// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0

#include "sw/device/lib/dif/dif_usbdev.h"

#include <assert.h>

#include "sw/device/lib/base/bitfield.h"

#include "usbdev_regs.h"  // Generated.

/**
 * Definition in the header file (and probably other places) must be updated if
 * there is a hardware change.
 */
static_assert(USBDEV_NUM_ENDPOINTS == USBDEV_PARAM_N_ENDPOINTS,
              "Mismatch in number of endpoints");

/**
 * Max packet size is equal to the size of device buffers.
 */
#define USBDEV_BUFFER_ENTRY_SIZE_BYTES USBDEV_MAX_PACKET_SIZE

/**
 * Constants used to indicate that a buffer pool is full or empty.
 */
#define BUFFER_POOL_FULL (USBDEV_NUM_BUFFERS - 1)
#define BUFFER_POOL_EMPTY -1

/**
 * Hardware information for endpoints.
 */
typedef struct endpoint_hw_info {
  uint32_t config_in_reg_offset;
  uint8_t bit_index;
} endpoint_hw_info_t;

/**
 * Helper macro to define an `endpoint_hw_info_t` entry for endpoint N.
 *
 * Note: This uses the bit indices of `USBDEV_IN_SENT` register for the sake
 * of conciseness because other endpoint registers use the same layout.
 */
#define ENDPOINT_HW_INFO_ENTRY(N)                                  \
  [N] = {.config_in_reg_offset = USBDEV_CONFIGIN_##N##_REG_OFFSET, \
         .bit_index = USBDEV_IN_SENT_SENT_##N##_BIT}

static const endpoint_hw_info_t kEndpointHwInfos[USBDEV_NUM_ENDPOINTS] = {
    ENDPOINT_HW_INFO_ENTRY(0),  ENDPOINT_HW_INFO_ENTRY(1),
    ENDPOINT_HW_INFO_ENTRY(2),  ENDPOINT_HW_INFO_ENTRY(3),
    ENDPOINT_HW_INFO_ENTRY(4),  ENDPOINT_HW_INFO_ENTRY(5),
    ENDPOINT_HW_INFO_ENTRY(6),  ENDPOINT_HW_INFO_ENTRY(7),
    ENDPOINT_HW_INFO_ENTRY(8),  ENDPOINT_HW_INFO_ENTRY(9),
    ENDPOINT_HW_INFO_ENTRY(10), ENDPOINT_HW_INFO_ENTRY(11),
};

#undef ENDPOINT_HW_INFO_ENTRY

/**
 * Static functions for the free buffer pool.
 */

/**
 * Checks if a buffer pool is full.
 *
 * A buffer pool is full if it contains `USBDEV_NUM_BUFFERS` buffers.
 *
 * @param pool A buffer pool.
 * @return `true` if the buffer pool if full, `false` otherwise.
 */
OT_WARN_UNUSED_RESULT
static bool buffer_pool_is_full(dif_usbdev_buffer_pool_t *pool) {
  return pool->top == BUFFER_POOL_FULL;
}

/**
 * Checks if a buffer pool is empty.
 *
 * @param pool A buffer pool.
 * @return `true` if the buffer pool is empty, `false` otherwise.
 */
OT_WARN_UNUSED_RESULT
static bool buffer_pool_is_empty(dif_usbdev_buffer_pool_t *pool) {
  return pool->top == BUFFER_POOL_EMPTY;
}

/**
 * Checks if a buffer id is valid.
 *
 * A buffer id is valid if it is less than `USBDEV_NUM_BUFFERS`.
 *
 * @param buffer_id A buffer id.
 * @return `true` if `buffer_id` is valid, `false` otherwise.
 */
OT_WARN_UNUSED_RESULT
static bool buffer_pool_is_valid_buffer_id(uint8_t buffer_id) {
  return buffer_id < USBDEV_NUM_BUFFERS;
}

/**
 * Adds a buffer to a buffer pool.
 *
 * @param pool A buffer pool.
 * @param buffer_id A buffer id.
 * @return `true` if the operation was successful, `false` otherwise.
 */
OT_WARN_UNUSED_RESULT
static bool buffer_pool_add(dif_usbdev_buffer_pool_t *pool, uint8_t buffer_id) {
  if (buffer_pool_is_full(pool) || !buffer_pool_is_valid_buffer_id(buffer_id)) {
    return false;
  }

  ++pool->top;
  pool->buffers[pool->top] = buffer_id;

  return true;
}

/**
 * Removes a buffer from a buffer pool.
 *
 * @param pool A buffer pool.
 * @param buffer_id A buffer id.
 * @return `true` if the operation was successful, `false` otherwise.
 */
OT_WARN_UNUSED_RESULT
static bool buffer_pool_remove(dif_usbdev_buffer_pool_t *pool,
                               uint8_t *buffer_id) {
  if (buffer_pool_is_empty(pool) || buffer_id == NULL) {
    return false;
  }

  *buffer_id = pool->buffers[pool->top];
  --pool->top;

  return true;
}

/**
 * Initializes the buffer pool.
 *
 * At the end of this operation, the buffer pool contains `USBDEV_NUM_BUFFERS`
 * buffers.
 *
 * @param pool A buffer pool.
 * @return `true` if the operation was successful, `false` otherwise.
 */
OT_WARN_UNUSED_RESULT
static bool buffer_pool_init(dif_usbdev_buffer_pool_t *pool) {
  // Start with an empty pool
  pool->top = -1;

  // Add all buffers
  for (uint8_t i = 0; i < USBDEV_NUM_BUFFERS; ++i) {
    if (!buffer_pool_add(pool, i)) {
      return false;
    }
  }

  return true;
}

/**
 * Utility functions
 */

/**
 * Checks if the given value is a valid `dif_toggle_t` variant.
 */
OT_WARN_UNUSED_RESULT
static bool is_valid_toggle(dif_toggle_t val) {
  return val == kDifToggleEnabled || val == kDifToggleDisabled;
}

/**
 * Checks if the given value is a valid `dif_usbdev_power_sense_override_t`
 * variant.
 */
OT_WARN_UNUSED_RESULT
static bool is_valid_power_sense_override(
    dif_usbdev_power_sense_override_t val) {
  return val == kDifUsbdevPowerSenseOverrideDisabled ||
         val == kDifUsbdevPowerSenseOverridePresent ||
         val == kDifUsbdevPowerSenseOverrideNotPresent;
}

/**
 * Checks if the given value is a valid endpoint number.
 */
OT_WARN_UNUSED_RESULT
static bool is_valid_endpoint(uint8_t endpoint) {
  return endpoint < USBDEV_NUM_ENDPOINTS;
}

/**
 * Enables/disables the functionality controlled by the register at `reg_offset`
 * for an endpoint.
 */
OT_WARN_UNUSED_RESULT
static dif_result_t endpoint_functionality_enable(const dif_usbdev_t *usbdev,
                                                  uint32_t reg_offset,
                                                  uint8_t endpoint,
                                                  dif_toggle_t new_state) {
  if (usbdev == NULL || !is_valid_endpoint(endpoint) ||
      !is_valid_toggle(new_state)) {
    return kDifBadArg;
  }

  if (kDifToggleEnabled) {
    mmio_region_nonatomic_set_bit32(usbdev->base_addr, reg_offset,
                                    kEndpointHwInfos[endpoint].bit_index);
  } else {
    mmio_region_nonatomic_clear_bit32(usbdev->base_addr, reg_offset,
                                      kEndpointHwInfos[endpoint].bit_index);
  }

  return kDifOk;
}

/**
 * Returns the address that corresponds to the given buffer and offset
 * into that buffer.
 */
OT_WARN_UNUSED_RESULT
static uint32_t get_buffer_addr(uint8_t buffer_id, size_t offset) {
  return USBDEV_BUFFER_REG_OFFSET +
         (buffer_id * USBDEV_BUFFER_ENTRY_SIZE_BYTES) + offset;
}

/**
 * USBDEV DIF library functions.
 */

dif_result_t dif_usbdev_init(mmio_region_t base_addr, dif_usbdev_t *usbdev) {
  if (usbdev == NULL) {
    return kDifBadArg;
  }

  usbdev->base_addr = base_addr;

  return kDifOk;
}

dif_result_t dif_usbdev_configure(const dif_usbdev_t *usbdev,
                                  dif_usbdev_buffer_pool_t *buffer_pool,
                                  dif_usbdev_config_t config) {
  if (usbdev == NULL || buffer_pool == NULL) {
    return kDifBadArg;
  }

  // Configure the free buffer pool.
  if (!buffer_pool_init(buffer_pool)) {
    return kDifError;
  }

  // Check enum fields.
  if (!is_valid_toggle(config.differential_rx) ||
      !is_valid_toggle(config.differential_tx) ||
      !is_valid_toggle(config.single_bit_eop) ||
      !is_valid_power_sense_override(config.power_sense_override) ||
      !is_valid_toggle(config.pin_flip) ||
      !is_valid_toggle(config.clock_sync_signals)) {
    return kDifBadArg;
  }

  // Determine the value of the PHY_CONFIG register.
  uint32_t phy_config_val = 0;

  if (config.differential_rx == kDifToggleEnabled) {
    phy_config_val = bitfield_field32_write(
        phy_config_val,
        (bitfield_field32_t){
            .mask = 1,
            .index = USBDEV_PHY_CONFIG_RX_DIFFERENTIAL_MODE_BIT,
        },
        1);
  }

  if (config.differential_tx == kDifToggleEnabled) {
    phy_config_val = bitfield_field32_write(
        phy_config_val,
        (bitfield_field32_t){
            .mask = 1,
            .index = USBDEV_PHY_CONFIG_TX_DIFFERENTIAL_MODE_BIT,
        },
        1);
  }

  if (config.single_bit_eop == kDifToggleEnabled) {
    phy_config_val = bitfield_field32_write(
        phy_config_val,
        (bitfield_field32_t){
            .mask = 1,
            .index = USBDEV_PHY_CONFIG_EOP_SINGLE_BIT_BIT,
        },
        1);
  }

  if (config.power_sense_override == kDifUsbdevPowerSenseOverridePresent) {
    phy_config_val = bitfield_field32_write(
        phy_config_val,
        (bitfield_field32_t){
            .mask = 1,
            .index = USBDEV_PHY_CONFIG_OVERRIDE_PWR_SENSE_EN_BIT,
        },
        1);
    phy_config_val = bitfield_field32_write(
        phy_config_val,
        (bitfield_field32_t){
            .mask = 1,
            .index = USBDEV_PHY_CONFIG_OVERRIDE_PWR_SENSE_VAL_BIT,
        },
        1);
  } else if (config.power_sense_override ==
             kDifUsbdevPowerSenseOverrideNotPresent) {
    phy_config_val = bitfield_field32_write(
        phy_config_val,
        (bitfield_field32_t){
            .mask = 1,
            .index = USBDEV_PHY_CONFIG_OVERRIDE_PWR_SENSE_EN_BIT,
        },
        1);
  }

  if (config.pin_flip == kDifToggleEnabled) {
    phy_config_val =
        bitfield_field32_write(phy_config_val,
                               (bitfield_field32_t){
                                   .mask = 1,
                                   .index = USBDEV_PHY_CONFIG_PINFLIP_BIT,
                               },
                               1);
  }

  if (config.clock_sync_signals == kDifToggleDisabled) {
    phy_config_val = bitfield_field32_write(
        phy_config_val,
        (bitfield_field32_t){
            .mask = 1,
            .index = USBDEV_PHY_CONFIG_USB_REF_DISABLE_BIT,
        },
        1);
  }

  // Write configuration to PHY_CONFIG register
  mmio_region_write32(usbdev->base_addr, USBDEV_PHY_CONFIG_REG_OFFSET,
                      phy_config_val);

  return kDifOk;
}

dif_result_t dif_usbdev_fill_available_fifo(
    const dif_usbdev_t *usbdev, dif_usbdev_buffer_pool_t *buffer_pool) {
  if (usbdev == NULL || buffer_pool == NULL) {
    return kDifBadArg;
  }

  // Remove buffers from the pool and write them to the AV FIFO until it is full
  while (!mmio_region_get_bit32(usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
                                USBDEV_USBSTAT_AV_FULL_BIT) &&
         !buffer_pool_is_empty(buffer_pool)) {
    uint8_t buffer_id;
    if (!buffer_pool_remove(buffer_pool, &buffer_id)) {
      return kDifError;
    }
    mmio_region_write_only_set_field32(usbdev->base_addr,
                                       USBDEV_AVBUFFER_REG_OFFSET,
                                       USBDEV_AVBUFFER_BUFFER_FIELD, buffer_id);
  }

  return kDifOk;
}

dif_result_t dif_usbdev_endpoint_setup_enable(const dif_usbdev_t *usbdev,
                                              uint8_t endpoint,
                                              dif_toggle_t new_state) {
  return endpoint_functionality_enable(usbdev, USBDEV_RXENABLE_SETUP_REG_OFFSET,
                                       endpoint, new_state);
}

dif_result_t dif_usbdev_endpoint_out_enable(const dif_usbdev_t *usbdev,
                                            uint8_t endpoint,
                                            dif_toggle_t new_state) {
  return endpoint_functionality_enable(usbdev, USBDEV_RXENABLE_OUT_REG_OFFSET,
                                       endpoint, new_state);
}

dif_result_t dif_usbdev_endpoint_stall_enable(const dif_usbdev_t *usbdev,
                                              uint8_t endpoint,
                                              dif_toggle_t new_state) {
  return endpoint_functionality_enable(usbdev, USBDEV_STALL_REG_OFFSET,
                                       endpoint, new_state);
}

dif_result_t dif_usbdev_endpoint_stall_get(const dif_usbdev_t *usbdev,
                                           uint8_t endpoint, bool *state) {
  if (usbdev == NULL || state == NULL || !is_valid_endpoint(endpoint)) {
    return kDifBadArg;
  }

  *state = mmio_region_get_bit32(usbdev->base_addr, USBDEV_STALL_REG_OFFSET,
                                 kEndpointHwInfos[endpoint].bit_index);

  return kDifOk;
}

dif_result_t dif_usbdev_endpoint_iso_enable(const dif_usbdev_t *usbdev,
                                            uint8_t endpoint,
                                            dif_toggle_t new_state) {
  return endpoint_functionality_enable(usbdev, USBDEV_ISO_REG_OFFSET, endpoint,
                                       new_state);
}

dif_result_t dif_usbdev_interface_enable(const dif_usbdev_t *usbdev,
                                         dif_toggle_t new_state) {
  if (usbdev == NULL || !is_valid_toggle(new_state)) {
    return kDifBadArg;
  }

  if (new_state == kDifToggleEnabled) {
    mmio_region_nonatomic_set_bit32(usbdev->base_addr,
                                    USBDEV_USBCTRL_REG_OFFSET,
                                    USBDEV_USBCTRL_ENABLE_BIT);
  } else {
    mmio_region_nonatomic_clear_bit32(usbdev->base_addr,
                                      USBDEV_USBCTRL_REG_OFFSET,
                                      USBDEV_USBCTRL_ENABLE_BIT);
  }

  return kDifOk;
}

dif_result_t dif_usbdev_recv(const dif_usbdev_t *usbdev,
                             dif_usbdev_rx_packet_info_t *info,
                             dif_usbdev_buffer_t *buffer) {
  if (usbdev == NULL || info == NULL || buffer == NULL) {
    return kDifBadArg;
  }

  // Check if the RX FIFO is empty
  if (mmio_region_get_bit32(usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
                            USBDEV_USBSTAT_RX_EMPTY_BIT)) {
    return kDifError;
  }

  // Read fifo entry
  const uint32_t fifo_entry =
      mmio_region_read32(usbdev->base_addr, USBDEV_RXFIFO_REG_OFFSET);
  // Init packet info
  *info = (dif_usbdev_rx_packet_info_t){
      .endpoint = bitfield_field32_read(fifo_entry, USBDEV_RXFIFO_EP_FIELD),
      .is_setup = bitfield_bit32_read(fifo_entry, USBDEV_RXFIFO_SETUP_BIT),
      .length = bitfield_field32_read(fifo_entry, USBDEV_RXFIFO_SIZE_FIELD),
  };
  // Init buffer struct
  *buffer = (dif_usbdev_buffer_t){
      .id = bitfield_field32_read(fifo_entry, USBDEV_RXFIFO_BUFFER_FIELD),
      .offset = 0,
      .remaining_bytes = info->length,
      .type = kDifUsbdevBufferTypeRead,
  };

  return kDifOk;
}

dif_result_t dif_usbdev_buffer_request(const dif_usbdev_t *usbdev,
                                       dif_usbdev_buffer_pool_t *buffer_pool,
                                       dif_usbdev_buffer_t *buffer) {
  if (usbdev == NULL || buffer_pool == NULL || buffer == NULL) {
    return kDifBadArg;
  }

  if (buffer_pool_is_empty(buffer_pool)) {
    return kDifUnavailable;
  }

  uint8_t buffer_id;
  if (!buffer_pool_remove(buffer_pool, &buffer_id)) {
    return kDifError;
  }

  *buffer = (dif_usbdev_buffer_t){
      .id = buffer_id,
      .offset = 0,
      .remaining_bytes = USBDEV_BUFFER_ENTRY_SIZE_BYTES,
      .type = kDifUsbdevBufferTypeWrite,
  };

  return kDifOk;
}

dif_result_t dif_usbdev_buffer_return(const dif_usbdev_t *usbdev,
                                      dif_usbdev_buffer_pool_t *buffer_pool,
                                      dif_usbdev_buffer_t *buffer) {
  if (usbdev == NULL || buffer_pool == NULL || buffer == NULL) {
    return kDifBadArg;
  }

  switch (buffer->type) {
    case kDifUsbdevBufferTypeRead:
    case kDifUsbdevBufferTypeWrite:
      // Return the buffer to the free buffer pool
      if (!buffer_pool_add(buffer_pool, buffer->id)) {
        return kDifError;
      }
      // Mark the buffer as stale
      buffer->type = kDifUsbdevBufferTypeStale;
      return kDifOk;
    default:
      return kDifBadArg;
  }
}

dif_result_t dif_usbdev_buffer_read(const dif_usbdev_t *usbdev,
                                    dif_usbdev_buffer_pool_t *buffer_pool,
                                    dif_usbdev_buffer_t *buffer, uint8_t *dst,
                                    size_t dst_len, size_t *bytes_written) {
  if (usbdev == NULL || buffer_pool == NULL || buffer == NULL ||
      buffer->type != kDifUsbdevBufferTypeRead || dst == NULL) {
    return kDifBadArg;
  }

  // bytes_to_copy is the minimum of remaining_bytes and dst_len
  size_t bytes_to_copy = buffer->remaining_bytes;
  if (bytes_to_copy > dst_len) {
    bytes_to_copy = dst_len;
  }
  // Copy from buffer to dst
  const uint32_t buffer_addr = get_buffer_addr(buffer->id, buffer->offset);
  mmio_region_memcpy_from_mmio32(usbdev->base_addr, buffer_addr, dst,
                                 bytes_to_copy);
  // Update buffer state
  buffer->offset += bytes_to_copy;
  buffer->remaining_bytes -= bytes_to_copy;

  if (bytes_written != NULL) {
    *bytes_written = bytes_to_copy;
  }

  // Check if there are any remaining bytes
  if (buffer->remaining_bytes > 0) {
    return kDifOk;
  }

  // Return the buffer to the free buffer pool
  if (!buffer_pool_add(buffer_pool, buffer->id)) {
    return kDifError;
  }

  // Mark the buffer as stale
  buffer->type = kDifUsbdevBufferTypeStale;
  return kDifOk;
}

dif_result_t dif_usbdev_buffer_write(const dif_usbdev_t *usbdev,
                                     dif_usbdev_buffer_t *buffer, uint8_t *src,
                                     size_t src_len, size_t *bytes_written) {
  if (usbdev == NULL || buffer == NULL ||
      buffer->type != kDifUsbdevBufferTypeWrite || src == NULL) {
    return kDifBadArg;
  }

  // bytes_to_copy is the minimum of remaining_bytes and src_len.
  size_t bytes_to_copy = buffer->remaining_bytes;
  if (bytes_to_copy > src_len) {
    bytes_to_copy = src_len;
  }

  // Write bytes to the buffer
  uint32_t buffer_addr = get_buffer_addr(buffer->id, buffer->offset);
  mmio_region_memcpy_to_mmio32(usbdev->base_addr, buffer_addr, src,
                               bytes_to_copy);

  buffer->offset += bytes_to_copy;
  buffer->remaining_bytes -= bytes_to_copy;

  if (bytes_written) {
    *bytes_written = bytes_to_copy;
  }

  if (buffer->remaining_bytes == 0 && bytes_to_copy < src_len) {
    return kDifError;
  }

  return kDifOk;
}

dif_result_t dif_usbdev_send(const dif_usbdev_t *usbdev, uint8_t endpoint,
                             dif_usbdev_buffer_t *buffer) {
  if (usbdev == NULL || !is_valid_endpoint(endpoint) || buffer == NULL ||
      buffer->type != kDifUsbdevBufferTypeWrite) {
    return kDifBadArg;
  }

  // Get the configin register offset of the endpoint.
  const uint32_t config_in_reg_offset =
      kEndpointHwInfos[endpoint].config_in_reg_offset;

  // Configure USBDEV_CONFIGINX register.
  // Note: Using mask and offset values for the USBDEV_CONFIGIN0 register
  // for all endpoints because all USBDEV_CONFIGINX registers have the same
  // layout.
  uint32_t config_in_val =
      mmio_region_read32(usbdev->base_addr, config_in_reg_offset);
  config_in_val = bitfield_field32_write(
      config_in_val, USBDEV_CONFIGIN_0_BUFFER_0_FIELD, buffer->id);
  config_in_val = bitfield_field32_write(
      config_in_val, USBDEV_CONFIGIN_0_SIZE_0_FIELD, buffer->offset);
  mmio_region_write32(usbdev->base_addr, config_in_reg_offset, config_in_val);

  // Mark the packet as ready for transmission
  mmio_region_nonatomic_set_bit32(usbdev->base_addr, config_in_reg_offset,
                                  USBDEV_CONFIGIN_0_RDY_0_BIT);

  // Mark the buffer as stale. It will be returned to the free buffer pool
  // in dif_usbdev_get_tx_status once transmission is complete.
  buffer->type = kDifUsbdevBufferTypeStale;

  return kDifOk;
}

dif_result_t dif_usbdev_get_tx_status(const dif_usbdev_t *usbdev,
                                      dif_usbdev_buffer_pool_t *buffer_pool,
                                      uint8_t endpoint,
                                      dif_usbdev_tx_status_t *status) {
  if (usbdev == NULL || buffer_pool == NULL || status == NULL ||
      !is_valid_endpoint(endpoint)) {
    return kDifBadArg;
  }

  // Get the configin register offset and bit index of the endpoint
  uint32_t config_in_reg_offset =
      kEndpointHwInfos[endpoint].config_in_reg_offset;
  uint8_t endpoint_bit_index = kEndpointHwInfos[endpoint].bit_index;

  // Read the configin register
  uint32_t config_in_val =
      mmio_region_read32(usbdev->base_addr, config_in_reg_offset);

  // Buffer used by this endpoint
  uint8_t buffer =
      bitfield_field32_read(config_in_val, USBDEV_CONFIGIN_0_BUFFER_0_FIELD);

  // Check the status of the packet
  if (bitfield_field32_read(config_in_val,
                            (bitfield_field32_t){
                                .mask = 1,
                                .index = USBDEV_CONFIGIN_0_RDY_0_BIT,
                            })) {
    // Packet is marked as ready to be sent and pending transmission
    *status = kDifUsbdevTxStatusPending;
  } else if (mmio_region_get_bit32(usbdev->base_addr, USBDEV_IN_SENT_REG_OFFSET,
                                   endpoint_bit_index)) {
    // Packet was sent successfully
    // Clear IN_SENT bit (rw1c)
    mmio_region_write_only_set_bit32(
        usbdev->base_addr, USBDEV_IN_SENT_REG_OFFSET, endpoint_bit_index);
    // Return the buffer back to the free buffer pool
    if (!buffer_pool_add(buffer_pool, buffer)) {
      return kDifError;
    }
    *status = kDifUsbdevTxStatusSent;
  } else if (bitfield_field32_read(config_in_val,
                                   (bitfield_field32_t){
                                       .mask = 1,
                                       .index = USBDEV_CONFIGIN_0_PEND_0_BIT,
                                   })) {
    // Canceled due to an IN SETUP packet or link reset
    // Clear pending bit (rw1c)
    mmio_region_write_only_set_bit32(usbdev->base_addr, config_in_reg_offset,
                                     USBDEV_CONFIGIN_0_PEND_0_BIT);
    // Return the buffer back to the free buffer pool
    if (!buffer_pool_add(buffer_pool, buffer)) {
      return kDifError;
    }
    *status = kDifUsbdevTxStatusCancelled;
  } else {
    // No packet has been queued for this endpoint
    *status = kDifUsbdevTxStatusNoPacket;
  }

  return kDifOk;
}

dif_result_t dif_usbdev_address_set(const dif_usbdev_t *usbdev, uint8_t addr) {
  if (usbdev == NULL) {
    return kDifBadArg;
  }

  mmio_region_nonatomic_set_field32(usbdev->base_addr,
                                    USBDEV_USBCTRL_REG_OFFSET,
                                    USBDEV_USBCTRL_DEVICE_ADDRESS_FIELD, addr);

  return kDifOk;
}

dif_result_t dif_usbdev_address_get(const dif_usbdev_t *usbdev, uint8_t *addr) {
  if (usbdev == NULL || addr == NULL) {
    return kDifBadArg;
  }

  // Note: Size of address is 7 bits.
  *addr = mmio_region_read_mask32(usbdev->base_addr, USBDEV_USBCTRL_REG_OFFSET,
                                  USBDEV_USBCTRL_DEVICE_ADDRESS_MASK,
                                  USBDEV_USBCTRL_DEVICE_ADDRESS_OFFSET);

  return kDifOk;
}

dif_result_t dif_usbdev_status_get_frame(const dif_usbdev_t *usbdev,
                                         uint16_t *frame_index) {
  if (usbdev == NULL || frame_index == NULL) {
    return kDifBadArg;
  }

  // Note: size of frame index is 11 bits.
  *frame_index = mmio_region_read_mask32(
      usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET, USBDEV_USBSTAT_FRAME_MASK,
      USBDEV_USBSTAT_FRAME_OFFSET);

  return kDifOk;
}

dif_result_t dif_usbdev_status_get_host_lost(const dif_usbdev_t *usbdev,
                                             bool *host_lost) {
  if (usbdev == NULL || host_lost == NULL) {
    return kDifBadArg;
  }

  *host_lost =
      mmio_region_get_bit32(usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
                            USBDEV_USBSTAT_HOST_LOST_BIT);

  return kDifOk;
}

dif_result_t dif_usbdev_status_get_link_state(
    const dif_usbdev_t *usbdev, dif_usbdev_link_state_t *link_state) {
  if (usbdev == NULL || link_state == NULL) {
    return kDifBadArg;
  }

  uint32_t val = mmio_region_read_mask32(
      usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
      USBDEV_USBSTAT_LINK_STATE_MASK, USBDEV_USBSTAT_LINK_STATE_OFFSET);

  switch (val) {
    case USBDEV_USBSTAT_LINK_STATE_VALUE_DISCONNECT:
      *link_state = kDifUsbdevLinkStateDisconnected;
      break;
    case USBDEV_USBSTAT_LINK_STATE_VALUE_POWERED:
      *link_state = kDifUsbdevLinkStatePowered;
      break;
    case USBDEV_USBSTAT_LINK_STATE_VALUE_POWERED_SUSPEND:
      *link_state = kDifUsbdevLinkStatePoweredSuspend;
      break;
    case USBDEV_USBSTAT_LINK_STATE_VALUE_ACTIVE:
      *link_state = kDifUsbdevLinkStateActive;
      break;
    case USBDEV_USBSTAT_LINK_STATE_VALUE_SUSPEND:
      *link_state = kDifUsbdevLinkStateSuspend;
      break;
    default:
      return kDifError;
  }

  return kDifOk;
}

dif_result_t dif_usbdev_status_get_sense(const dif_usbdev_t *usbdev,
                                         bool *sense) {
  if (usbdev == NULL || sense == NULL) {
    return kDifBadArg;
  }

  *sense = mmio_region_get_bit32(usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
                                 USBDEV_USBSTAT_SENSE_BIT);

  return kDifOk;
}

dif_result_t dif_usbdev_status_get_available_fifo_depth(
    const dif_usbdev_t *usbdev, uint8_t *depth) {
  if (usbdev == NULL || depth == NULL) {
    return kDifBadArg;
  }

  // Note: Size of available FIFO depth is 3 bits.
  *depth = mmio_region_read_mask32(usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
                                   USBDEV_USBSTAT_AV_DEPTH_MASK,
                                   USBDEV_USBSTAT_AV_DEPTH_OFFSET);

  return kDifOk;
}

dif_result_t dif_usbdev_status_get_available_fifo_full(
    const dif_usbdev_t *usbdev, bool *is_full) {
  if (usbdev == NULL || is_full == NULL) {
    return kDifBadArg;
  }

  *is_full = mmio_region_get_bit32(usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
                                   USBDEV_USBSTAT_AV_FULL_BIT);

  return kDifOk;
}

dif_result_t dif_usbdev_status_get_rx_fifo_depth(const dif_usbdev_t *usbdev,
                                                 uint8_t *depth) {
  if (usbdev == NULL || depth == NULL) {
    return kDifBadArg;
  }

  // Note: Size of RX FIFO depth is 3 bits.
  *depth = mmio_region_read_mask32(usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
                                   USBDEV_USBSTAT_RX_DEPTH_MASK,
                                   USBDEV_USBSTAT_RX_DEPTH_OFFSET);

  return kDifOk;
}

dif_result_t dif_usbdev_status_get_rx_fifo_empty(const dif_usbdev_t *usbdev,
                                                 bool *is_full) {
  if (usbdev == NULL || is_full == NULL) {
    return kDifBadArg;
  }

  *is_full = mmio_region_get_bit32(usbdev->base_addr, USBDEV_USBSTAT_REG_OFFSET,
                                   USBDEV_USBSTAT_RX_EMPTY_BIT);

  return kDifOk;
}