// Copyright lowRISC contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
// SPDX-License-Identifier: Apache-2.0
{
  name: "pattgen"
  import_testplans: ["hw/dv/tools/dvsim/testplans/csr_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/alert_test_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/intr_test_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/stress_all_with_reset_testplan.hjson",
                     "hw/dv/tools/dvsim/testplans/tl_device_access_types_testplan.hjson"],
  testpoints: [
    {
      name: smoke
      desc: '''
            Smoke test for pattgen ip in which dut is randomly programmed
            to generate random patterns on output channels.

            Stimulus:
              - Program the configuration registers of the output channels
              - Randomly activate the output channels
              - Re-program the configuration registers of the output channels once
                completion interrupts are asserted

            Checking:
              - Check divided clock rate for the active channels
                matching with the values of pre-divider registers
              - Check generated pattern matching on the active channels
                matching with the values of pattern data registers
              - Check completion interrupts are asserted once a pattern
                is completely generated on the active channels
            '''
      milestone: V1
      tests: ["pattgen_smoke"]
    }
    {
      name: perf
      desc: '''
            Checking ip operation at min/max bandwidth

            Stimulus:
              - Program the pre-divider registers to high/low values (slow/fast data rate)
              - Program the pattern data registers, the pattern length per output, and
                repeat counter registers to high/low values
              - Start and stop channels quickly
              - Clear interrupts quickly
            Checking:
              - Ensure patterns are correctly generated
              - Ensure interrupts are robust asserted and cleared (e.g. at the high data rate)
            '''
      milestone: V2
      tests: ["pattgen_perf"]
    }
    {
      name: cnt_rollover
      desc: '''
            Checking ip operation with random counter values

            Stimulus:
              - Program the pre-divider and size registers to unconstraint random values
              - Program the clk_cnt, bit_cnt and rep_cnt to values less than but close to
                predivider and size registers, so that counting would take a reasonable
                number of clock cycles
              - include programming for corner cases
                repeat programming a random number of times
              - Start and stop channels quickly
              - Clear interrupts quickly

            Checking:
              - Include functional cover point that rollover value is reached and counter is reset:
              - Ensure patterns are correctly generated
              - Ensure interrupts are robust asserted and cleared (e.g. at the high data rate)
            '''
      milestone: V2
      tests: ["cnt_rollover"]
    }
    {
      name: alert
      desc: '''
            Checking alert errors

            Stimulus:
            TODO: identify exactly what alerts are triggered, and for the V2
            find out exactly what triggers alert, if anything
            Checking:
              - Check alert `fatal_fault_err` is triggered
              and err_code is `INVALID_CMD`
              - Check alert `recov_operation_err` is triggered
              and err_code is `INVALID_DATA`
              - Check that operations are not recoverable
              after `fatal_fault_err` alert
            '''
      milestone: V2
      tests: ["pattgen_alert"]
    }
    {
      name: error
      desc: '''
            Reset then re-start the output channel on the fly.

            Stimulus:
              - Programm the configuration registers of the output channels
              - Randomly reset the in progress output channels
              - Re-program the configuration registers of the output channels

            Checking:
              - Ensure patterns are dropped when reset
              - Ensure the output channels get back normal after reset
            '''
      milestone: V2
      tests: ["pattgen_error"]
    }
    {
      name: stress_all
      desc: '''
            Combine above sequences in one test then randomly select for running.

            Stimulus:
              - Start sequences and randomly add reset between each sequence

            Checking:
              - All sequences should be finished and checked by the scoreboard
      '''
      milestone: V2
      tests: ["pattgen_stress_all"]
    }
  ]


  covergroups: [
    {
      name: pattgen_op_cg
      desc: '''
            The following coverage strategy is implemented:
            * The counters are covered at the max
              and min corner cases and for the middle values
            * Data bus has functional coverage using walking ones and zeroes
            * One bit width variables are wrapped in one cover point
              while counters and data have designated cover points
            * Channel enable signal is stand alone cover point
            * Chennel enable signal is crossed with all other cover points
            * When both channels are active, the enable signals of each
              channel are each crossed with cover points of both channels
            '''
    }
    {
      name: roll_cg
      desc: '''
            Covers that all valid enable and polarity settings
            for the Pattgen control register have been tested.
            Individual enable and polarity settings that will be covered include:
            - Enable pattern generator functionality for Channel 0 (ENABLE_CH0)
            - Enable pattern generator functionality for Channel 1 (ENABLE_CH1)
            - Clock (pcl) polarity for Channel 0 (POLARITY_CH0)
            - Clock (pcl) polarity for Channel 1 (POLARITY_CH1)
            All valid combinations of the above will also be crossed.
            '''
    }
    {
      name: ctrl_cg
      desc: '''
            Covers that all valid enable and polarity settings
            for the Pattgen control register have been tested.
            Individual enable and polarity settings that will be covered include:
            - Enable pattern generator functionality for Channel 0 (ENABLE_CH0)
            - Enable pattern generator functionality for Channel 1 (ENABLE_CH1)
            - Clock (pcl) polarity for Channel 0 (POLARITY_CH0)
            - Clock (pcl) polarity for Channel 1 (POLARITY_CH1)
            All valid combinations of the above will also be crossed.
            '''
    }
    {
      name: alert_cg
      desc: '''
            Covers fatal fault error alert when forcing command error
            and recover operation error alert when forcing data error.
            Individual alert settings and signals that will be covered include:
            - fatal fault error alert
            - recoverable operation error alert
            '''
    }
    {
      name: event_inter_cg
      desc: '''
            Covers that all valid settings of Interrupt Enable Register
            and Interrupt State Register register have been tested.
            Individual interrupt settings that will be covered include:
            - Interrupt Enable Register[0] (done_ch0)
            - Interrupt Enable Register[1] (done_ch1)
            - Interrupt State Register[0] (done_ch0)
            - Interrupt State Register[1] (done_ch1)
            Combinations of Interrupt Enable and Interrupt State
            registers for each channel will be crossed
            '''
    }
    {
      name: pattern_len_ch0_cg
      desc: '''
            Covers various Lengths of the channel0 seed pattern ranges,
            to ensure that Pattgen can operate successfully
            on different pattern lengths.
            we will cover that an acceptable distribution of lengths has been seen,
            and specifically cover some corner cases.
            '''
    }
    {
      name: pattern_len_ch1_cg
      desc: '''
            Similar to channel 0.
            '''
    }
    {
      name: pattern_reps_ch0_cg
      desc: '''
            Covers various numbers of channel repetitions of the channel0, to ensure that Pattgen
            can operate successfully on different pattern lengths.
            we will cover that an acceptable distribution of lengths has been seen,
            and specifically cover all corner cases.
            '''
    }
    {
      name: pattern_reps_ch1_cg
      desc: '''
            Similar to channel 0.
            '''
    }
    {
      name: pattern_prediv_ch0_cg
      desc: '''
            Covers various numbers of clock divide ratios of the channel0, to ensure that Pattgen
            can operate successfully on different clock divide ratios.
            we will cover that an acceptable distribution of lengths has been seen,
            and specifically cover corner cases.
            '''
    }
    {
      name: pattern_prediv_ch1_cg
      desc: '''
            Similar to channel 0.
            '''
    }
    {
      name: pattern_data_ch0_0_cg
      desc: '''
            Covers various data_0 values of the channel0 seed pattern ranges,
            to ensure that Pattgen can operate successfully on different pattern lengths.
            we will cover that an acceptable distribution of lengths has been seen,
            and specifically cover corner cases.
            '''
    }
    {
      name: pattern_data_ch0_1_cg
      desc: '''
            Similar to pattern_data_ch0_0_cg, except using data_1 values
            '''
    }
    {
      name: pattern_data_ch1_0_cg
      desc: '''
            Similar to pattern_data_ch0_0_cg.
            '''
    }
    {
      name: pattern_data_ch1_1_cg
      desc: '''
            Similar to pattern_data_ch0_1_cg.
            '''
    }

]

}