// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{ name: "hmac",
  clock_primary: "clk_i",
  bus_device: "tlul",
  bus_host: "none",
  interrupt_list: [
    { name: "hmac_done",
      desc: "HMAC-256 completes a message with key"
    }
    { name: "fifo_empty",
      desc: "Message FIFO empty condition"
    }
    { name: "hmac_err",
      desc: "HMAC error occurred. ERR_CODE register shows which error occurred"
    }
  ],
  inter_signal_list: [
    { name:    "idle",
      type:    "uni",
      act:     "req",
      package: "",
      struct:  "logic",
      width:   "1"
    }
  ],
  param_list: [
    { name:    "NumWords",
      type:    "int",
      default: "8",
      desc:    "Number of words for digest/ key",
      local:   "true"
    }
  ],
  regwidth: "32",
  registers: [
    { name: "CFG",
      desc: '''HMAC Configuration register.

            The register is updated when the engine is in Idle.
            If the software updates the register while the engine computes the hash,
            the updated value is discarded.
            ''',
      hwext:    "true",
      hwqe:     "true",
      swaccess: "rw",
      hwaccess: "hrw",
      fields: [
        { bits: "0",
          name: "hmac_en",
          desc: '''HMAC datapath enable.

                If this bit is 1, HMAC operates when `hash_start` toggles.
                ''',
          tags: [// don't enable hmac and sha data paths - we will do that in functional tests
                 "excl:CsrNonInitTests:CsrExclWrite"]
        }
        { bits: "1",
          name: "sha_en",
          desc: '''SHA256 enable. If 0, SHA engine won't initiate compression,
                this is used to stop operation of the SHA engine until configuration
                has been done. When the SHA engine is disabled the digest is cleared.'''
          tags: [// don't enable hmac and sha data paths - we will do that in functional tests
                 "excl:CsrNonInitTests:CsrExclWrite"]
        }
        { bits: "2",
          name: "endian_swap",
          desc: "Convert TL-UL wdata[31:0] to big-endian style {w[7:0], w[15:8], .. }",
          resval: "1",
        }
        { bits: "3",
          name: "digest_swap",
          desc: "DIGEST register byte-order. If 1, it swaps each DIGEST registers' byte-order.",
          resval: "0",
        }
      ]
    }
    { name: "CMD",
      desc: "HMAC command register",
      swaccess: "r0w1c",
      hwaccess: "hro",
      hwext: "true",
      hwqe:  "true",
      tags: [// design assertion : after hash_start sets, can only wr msg or set hash_process
             // design assertion : hash_process can be set only after hash_start is set
             "excl:CsrAllTests:CsrExclWrite"]
      fields: [
        { bits: "0",
          name: "hash_start",
          desc: '''If writes 1 into this field, SHA256 or HMAC begins its operation.

                CPU should configure relative information first, such as message_length,
                secret_key.
                ''',
        }
        { bits: "1",
          name: "hash_process",
          desc: '''If writes 1 into this field, SHA256 or HMAC calculates the digest or signing
                based on currently received message.
                '''
        }
      ],
    }
    { name: "STATUS",
      desc: "HMAC Status register",
      swaccess: "ro",
      hwaccess: "hwo",
      hwext: "true",
      fields: [
        { bits: "0",
          name: "fifo_empty",
          desc: "FIFO empty",
          resval: "1"
        }
        { bits: "1",
          name: "fifo_full",
          desc: "FIFO full. Data written to the FIFO whilst it is full will cause back-pressure on the interconnect"
        }
        { bits: "8:4",
          name: "fifo_depth",
          desc: "FIFO entry count."
        }
      ]
    }
    { name: "ERR_CODE",
      desc: "HMAC Error Code",
      swaccess: "ro",
      hwaccess: "hwo",
      fields: [
        { bits: "31:0",
          name: "err_code",
          desc: '''If error interrupt occurs, this register has information of error cause.
                Please take a look at `hw/ip/hmac/rtl/hmac_pkg.sv:err_code_e enum type.
                '''
          tags: [// Randomly write mem will cause this reg updated by design
                 "excl:CsrNonInitTests:CsrExclCheck"]
        }
      ]
    }
    { name: "WIPE_SECRET",
      desc: '''Randomize internal secret registers.

            If CPU writes value into the register, the value is used to randomize internal
            variables such as secret key, internal state machine, or hash value.
            ''',
      swaccess: "wo",
      hwaccess: "hro",
      hwext: "true",
      hwqe: "true",
      fields: [
        { bits: "31:0", name:"secret", desc: "Secret value" }
      ]
    }
    { multireg: {
        name: "KEY",
        desc: '''HMAC Secret Key

              SHA256 assumes secret key is hashed 256bit key.
              Order of the secret key is:
              key[255:0] = {KEY0, KEY1, KEY2, ... , KEY7};

              The registers are allowed to be updated when the engine is in Idle state.
              If the engine computes the hash, it discards any attempts to update the secret keys
              and report an error.
              ''',
        count: "NumWords",
        cname: "HMAC",
        hwext: "true",
        hwqe : "true",
        swaccess: "wo",
        hwaccess: "hrw",
        fields: [
          { bits: "31:0", name: "key", desc: "32-bit chunk of 256-bit Secret Key" }
        ],
      }
    }
    { multireg: {
        name: "DIGEST",
        desc: '''Digest output. If HMAC is disabled, the register shows result of SHA256

               Order of the digest is:
               digest[255:0] = {DIGEST0, DIGEST1, DIGEST2, ... , DIGEST7};
               ''',
        count: "NumWords",
        cname: "HMAC",
        swaccess: "ro",
        hwaccess: "hwo",
        hwext: "true",
        fields: [
          { bits: "31:0", name: "digest", desc: "32-bit chunk of 256-bit Digest" }
        ]
      }
    }
    { name: "MSG_LENGTH_LOWER",
      desc: '''Received Message Length calculated by the HMAC in bits [31:0]

            Message is byte granularity.
            lower 3bits [2:0] are ignored.''',
      swaccess: "ro",
      hwaccess: "hwo",
      fields: [
        { bits: "31:0", name: "v", desc: "Message Length [31:0]" }
      ]
    }
    { name: "MSG_LENGTH_UPPER",
      desc: "Received Message Length calculated by the HMAC in bits [63:32]",
      swaccess: "ro",
      hwaccess: "hwo",
      fields: [
        { bits: "31:0", name: "v", desc: "Message Length [63:32]" }
      ]
    }
    { skipto: "0x800" }
    { window: {
        name: "MSG_FIFO"
        items: "512"      // 2kB
        swaccess: "wo",
        byte-write: "true",
        desc: '''Message FIFO. Any write to this window will be appended to the FIFO. Only the lower [1:0] bits of the address matter to writes within the window (for correctly dealing with non 32-bit writes)
              '''
      }
    }
  ],
}