_reg) banner

pre_reg:
	mkdir -p ${REG_OUTPUT_DIR}
	mkdir -p ${REG_OUTPUT_DV_DIR}
	mkdir -p ${REG_OUTPUT_SW_DIR}

$(ips_reg): pre_reg
	if [ -f ${PRJ_DIR}/hw/ip/$(subst _reg,,$@)/$(dir_hjson)/$(subst _reg,,$@).hjson ]; then \
		${PRJ_DIR}/util/regtool.py ${toolflags} -r ${PRJ_DIR}/hw/ip/$(subst _reg,,$@)/$(dir_hjson)/$(subst _reg,,$@).hjson; \
		${PRJ_DIR}/util/regtool.py -s -t ${REG_OUTPUT_DV_DIR} \
		  ${PRJ_DIR}/hw/ip/$(subst _reg,,$@)/$(dir_hjson)/$(subst _reg,,$@).hjson; \
	fi

otp-mmap:
	cd ${PRJ_DIR} && ./util/design/gen-otp-mmap.py

regs-header: $(ips_reg_header) banner

$(ips_reg_header): pre_reg
	if [ -f ${PRJ_DIR}/hw/ip/$(subst _reg_header,,$@)/$(dir_hjson)/$(subst _reg_header,,$@).hjson ]; then \
		${PRJ_DIR}/util/regtool.py -D -o ${REG_OUTPUT_SW_DIR}/$(subst _reg_header,_reg_headers,$@).h\
		${PRJ_DIR}/hw/ip/$(subst _reg_header,,$@)/$(dir_hjson)/$(subst _reg_header,,$@).hjson; \
	fi

clean-regs-header:
	rm -r -f ${REG_OUTPUT_SW_DIR}

top: $(tops_gen) $(tops_reg)
$(tops_gen):
	$(eval $@_TOP := $(strip $(foreach top,$(TOPS),$(findstring $(top),$@))))
	${PRJ_DIR}/util/topgen.py -t ${PRJ_DIR}/hw/$($@_TOP)/data/$($@_TOP).hjson \
		--tpl ${PRJ_DIR}/hw/$($@_TOP)/data/ \
		-o ${PRJ_DIR}/hw/$($@_TOP)/ ${toolflags}

$(tops_reg): pre_reg
	$(eval $@_TOP := $(strip $(foreach top,$(TOPS),$(findstring $(top),$@))))
	mkdir -p ${REG_OUTPUT_DV_DIR}/$($@_TOP)
	${PRJ_DIR}/util/topgen.py -t ${PRJ_DIR}/hw/$($@_TOP)/data/$($@_TOP).hjson \
		-r -o ${REG_OUTPUT_DV_DIR}/$($@_TOP) ${toolflags}


.PHONY: all banner $(ips_reg) $(tops_gen) $(ips_reg_header)